Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A Raspberry Pi HAT that stacks on the 40-pin GPIO header and adds a 9-axis IMU, barometer, temperature/humidity sensor, color sensor and 12-bit ADC over I2C. It lets a Pi measure motion, orientation and environmental conditions with minimal wiring.

Key Highlights

  • 9-axis ICM-20948 motion sensor for acceleration, rotation and magnetic field
  • SHTC3 sensor reports humidity from 0 to 100% rH and temperature from -30 to 100°C
  • LPS22HB barometer with 24-bit pressure resolution and ±0.025 hPa accuracy
  • TCS34725 4-channel RGBC color sensor with 16-bit resolution per channel
  • ADS1015 12-bit ADC and I2C header for adding external sensors
  • Standard 40-pin GPIO header fits Raspberry Pi series boards at 3.3 V

Ideal For

  • Raspberry Pi makers building environmental data loggers
  • Students learning sensor interfacing over I2C
  • Robotics hobbyists needing motion and orientation feedback
  • Engineers prototyping color or pressure sensing projects
  • Educators demonstrating multi-sensor data collection

Buying Tip

Check that your project can share the I2C bus, since the onboard sensors and any external devices connected through the HAT all communicate on the same interface.

Elecvora expert review

Our verdict

A well-rounded sensor HAT that packs motion, environmental and color sensing onto one board with simple I2C access. It is a practical choice for Pi users who want broad sensor coverage without wiring each part separately.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Multiple sensor types on a single board
  • Standard 40-pin header fits Raspberry Pi series boards
  • I2C extension and ADC for adding external sensors
  • Development resources and manual included

Cons

  • Raspberry Pi and external sensors are not included
  • All devices share the I2C bus, which can limit address conflicts
  • Requires enabling I2C and installing libraries before use

Best for

Raspberry Pi users who need motion and environmental sensing in one add-on board

Not ideal for

Projects that require a display or joystick, which this HAT does not include

Specifications

Item TypeHAT
CompatibilityPi Series
HAT TypeSense HAT
Operating Voltage (VDC)3.3
InterfaceI2C
Accelerometer TypeResolution: 16-bit Ranging: ±2/±4/±8/±16g
GyroscopeResolution: 16-bits Ranging: ±250/±500/±1000/±2000°/sec
MagnetometerResolution: 16-bits Ranging: ±4900µT
BarometerResolution: 24-bits (Pressure), 16-bits(Temperature) Accuracy: ±0.025hPa Speed: 1 Hz - 75 Hz
Temperature and HumidityAccuracy (humidity):±2% rH Ranging(humidity): 0% ~ 100% rH Accuracy(temperature): ±0.2°C Ranging(temperature): -30 ~ 100°C
SensorResolution: 4-channels RGBC, 16-bits per channel, Color Recognition Sensor
ADC / DACResolution: 12-bits
Length (mm)65
Width (mm)30.5
Weight (g)19
Shipping Weight0.025 kg
Shipping Dimensions7 × 3 × 2 cm

What's in the box

  • 1 x Sense HAT (B)
  • 1 x RPi screws pack (2 pcs)
  • 1 x 2x20-pin female header

Frequently Asked Questions

What sensors are built into this HAT?
It includes a 9-axis ICM-20948 motion sensor, an SHTC3 temperature and humidity sensor, an LPS22HB barometer, a TCS34725 RGBC color sensor and an ADS1015 12-bit ADC.
Which Raspberry Pi boards does it work with?
The board uses the standard 40-pin GPIO header and supports Raspberry Pi series boards, operating over I2C at 3.3 V.
Is a Raspberry Pi included?
No. The Raspberry Pi and any external sensors are not included; the package contains the HAT, a screws pack and a 2x20-pin female header.
Can I connect additional sensors?
Yes. An I2C extension header and an external sensor interface are provided, and the ADS1015 ADC adds 12-bit analog input capability.
What voltage does the board use?
The HAT operates at 3.3 V and includes onboard level translation and regulation for its devices.
Where can I find example code?
Development resources and a manual are included, with examples for Raspberry Pi and STM32.

Overview

The Waveshare Sense HAT (B) is a compact sensor board designed to sit on top of a Raspberry Pi. It uses the standard 40-pin GPIO header and talks to the Pi over I2C at 3.3 V, so no breadboard or loose jumper wiring is required for the onboard sensors. Once the board is fitted, your code can read movement, orientation, magnetic field, air pressure, temperature, humidity and nearby color.

The board measures 65 mm by 30.5 mm and weighs about 19 g, so it adds very little bulk to a Pi-based build. An I2C extension header and a dedicated external sensor interface are provided for projects that need more inputs than the onboard set.

Key Features

  • ICM-20948 9-axis sensor: combines a 3-axis accelerometer, 3-axis gyroscope and 3-axis magnetometer.
  • SHTC3: digital temperature and humidity sensing for environmental monitoring.
  • LPS22HB: barometric pressure measurement with high resolution and accuracy.
  • TCS34725: four-channel RGBC color recognition.
  • ADS1015: 12-bit ADC for analog expansion.
  • Level shifting and regulation: LSF0204PWR translator plus 1.8 V and 3.3 V regulators support the onboard devices.

Specifications Explained

The accelerometer offers 16-bit resolution across ±2, ±4, ±8 and ±16 g ranges, which covers gentle tilt sensing through to sharper impacts. The gyroscope also resolves 16 bits, with ranges from ±250 to ±2000 °/sec for slow rotation tracking or fast spins. The magnetometer provides 16-bit readings up to ±4900 µT for heading and magnetic field experiments.

For environment work, the barometer resolves pressure at 24 bits and temperature at 16 bits, with ±0.025 hPa accuracy and selectable output speeds from 1 Hz to 75 Hz. The humidity sensor is rated at ±2% rH accuracy across 0 to 100% rH, while temperature accuracy is ±0.2°C between -30 and 100°C. The color sensor reads four RGBC channels at 16 bits each, and the ADS1015 ADC adds 12-bit analog input capability.

Compatibility and Requirements

The HAT supports Raspberry Pi series boards through the 40-pin GPIO connector and operates at 3.3 V over I2C. The I2C control pins can also be used to connect other host boards such as STM32 devices. A Raspberry Pi and any external sensors are not included. Development resources and a manual with examples for Raspberry Pi and STM32 are provided.

Typical Uses

Use the board to log room temperature, humidity and pressure over time, detect orientation and movement in a small robot, read compass heading for navigation experiments, identify colors in a sorting project, or feed extra analog sensors through the ADC. It also works well for classroom demonstrations of sensor data collection.

What's in the Box

  • 1 x Sense HAT (B)
  • 1 x RPi screws pack (2 pcs)
  • 1 x 2x20-pin female header
Waveshare Sense HAT (B) for Raspberry Pi, Multi Powerful Sensors

Quick specs

Item Type
HAT
Compatibility
Pi Series
HAT Type
Sense HAT
Operating Voltage (VDC)
3.3
Interface
I2C
Accelerometer Type
Resolution: 16-bit Ranging: ±2/±4/±8/±16g
See all specifications