
1 / 5 · Click to enlarge
AI Summary
A single Raspberry Pi add-on board that combines an OLED display, real-time clock, AD/DA converter, pressure sensor, IR receiver, joystick and USB-to-UART bridge. It lets you prototype GPIO projects and sensor experiments without wiring lots of separate modules.
Key Highlights
- 0.96-inch 128x64 OLED display driven over SPI
- DS3231 high-precision RTC with backup battery holder
- PCF8591 8-bit AD/DA converter with screw terminal IO
- BMP280 pressure and temperature sensor on I2C
- CP2102 USB-to-UART for serial terminal control
- LFN0038K IR receiver, joystick, buzzer and dual LED
Ideal For
- Makers learning Raspberry Pi GPIO, I2C and SPI
- Students building sensor logging and timing projects
- Engineers prototyping with a compact all-in-one add-on
- Hobbyists wanting a headless serial terminal setup
- Educators teaching embedded basics with one board
Buying Tip
Check that your Raspberry Pi model is one of the supported boards (A+, B+, 2B or 3B) and plan for a backup battery if you want the DS3231 clock to keep time when powered off.
Elecvora expert review
Our verdict
The Pioneer600 is a practical consolidation board that saves bench space and wiring time for Raspberry Pi learners. It covers display, timekeeping, analogue input, environmental sensing and serial access in one compact unit.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide peripheral set on a single board
- OLED, RTC and sensors are ready to use
- Screw terminals simplify analogue wiring
- USB-to-UART enables headless control
Cons
- Supports older Pi models only, not newer boards
- Backup battery for the RTC is not stated as included
- Some peripherals share I2C, so address planning is needed
Best for
Makers and students wanting one board for GPIO and sensor practice
Not ideal for
Users with newer Raspberry Pi models outside the listed compatibility
Specifications
| Item Type | Other Board |
|---|---|
| Board Type | Expansion Board |
| Screen Type | OLED |
| Screen-Diagonal | 0.96" |
| Screen resolution | 128x64 px |
| Length (mm) | 60 |
| Width (mm) | 56 |
| Weight (g) | 100 |
| Shipping Weight | 0.116 kg |
| Shipping Dimensions | 7 × 6 × 3 cm |
What's in the box
- Waveshare Pioneer600 Raspberry Pi Expansion Board
- DS18B20 1-WIRE temperature sensor
Frequently Asked Questions
Which Raspberry Pi models does the Pioneer600 support?
Do I need to enable any interfaces on the Pi?
Does the board include a backup battery for the clock?
What can I connect to the screw terminals?
Can I use the board without a monitor?
What sensors and chips are on the board?
Overview
The Waveshare Pioneer600 is an expansion board that packs a broad set of peripherals onto one piece of hardware for Raspberry Pi projects. It connects through the standard 40-pin GPIO header and measures roughly 60 mm by 56 mm, so it sits neatly on top of the Pi without sprawling wiring across your desk. The idea is simple: instead of buying and connecting separate display, clock, sensor and interface modules, you get them together and can start experimenting straight away.
Because the board brings together a display, a real-time clock, an AD/DA converter, a pressure sensor, an IR receiver, a joystick and a USB-to-UART bridge, it works well as a general-purpose learning and prototyping platform. It is aimed at makers, students and engineers who want a tidy, repeatable setup for GPIO practice, sensor logging and small control projects.
Key Features
- OLED display: a 0.96-inch 128x64 panel driven by the SSD1306 controller over SPI, useful for showing readings, menus or status.
- Real-time clock: the DS3231 high-precision RTC keeps time with a backup battery holder, so timestamps survive power cycles.
- AD/DA conversion: the PCF8591 provides 8-bit conversion over I2C with a screw terminal IO interface for analogue signals.
- Environmental sensing: the BMP280 measures air pressure and temperature over I2C.
- GPIO expansion: the PCF8574 I/O expander adds more usable pins over I2C.
- Serial control: the CP2102 USB-to-UART converter lets you control the Pi through a serial terminal.
- Inputs and feedback: an LFN0038K IR receiver, joystick, buzzer and dual LED give you hands-on controls and indicators.
- 1-WIRE support: a dedicated interface for 1-WIRE devices, with a DS18B20 included.
Specifications Explained
The 0.96-inch OLED offers 128x64 pixels, which is enough for several lines of text or a simple graph, and it uses SPI so it does not compete heavily for I2C address space. The DS3231 RTC is a high-precision timekeeping chip; the battery holder means you can fit a backup cell so the clock keeps running when the Pi is off. The PCF8591 is an 8-bit AD/DA converter, so analogue readings are resolved to 256 steps, which is fine for learning, basic sensors and simple control loops. The screw terminal IO interface makes it easy to attach wires without soldering.
The BMP280 reports air pressure and temperature over I2C, giving you a compact way to add environmental data to a project. The PCF8574 expands the available I/O over I2C, which helps when a project needs more pins than the header conveniently offers. The CP2102 bridges USB to UART, so a serial terminal can be used to interact with the Pi. The LFN0038K IR receiver opens the door to remote-control input. Board dimensions of about 60 x 56 mm and a weight of around 100 g keep the add-on compact.
Compatibility and Requirements
The board supports Raspberry Pi A+, B+, 2 Model B and 3 Model B, and it uses the standard Raspberry Pi 40-pin GPIO extension header. A compatible Raspberry Pi board is required and is not included. You will also need a suitable power supply for the Pi and, for the real-time clock, a backup battery in the onboard holder. A USB connection is needed if you want to use the CP2102 serial terminal route.
Typical Uses
- Learning GPIO, I2C and SPI with a single tidy board.
- Logging temperature and pressure readings with timestamps from the RTC.
- Reading analogue sensors through the PCF8591 screw terminals.
- Building a small status display or menu with the OLED.
- Controlling a Pi headlessly through a serial terminal.
- IR remote experiments and simple joystick-driven projects.

Quick specs
- Item Type
- Other Board
- Board Type
- Expansion Board
- Screen Type
- OLED
- Screen-Diagonal
- 0.96"
- Screen resolution
- 128x64 px
- Length (mm)
- 60



















