
1 / 4 · Click to enlarge
AI Summary
A 10-channel 32-bit ADC HAT for Raspberry Pi built on the ADS1263, giving your projects high-resolution analog input over SPI. Its five differential inputs, PGA up to 32x and 38.4 kSPS rate make precise sensor and voltage measurements practical.
Key Highlights
- ADS1263 10-channel 32-bit ADC with five differential inputs
- Maximum sampling rate of 38.4 kSPS for responsive data capture
- Programmable gain amplifier with magnification up to 32
- SPI bus interface for straightforward Raspberry Pi connection
- Onboard AD header and screw terminals for flexible sensor wiring
- Three-wire RTD circuit available by soldering a 0R resistor
Ideal For
- Raspberry Pi makers building precision sensor data loggers
- Engineering students learning high-resolution ADC measurement
- Electronics hobbyists working with RTD temperature sensors
- Developers prototyping multi-channel analog instrumentation
- Lab and test setups needing low-noise voltage capture
Buying Tip
Confirm your Raspberry Pi has SPI enabled and check whether your sensor wiring needs differential or single-ended inputs before choosing terminal connections.
Elecvora expert review
Our verdict
A focused, well-equipped ADC HAT for Raspberry Pi users who need genuine 32-bit measurement rather than a basic microcontroller converter. The ADS1263, flexible input modes and RTD option make it a strong base for precision sensing projects.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 10-channel 32-bit ADS1263 conversion with five differential inputs
- PGA up to 32x and selectable internal or external reference
- Onboard AD header, screw terminals and external control header
- Three-wire RTD circuit available with a simple resistor solder
Cons
- Requires separate software setup for the ADS1263
- RTD function needs soldering to enable
- Analog input range is limited to the stated 2.5V and 5V maximums
Best for
Raspberry Pi precision measurement and sensor logging projects
Not ideal for
Users wanting a plug-and-play module with no configuration or soldering
Specifications
| Item Type | HAT |
|---|---|
| Compatibility | Pi Series |
| HAT Type | AD HAT |
| Sampling Rate | 38.4 kSPS |
| PGA Magnification(MAX) | 32 |
| Additional Specs. | BUS: SPI |
| Structure | Delta-Sigma |
| Input Type | differential, single-end |
| Reference Voltage | internal, external |
| Max. Input Voltage | 2.5V, 5V I |
| Input Voltage Min | -2.5V, 0V |
| Shipping Weight | 0.023 kg |
| Shipping Dimensions | 11 × 7 × 1 cm |
What's in the box
- 1 x High-Precision AD HAT
- 1 x Raspberry Pi screws pack (2 pieces)
Frequently Asked Questions
What is the maximum sampling rate of this HAT?
How many analog inputs does it provide?
Can I use an external voltage reference?
What input voltage range can it measure?
What is included with the HAT?
How do I enable the three-wire RTD circuit?
Overview
The Waveshare High-Precision AD HAT turns a Raspberry Pi into a capable analog measurement platform. At its centre is the ADS1263, a 10-channel 32-bit delta-sigma ADC that provides low noise and low temperature drift for projects where ordinary microcontroller ADCs are not accurate enough. Ten single-ended inputs or five differential pairs are available, and sampling reaches up to 38.4 kSPS.
Connection is made over the SPI bus, and the board includes an onboard AD header wired to the Waveshare sensor pinout, so compatible sensor modules can be attached directly. Screw terminals accept analog signals and analog power, while a separate control header allows another host to operate the module alongside or instead of a Raspberry Pi.
Key Features
- ADS1263 converter: 32-bit resolution across 10 channels, with five differential inputs for rejecting common-mode noise.
- Flexible gain: the programmable gain amplifier supports magnification up to 32, helping small signals use more of the ADC range.
- Reference options: choose the internal reference voltage or supply an external reference for your measurement chain.
- Wide input range: supports input voltages from -2.5V to 2.5V and 0V to 5V depending on configuration.
- RTD support: a three-wire resistor temperature detector circuit is present and enabled by soldering a 0R resistor.
- Practical layout: AD header, screw terminals and control header cover sensor modules, raw analog wiring and external control.
Specifications Explained
32-bit resolution means the converter divides its input range into very fine steps, which is valuable when reading small changes from load cells, thermocouples or precision references. 38.4 kSPS is the maximum sampling rate, so fast-changing signals can be captured while slower measurements can use lower rates for stability.
Differential and single-ended input modes let you measure either the voltage between two wires or the voltage on one wire relative to ground. The PGA boosts weak signals before conversion, and the internal or external reference choice affects how absolute readings are calculated. The SPI bus keeps wiring simple and is supported by the Raspberry Pi's standard interface.
Compatibility and Requirements
The HAT is designed for Raspberry Pi series boards. It communicates over SPI and requires a host with an SPI bus available. The analog input range depends on the selected reference and supply arrangement, with maximum input voltages of 2.5V and 5V and minimums of -2.5V and 0V. Software setup is not included in the box; plan to configure the SPI interface and use appropriate library support for the ADS1263.
Typical Uses
- Precision sensor data logging on a Raspberry Pi
- Temperature measurement with three-wire RTD sensors
- Laboratory and educational instrumentation projects
- Reading low-level analog signals from custom circuits
- Multi-channel voltage monitoring where resolution matters
What's in the Box
- 1 x High-Precision AD HAT
- 1 x Raspberry Pi screws pack (2 pieces)
Quick specs
- Item Type
- HAT
- Compatibility
- Pi Series
- HAT Type
- AD HAT
- Sampling Rate
- 38.4 kSPS
- PGA Magnification(MAX)
- 32
- Additional Specs.
- BUS: SPI



















