Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by WAVESHARE, this multi-brand raspberry pi add on boards (hats) is a good fit for makers, students and electronics hobbyists. Main specs: item type HAT; hat type Servo Driver HAT; controller ESP32-WROOM-32. Check that your power source supplies 9~25V before connecting it.

Key Highlights

  • Item Type: HAT
  • HAT Type: Servo Driver HAT
  • Controller: ESP32-WROOM-32

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeHAT
HAT TypeServo Driver HAT
ControllerESP32-WROOM-32
Power Supply Voltage (V)9~25V
CommunicationUART, USB Type-C port × 2
Wireless Configuration2.4G WiFi
Mounting Hole Diameter (mm)3
Mounting Hole PCD (mm)58×49 mm
Shipping Weight0.095 kg
Shipping Dimensions11 × 8 × 3 cm

Overview

The Waveshare Serial Bus Servo Driver HAT, Integrates ESP32 and Servo Control Circuit, Suitable for ST / RSBL Series Serial Bus Servos, made by WAVESHARE, is listed in our multi-brand raspberry pi add on boards (hats) range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: HAT
  • HAT Type: Servo Driver HAT
  • Controller: ESP32-WROOM-32
  • Power Supply Voltage (V): 9~25V (match this to your power supply; too high a voltage can damage the part)
  • Communication: UART, USB Type-C port × 2 (confirm your cable or board uses the same connector)
  • Wireless Configuration: 2.4G WiFi (2.4 GHz reaches further, 5 GHz is faster at short range)
  • Mounting Hole Diameter (mm): 3
  • Mounting Hole PCD (mm): 58×49 mm

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

his is a driver board specifically designed for serial bus servos, integrating an ESP32 and serial bus servo control circuits. It features onboard RS485 and TTL serial bus servo interfaces. We have open-sourced the serial bus servo control demos and JSON communication interface. Users can connect via USB and use a host computer to send JSON formatted commands to control the serial bus servos and receive JSON formatted feedback (such as servo torque, speed, position, etc.). Users can also perform secondary development on it, using it as a slave controller in their robotics projects.

Feature:

  1. Allows controlling up to 253 ST/RSBL series serial bus servos at the same time.
  2. 9~25V wide voltage input (the input voltage and the servo voltage must be matched).
  3. Based on the ESP32-WROOM-32 module, supports wired and wireless communication.
  4. Provides multiple control demos for different host controllers.
  5. Supports controlling the serial bus servos directly via onboard USB Type-C port.
  6. Supports connecting to Raspberry Pi, powering the Pi via integrated 5V buck regulator circuit and communicating through GPIO UART interface, neat cable management.

Package Includes:

1 x Bus Servo Driver HAT (A)

1 x 2×20 pin header

1 x USB-A to USB-C cable

1 x Screws pack

Quick specs

Item Type
HAT
HAT Type
Servo Driver HAT
Controller
ESP32-WROOM-32
Power Supply Voltage (V)
9~25V
Communication
UART, USB Type-C port × 2
Wireless Configuration
2.4G WiFi
See all specifications