Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by WAVESHARE, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: item type Development Board; flash memory 8MB, 256KB; microcontroller R7FA4 (32-bit ARM Cortex-M4), ESP32-S3FN8 (Dual-core 32-bit Xtensa LX7). Check that your power source supplies Options for 5V/3.3V, support more shields before connecting it.

Key Highlights

  • Item Type: Development Board
  • Flash Memory: 8MB, 256KB
  • Microcontroller: R7FA4 (32-bit ARM Cortex-M4), ESP32-S3FN8 (Dual-core 32-bit Xtensa LX7)

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeDevelopment Board
Flash Memory8MB, 256KB
MicrocontrollerR7FA4 (32-bit ARM Cortex-M4), ESP32-S3FN8 (Dual-core 32-bit Xtensa LX7)
Clock FrequencyR7FA4: 48MHz, ESP32-S3FN8: 240MHz
Storage CapacityR7FA4: 256kB Flash, 32kB RAM, ESP32-S3FN8: 384kB ROM, 512kB RAM, 8MB Flash
Wireless Configuration2.4GHz WiFi + Bluetooth LE
Operating Voltage (V)Options for 5V/3.3V, support more shields
Input Power (W)6~24V
Shipping Weight0.110 kg
Shipping Dimensions15 × 11 × 5 cm

Overview

The Waveshare R7FA4 PLUS B Development Board, Compatible with Arduino UNO R4 WiFi, made by WAVESHARE, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Development Board
  • Flash Memory: 8MB, 256KB (more memory leaves room for larger programs and buffers)
  • Microcontroller: R7FA4 (32-bit ARM Cortex-M4), ESP32-S3FN8 (Dual-core 32-bit Xtensa LX7) (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Clock Frequency: R7FA4: 48MHz, ESP32-S3FN8: 240MHz (make sure the rest of your system works at this frequency)
  • Storage Capacity: R7FA4: 256kB Flash, 32kB RAM, ESP32-S3FN8: 384kB ROM, 512kB RAM, 8MB Flash (more memory leaves room for larger programs and buffers)
  • Wireless Configuration: 2.4GHz WiFi + Bluetooth LE (check your phone or controller supports the same Bluetooth version for full range)
  • Operating Voltage (V): Options for 5V/3.3V, support more shields (match this to your power supply; too high a voltage can damage the part)
  • Input Power (W): 6~24V

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

R7FA4 PlUS B combines the processing power of Renesas Electronics' RA4M1 microcontroller with the brand-new wireless connectivity capabilities of Espressif's ESP32-S3. In addition to this, the board also offers onboard 12x8 LED matrix, Qwiic connectors, VRTC, and OFF pins, catering to all potential needs for your next project. With R7FA4 PlUS B, you can easily upgrade your project and add wireless connectivity to extend the coverage of your current setup. If this is your first project, the board has everything you need to spark your creativity.

Connecting With Sorts Of Sensors:

 for reference only, please refer to the Package Content for detailed part list.    

Pinout Definition:

 

What's On Board:


Features:

  1. Based on R7FA4M1AB3CFM, and is compatible with Arduino UNO R4 Minima.
  2. Utilizes Renesas Electronics' RA4M1 (Arm® Cortex®-M4) microcontroller, with a main frequency of 48MHz.
  3. Onboard ESP32-S3-MINI-1 module, integrates 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, allowing the maker to use it for wireless communication. Combined with Arduino IoT Cloud, you can remotely monitor and control the projects.
  4. Onboard 12x8 red LED matrix, suitable for creative projects with animation or plotting sensor data, no additional hardware is required.
  5. Equipped with 256 kB Flash and 32 kB RAM, the expanded memory can easily handle complex projects.
  6. The R7FA4 Plus development board adds a 12-bit DAC, CAN bus, and operational amplifiers, providing expanded functionality and flexibility for designs.
  7. Onboard 5V/3.3V headers for easy voltage switching, allowing the use of more expansion modules.
  8. Flexible power options, supporting USB-C power supply or external input power VIN (6V<=VIN<=21V).
  9. Onboard power indicator LED (PWR), USER LED, serial port receive indicator LED (RX), and transmit indicator LED (TX), making it easy to monitor the working status of the development board.
  10. Onboard ICSP interface, can be used as an SPI interface. Supports user soldering of corresponding interface insertion into the experimental board.

Package Includes:

1 x Waveshare R7FA4 PLUS B Development Board, Compatible with Arduino UNO R4 WiFi

1 x USB Type-A to Type-C cable

Quick specs

Item Type
Development Board
Flash Memory
8MB, 256KB
Microcontroller
R7FA4 (32-bit ARM Cortex-M4), ESP32-S3FN8 (Dual-core 32-bit Xtensa LX7)
Clock Frequency
R7FA4: 48MHz, ESP32-S3FN8: 240MHz
Storage Capacity
R7FA4: 256kB Flash, 32kB RAM, ESP32-S3FN8: 384kB ROM, 512kB RAM, 8MB Flash
Wireless Configuration
2.4GHz WiFi + Bluetooth LE
See all specifications