Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by WAVESHARE, this multi-brand raspberry pi add on boards (hats) is a good fit for makers, students and electronics hobbyists. Main specs: item type HAT; compatibility Pi Series; hat type GSM HAT, GPRS HAT. Check that your power source supplies 5V before connecting it.

Key Highlights

  • Item Type: HAT
  • Compatibility: Pi Series
  • HAT Type: GSM HAT, GPRS HAT

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeHAT
CompatibilityPi Series
HAT TypeGSM HAT, GPRS HAT
Power Supply Voltage (V)5V
Logic level5V / 3.3V (default)
Operating Temperature (°C)-40℃ ~ 85℃
Frequency BandGSM: 850/900/1800/1900 MHz Quad-band auto search Compliant to GSM phase 2/2+
Emitting powerClass 4 (2W @ 900 MHz) Class 1 (1W @ 1800 MHz)
GPRS ConnectivityGPRS multi-slot class 12/10 (default) GPRS multi-slot class 1~12 (configurable)
SMSMT, MO, CB, Text, PDU SMS storage: SIM card
Audio input/output PortVoice encode/decode mode: Half Rate, Full Rate, Enhanced Full Rate, Adaptive Multi-Rate Support echo cancellation Support noise reduction
Dimensions (L x W x H) mm30.2 x 65
Weight (g)26
Shipping Weight0.05 kg
Shipping Dimensions8 × 6 × 4 cm

Overview

The Waveshare R800C GSM/GPRS HAT For Raspberry Pi, made by WAVESHARE, is listed in our multi-brand raspberry pi add on boards (hats) range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: HAT
  • Compatibility: Pi Series
  • HAT Type: GSM HAT, GPRS HAT
  • Power Supply Voltage (V): 5V (match this to your power supply; too high a voltage can damage the part)
  • Logic level: 5V / 3.3V (default)
  • Operating Temperature (°C): -40℃ ~ 85℃
  • Frequency Band: GSM: 850/900/1800/1900 MHz Quad-band auto search Compliant to GSM phase 2/2+ (make sure the rest of your system works at this frequency)
  • Emitting power: Class 4 (2W @ 900 MHz) Class 1 (1W @ 1800 MHz) (make sure the rest of your system works at this frequency)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The R800C GSM/GPRS HAT is a handy, low-power Raspberry Pi HAT which features multi-communication functionalities: GSM, GPRS, and phone calls, applicable to countries or regions with 2G network coverage, up to 85.6kbps GPRS speed. It allows your Pi to easily make a telephone call, send messages, connect to wireless Internet, and so on. Pin Structure:

Features:

  1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards and Jetson Nano
  2. Supports SMS, phone call, GPRS, TCP/IP, DTMF, HTTP, FTPl, etc.
  3. UART interface, for connecting controller boards like Arduino/STM32
  4. Onboard voltage translator, 3.3V by default, switch to 5V via jumper
  5. 2x LED indicators, easy to monitor the working status
  6. SIM card slot, supports 1.8V/3V SIM card
  7. Baudrate: 2400bps ~ 115200bps (115200bps by default)
  8. Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
  9. Supports SIM application toolkit: GSM 11.14 Release 99
  10. Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Package Includes:

1 x Waveshare R800C GSM/GPRS HAT For Raspberry Pi        

Quick specs

Item Type
HAT
Compatibility
Pi Series
HAT Type
GSM HAT, GPRS HAT
Power Supply Voltage (V)
5V
Logic level
5V / 3.3V (default)
Operating Temperature (°C)
-40℃ ~ 85℃
See all specifications