Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by WAVESHARE, this multi-brand raspberry pi add on boards (hats) is a good fit for makers, students and electronics hobbyists. Main specs: item type HAT; compatibility Pi Series; hat type Servo Driver HAT. Check that your power source supplies 5V (Pi connector) OR 6V~12V (VIN terminal) before connecting it.

Key Highlights

  • Item Type: HAT
  • Compatibility: Pi Series
  • HAT Type: Servo Driver HAT

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeHAT
CompatibilityPi Series
HAT TypeServo Driver HAT
Input Voltage (V)5V (Pi connector) OR 6V~12V (VIN terminal)
Logic Input (V)3.3
DriverPCA9685
InterfaceI2C
Mounting Hole Diameter (mm)3
Length (mm)65
Width (mm)30
Weight (g)22
Shipping Weight0.022 kg
Shipping Dimensions9 × 7 × 1 cm

Overview

The Waveshare Servo Driver HAT (B) for Raspberry Pi, 16-Channel, 12-bit, I2C, made by WAVESHARE, is listed in our multi-brand raspberry pi add on boards (hats) range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: HAT
  • Compatibility: Pi Series
  • HAT Type: Servo Driver HAT
  • Input Voltage (V): 5V (Pi connector) OR 6V~12V (VIN terminal) (match this to your power supply; too high a voltage can damage the part)
  • Logic Input (V): 3.3
  • Driver: PCA9685
  • Interface: I2C (confirm your cable or board uses the same connector)
  • Mounting Hole Diameter (mm): 3

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a Waveshare Servo Driver HAT (B) for Raspberry Pi, 16-Channel, 12-bit, I2C. Needless to say, the Raspberry Pi is powerful enough in most cases, yet it's not that good at providing precise PWM output. You may have tried to control a robotic arm or a hexapod walker by using the Pi, but finally, get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver HAT for you.

This HAT can be used to drive servos such as:
  • SG90 Servo
  • MG90S Servo
  • MG996R Servo
Note: Raspberry pi is not included in this kit. You have to buy it separately

Features:

  1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  2. I2C controlled, using only 2 pins
  3. Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales)
  4. Integrates 5V regulator, up to 3A output current, can be powered from the battery through VIN terminal
  5. Standard servo interface supports commonly used servo such as SG90, MG90S, MG996R, etc.
  6. Reserved I2C control pins, allows working with other control boards
  7. Comes with development resources and manual (examples in python like Bluetooth/WiFi remote control)

Package Includes:

1 x Waveshare Servo Driver HAT (B) for Raspberry Pi 16-Channel 12-bit I2C

Quick specs

Item Type
HAT
Compatibility
Pi Series
HAT Type
Servo Driver HAT
Input Voltage (V)
5V (Pi connector) OR 6V~12V (VIN terminal)
Logic Input (V)
3.3
Driver
PCA9685
See all specifications