
1 / 3 · Click to enlarge
AI Summary
A low-cost Pico-like board built on the Raspberry Pi RP2350A dual-core, dual-architecture MCU with 16MB flash and a pre-soldered header. It gives you 26 GPIO pins, USB Type-C and drag-and-drop programming for quick embedded prototyping.
Key Highlights
- Raspberry Pi RP2350A with Arm Cortex-M33 and Hazard 3 RISC-V cores
- Up to 150 MHz clock speed with 520KB SRAM and 16MB flash
- USB Type-C with device and host support plus drag-and-drop programming
- 26 multi-function GPIO pins with SPI, I2C, UART, ADC and PWM
- MP28164 DC-DC buck-boost chip supporting up to 2A load current
- Pre-soldered header ready for breadboards and carrier boards
Ideal For
- Embedded developers exploring Arm and RISC-V on one board
- Makers building breadboard prototypes and sensor nodes
- Students learning microcontroller firmware and PIO programming
- IoT hobbyists needing 16MB flash and battery support
- Engineers prototyping motor, LED and servo control
Buying Tip
Check that your toolchain supports the RP2350A and decide whether you want to target the Arm Cortex-M33 or RISC-V core before flashing your first build.
Elecvora expert review
Our verdict
The RP2350-Plus-16MB-M packs a dual-architecture RP2350A, 16MB flash and a pre-soldered header into a low-cost board that is easy to prototype with. It is a practical choice for developers who want Arm and RISC-V flexibility without a complex setup.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Dual Arm Cortex-M33 and RISC-V cores on one board
- 16MB flash and 520KB SRAM for larger firmware
- Pre-soldered header ready for breadboards
- USB Type-C with device and host support
- Buck-boost power stage and lithium battery header
Cons
- No wireless connectivity on board
- Requires a separate USB cable and host computer
- Battery not included
Best for
Embedded prototyping and dual-architecture firmware development
Not ideal for
Projects that need built-in wireless networking out of the box
Specifications
| Item Type | Development Board |
|---|---|
| Model No. / Name | RP2350-Plus |
| Microcontroller | Embedded |
| Core | Unit |
| CPU | Processor |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 11 × 7 × 2 cm |
What's in the box
- 1 x Waveshare RP2350-Plus-16MB-M Development Board
Frequently Asked Questions
How do I program the RP2350-Plus-16MB-M?
Which cores can I use?
How is the board powered?
How much memory is available?
What is included in the package?
Does it support low-power operation?
Overview
The Waveshare RP2350-Plus-16MB-M is a Pico-like microcontroller board built on the Raspberry Pi RP2350A, a dual-core, dual-architecture chip that combines an Arm Cortex-M33 processor with a Hazard 3 RISC-V processor. It runs at up to 150 MHz and carries 520KB SRAM plus 16MB of on-board flash, giving you room for firmware, data logging and larger application images without an external memory chip.
The board ships with a pre-soldered header, so it can go straight into a breadboard or carrier board. A USB Type-C connector handles both device and host roles, and programming is done by drag-and-drop over USB mass storage.
Key Features
- Dual-architecture core: Arm Cortex-M33 and Hazard 3 RISC-V processors on one RP2350A chip.
- Generous memory: 520KB SRAM and 16MB on-board flash.
- Flexible power: MP28164 DC-DC buck-boost chip rated for up to 2A load current, plus a lithium battery recharge/discharge header.
- Rich I/O: 26 multi-function GPIO pins, 2 SPI, 2 I2C, 2 UART, 4 ADC and 16 PWM channels.
- PIO flexibility: 12 PIO state machines for custom digital interfaces.
- Low-power modes: sleep and dormant states for energy-sensitive builds.
- Extras: temperature sensor, accurate clock and timers, and accelerated floating-point libraries.
Specifications Explained
The dual-core design matters because you can target either the Arm Cortex-M33 or the RISC-V core depending on your toolchain and project goals, while the 150 MHz ceiling keeps control loops and signal processing responsive. The 520KB SRAM supports buffering for sensors and communications, and the 16MB flash removes the usual worry about firmware size.
On the connectivity side, two SPI, two I2C and two UART buses let you attach displays, sensors and radios at the same time. Four ADC channels cover analogue sensing, 16 PWM channels handle motors, LEDs and servos, and the 12 PIO state machines let you build custom timing-sensitive interfaces in software. USB 1.1 device and host support with a Type-C connector simplifies both programming and peripheral connections.
Power handling is more capable than a basic board: the MP28164 buck-boost chip supports up to 2A load current, and the lithium battery recharge/discharge header allows battery-backed operation. Sleep and dormant modes help extend runtime in portable designs.
Compatibility and Requirements
The board is programmed over USB through its Type-C connector using drag-and-drop mass storage, so no separate programmer is needed. You will need a USB cable and a host computer to load firmware. For battery operation, a compatible lithium battery connects to the on-board recharge/discharge header. Sensors, displays and other peripherals connect through the 26 multi-function GPIO pins and the SPI, I2C, UART, ADC and PWM interfaces.
Typical Uses
- Embedded firmware learning and dual-architecture experimentation
- IoT endpoints and sensor nodes
- Motor, LED and servo control with PWM
- Custom digital interfaces using PIO state machines
- Battery-powered portable projects
- Breadboard prototyping and carrier-board integration
What's in the Box
1 x Waveshare RP2350-Plus-16MB-M Development Board.

Quick specs
- Item Type
- Development Board
- Model No. / Name
- RP2350-Plus
- Microcontroller
- Embedded
- Core
- Unit
- CPU
- Processor
- Shipping Weight
- 0.015 kg



















