Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by WAVESHARE, this multi-brand raspberry pi add on boards (hats) is a good fit for makers, students and electronics hobbyists. Main specs: item type HAT; compatibility Pi Series; hat type Expansion HAT. Check that your power source supplies 3.3 before connecting it.

Key Highlights

  • Item Type: HAT
  • Compatibility: Pi Series
  • HAT Type: Expansion HAT

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeHAT
CompatibilityPi Series
HAT TypeExpansion HAT
Operating Voltage (VDC)3.3
Expansion chipSC16IS752
InterfaceI2C
Mounting Hole Diameter (mm)3
Length (mm)65
Width (mm)30
Weight (g)16
Shipping Weight0.02 kg
Shipping Dimensions7 × 3 × 3 cm

Overview

The Waveshare Serial Expansion HAT for Raspberry Pi, made by WAVESHARE, is listed in our multi-brand raspberry pi add on boards (hats) range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: HAT
  • Compatibility: Pi Series
  • HAT Type: Expansion HAT
  • Operating Voltage (VDC): 3.3 (match this to your power supply; too high a voltage can damage the part)
  • Expansion chip: SC16IS752
  • Interface: I2C (confirm your cable or board uses the same connector)
  • Mounting Hole Diameter (mm): 3
  • Length (mm): 65 (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

There is only a 1-ch UART port on the original Raspberry Pi, once it is used for terminal debugging, no other serial device is allowed. What a poor situation. Now you have 2-ch extra UART, plus 8 programmable GPIOs, just bring this Serial Expansion HAT. The SC16IS752 is an I2C-bus/SPI bus interface to a dual-channel high-performance UART. It also provides the application with 8 additional programmable I/O pins. This module uses an I2C interface by default, and its device address is hardware configurable by A0 and A1.

Features:

  1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
  2. Onboard SC16IS752, expands 2-ch UART and 8 programmable GPIO through I2C, no extra pin required
  3. It is stackable up to 16 this module by setting the address jumper, which means up to 32-ch UART
  4. Onboard multi LEDs for indicating the UART working status
  5. Reserved I2C control pins, allows working with other control boards
  6. Comes with development resources and manual (examples in C and python)

Package Includes:

1 x Serial Expansion HAT

1 x RPi screws pack (2pcs)

1 x PH2.0 6PIN wire

Quick specs

Item Type
HAT
Compatibility
Pi Series
HAT Type
Expansion HAT
Operating Voltage (VDC)
3.3
Expansion chip
SC16IS752
Interface
I2C
See all specifications