Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by WAVESHARE, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: item type Development Board; processor Dual-core Arm Cortex-M33, Dual-core Hazard 3 RISC-V; display IPS LCD.

Key Highlights

  • Item Type: Development Board
  • Processor: Dual-core Arm Cortex-M33, Dual-core Hazard 3 RISC-V
  • Display: IPS LCD

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeDevelopment Board
ProcessorDual-core Arm Cortex-M33, Dual-core Hazard 3 RISC-V
DisplayIPS LCD
Resolution160×80
Flash4MB
Display Size (Inch)0.96
SRAM520kB
Shipping Weight0.014 kg
Shipping Dimensions6 × 6 × 2 cm

Overview

The Waveshare RP2350-LCD-0.96 Development Board, With 0.96inch LCD Display, Based On RP2350A Dual-core &Dual-architecture Microcontroller, made by WAVESHARE, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Development Board
  • Processor: Dual-core Arm Cortex-M33, Dual-core Hazard 3 RISC-V (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Display: IPS LCD (measured diagonally; compare with the space you have before ordering)
  • Resolution: 160×80
  • Flash: 4MB (space for firmware, files or media)
  • Display Size (Inch): 0.96 (measured diagonally; compare with the space you have before ordering)
  • SRAM: 520kB
  • Shipping Weight: 0.014 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Waveshare RP2350-LCD-0.96 Development Board is a low-cost, high-performance Pico-like MCU board with flexible digital interfaces. Waveshare RP2350-LCD-0.96 Development Board incorporates Raspberry Pi's RP2350A microcontroller chip, the same as the one on Raspberry Pi Pico 2. For software development, either Raspberry Pi's C/C++ SDK, or the MicroPython is available, which makes it easy for you to get started, and integrate it into end products quickly. Waveshare RP2350-LCD-0.96 MCU Board, outline dimensions  

Features:

  1. RP2350A microcontroller chip designed by Raspberry Pi in the United Kingdom
  2. Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard 3 RISC-V processor,
  3. flexible clock running up to 150 MHz
  4. 520KB of SRAM, and 4MB of on-board Flash memory
  5. USB-C connector, keeps it up to date, easier to use
  6. 0.96inch 160×80 pixels 65K colorful IPS LCD display
  7. Lithium battery recharge/discharge header, suitable for mobile devices
  8. Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip, maximum 2A load current
  9. Castellated module allows soldering directly to carrier boards
  10. USB 1.1 with device and host support
  11. Low-power sleep and dormant modes
  12. Drag-and-drop programming using mass storage over USB
  13. 26 × multi-function GPIO pins
  14. 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels
  15. Accurate clock and timer on-chip
  16. Temperature sensor
  17. Accelerated floating-point libraries on-chip
  18. 12 × Programmable I/O (PIO) state machines for custom peripheral support

Package Includes:

1 x Waveshare RP2350-LCD-0.96 Development Board

Quick specs

Item Type
Development Board
Processor
Dual-core Arm Cortex-M33, Dual-core Hazard 3 RISC-V
Display
IPS LCD
Resolution
160×80
Flash
4MB
Display Size (Inch)
0.96
See all specifications