
1 / 3 · Click to enlarge
At a glance
Made by WAVESHARE, this multi-brand raspberry pi add on boards (hats) is a good fit for makers, students and electronics hobbyists. Main specs: power input 37V ~ 57V DC in; power output GPIO header: 5V 4.5A (MAX), 2P header: 12V 2A (MAX); network protocol IEEE 802.3af/at PoE.
Key Highlights
- Power Input: 37V ~ 57V DC in
- Power Output: GPIO header: 5V 4.5A (MAX), 2P header: 12V 2A (MAX)
- Network Protocol: IEEE 802.3af/at PoE
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Power Input | 37V ~ 57V DC in |
|---|---|
| Power Output | GPIO header: 5V 4.5A (MAX), 2P header: 12V 2A (MAX) |
| Network Protocol | IEEE 802.3af/at PoE |
| Interface | PCIe x1 for M.2 NVMe SSD |
| Shipping Weight | 0.11 kg |
| Shipping Dimensions | 9 × 8 × 4 cm |
Overview
The Waveshare PCIe To M.2 Adapter With PoE Function For Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, Raspberry Pi 5 PoE HAT, made by WAVESHARE, is listed in our multi-brand raspberry pi add on boards (hats) range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Power Input: 37V ~ 57V DC in
- Power Output: GPIO header: 5V 4.5A (MAX), 2P header: 12V 2A (MAX)
- Network Protocol: IEEE 802.3af/at PoE
- Interface: PCIe x1 for M.2 NVMe SSD (confirm your cable or board uses the same connector)
- Shipping Weight: 0.11 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 9 × 8 × 4 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Unlock the full potential of your Raspberry Pi 5 with the Waveshare PCIe to M.2 Adapter, designed for seamless integration with NVMe solid-state drives (SSDs). This adapter not only provides high-speed data transfer capabilities but also incorporates Power over Ethernet (PoE) functionality, making it an ideal choice for various applications, from data-intensive projects to IoT deployments.
Useful Link:
https://www.waveshare.com/wiki/PoE_M.2_HAT+Features:
- High-Speed NVMe Support: Connects M.2 NVMe SSDs for rapid read/write speeds.
- Power over Ethernet (PoE): Accepts 37V to 57V DC for efficient power delivery.
- Compact Design: Dimensions of 56.5 × 70.0 mm for easy integration.
- IEEE 802.3af/at Compliance: Compatible with standard PoE networks.
- Easy Installation: Simple plug-and-play setup with Raspberry Pi 5.
Package includes:
- PoE M.2 HAT+ x1
- Metal heatsink x1
- 16P-Cable-40mm x1
- Thermal tape (3PCS) x1
- Screws pack x1
Quick specs
- Power Input
- 37V ~ 57V DC in
- Power Output
- GPIO header: 5V 4.5A (MAX), 2P header: 12V 2A (MAX)
- Network Protocol
- IEEE 802.3af/at PoE
- Interface
- PCIe x1 for M.2 NVMe SSD
- Shipping Weight
- 0.11 kg
- Shipping Dimensions
- 9 × 8 × 4 cm



















