Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact development board combining the Raspberry Pi RP2350A microcontroller with an onboard XL2515 CAN controller for CAN bus projects. Its castellated edges and USB Type-C port make it easy to solder onto carrier boards and program.

Key Highlights

  • Raspberry Pi RP2350A dual-core Arm Cortex-M0+ processor at 133 MHz
  • Onboard XL2515 CAN controller for CAN bus communication
  • 2 MB flash memory and 264 KB SRAM onboard
  • USB Type-C connector with drag-and-drop mass storage programming
  • Castellated edges allow direct soldering to carrier boards
  • Compact 51 x 21 mm board weighing about 25 g

Ideal For

  • Embedded developers building CAN bus nodes
  • Automotive and industrial control prototypers
  • Makers learning CAN communication
  • Engineers designing custom carrier boards
  • Students working on networked microcontroller projects

Buying Tip

Confirm your CAN network wiring and termination are ready before soldering the board, since the XL2515 controller handles the bus but the physical layer parts are not included.

Elecvora expert review

Our verdict

A tidy, well-integrated board that saves you from wiring a separate CAN controller, and its castellated edges make it easy to build into custom hardware. It suits developers who already understand CAN bus basics and want a small RP2350A platform.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Onboard XL2515 CAN controller simplifies CAN projects
  • Compact 51 x 21 mm board with castellated edges
  • USB Type-C with drag-and-drop programming
  • Broad peripheral set including PIO state machines

Cons

  • CAN transceiver and bus wiring not included
  • Requires soldering for carrier board use
  • Limited to a 5.0 V supply

Best for

Developers building compact CAN bus nodes and custom carrier boards

Not ideal for

Beginners who want a plug-and-play, fully wired CAN kit

Specifications

Item TypeCAN Development Board
Flash Memory2 MB
Processor TypeARM Cortex-M0+
Clock Frequency133
Voltage Rating (V)5.0
CPUDual-core ARM Cortex-M0+
Current (mA)~60–100
ProcessorRaspberry Pi RP2350A
SRAM264 KB
Width (mm)21
USB ConnectorType-C
Length (mm)51
Weight (g)25
Max. Operating Current (A)120
Operating Temperature (°C)-20°C to +85°C
Shipping Weight0.12 kg
Shipping Dimensions15 × 10 × 5 cm

What's in the box

  • Waveshare RP2350 CAN Development Board Based On Raspberry Pi RP2350A with Onboard XL2515 CAN Controller

Frequently Asked Questions

What microcontroller does this board use?
It uses the Raspberry Pi RP2350A, a dual-core Arm Cortex-M0+ processor running at 133 MHz.
Does the board include a CAN transceiver?
The board includes the XL2515 CAN controller, but the CAN transceiver and bus wiring are not listed as included, so plan for those separately.
What power supply does it need?
It is rated for 5.0 V and typically draws about 60 to 100 mA during operation.
How do I program the board?
Connect it over USB Type-C and use drag-and-drop programming via mass storage to copy firmware onto the board.
Can I solder the board to another PCB?
Yes, the castellated module edges are designed so the board can be soldered directly onto a carrier board.
What is the operating temperature range?
The board is rated to operate from -20°C to +85°C.

Overview

The Waveshare RP2350 CAN Development Board is a compact controller board built around the Raspberry Pi RP2350A microcontroller and an onboard XL2515 CAN controller. It is intended for developers who need a small, solderable platform for CAN bus communication in automotive, industrial and embedded systems, where several devices exchange data over a shared network.

The board measures 51 x 21 mm and weighs roughly 25 g, so it fits into tight enclosures and custom carrier designs. Castellated module edges let you solder the board directly onto another PCB, while the USB Type-C connector keeps programming and power connection simple.

Key Features

  • RP2350A microcontroller: dual-core Arm Cortex-M0+ processor running at 133 MHz.
  • Onboard XL2515 CAN controller: handles CAN bus communication without extra controller hardware.
  • Memory: 2 MB flash and 264 KB SRAM for firmware and buffers.
  • USB Type-C: used for programming and power, with drag-and-drop mass storage support.
  • Castellated edges: solder the module directly to a carrier board.
  • Peripheral set: 2 x SPI, 2 x I2C, 2 x UART, 4 x 12-bit ADC and 16 controllable PWM channels.
  • Programmable I/O: 12 PIO state machines for custom peripheral support.

Specifications Explained

The dual-core Cortex-M0+ at 133 MHz provides enough headroom for CAN message handling alongside sensor reads and control logic. 2 MB of flash stores application code, while 264 KB of SRAM supports runtime buffers and stacks.

The XL2515 CAN controller is the key differentiator: it manages CAN frames so the main processor can focus on application tasks. The board is rated for a 5.0 V supply with typical current draw of about 60 to 100 mA, and it works across -20°C to +85°C, covering most indoor and protected outdoor installations.

On-chip features include an accurate clock and timer, a temperature sensor and accelerated floating-point libraries. The 12 PIO state machines allow custom peripheral behaviour when the standard interfaces are not enough.

Compatibility and Requirements

The board requires a 5.0 V power source and a USB Type-C connection for programming. CAN bus wiring and termination are not included and must be supplied as part of your network. Because the module uses castellated edges, it can be soldered to a carrier board or used with a suitable socket arrangement.

Typical Uses

  • CAN bus nodes in automotive and industrial control prototypes.
  • Embedded projects that need a small solderable controller module.
  • Learning and experimenting with CAN communication.
  • Custom carrier boards for networked sensor or actuator systems.

What's in the Box

The package contains one Waveshare RP2350 CAN Development Board based on the Raspberry Pi RP2350A with onboard XL2515 CAN controller.

Quick specs

Item Type
CAN Development Board
Flash Memory
2 MB
Processor Type
ARM Cortex-M0+
Clock Frequency
133
Voltage Rating (V)
5.0
CPU
Dual-core ARM Cortex-M0+
See all specifications