
1 / 11 · Click to enlarge
At a glance
Made by WAVESHARE, this multi-brand raspberry pi add on boards (hats) is a good fit for makers, students and electronics hobbyists. Main specs: item type HAT; compatibility Pi Series; hat type GNSS HAT.
Key Highlights
- Item Type: HAT
- Compatibility: Pi Series
- HAT Type: GNSS HAT
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | HAT |
|---|---|
| Compatibility | Pi Series |
| HAT Type | GNSS HAT |
| Model No. / Name | Microcontroller |
| Supported | dial-up, phone calls, SMS, TCP, UDP, MQTT, HTTP(S), FTP(S) |
| GNSS | GPS, Beidou, Glonass, Galileo, QZSS, LBS base station |
| USB | 2.0/3.0 |
| Max. Operating Current (A) | 3A |
| Shipping Weight | 0.05 kg |
| Shipping Dimensions | 10 × 7 × 3 cm |
Overview
The Waveshare SIM7600G-H M.2 4G HAT for Raspberry Pi, LTE CAT4 High Speed, 4G/3G/2G, GNSS, Global Band, made by WAVESHARE, is listed in our multi-brand raspberry pi add on boards (hats) range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: HAT
- Compatibility: Pi Series
- HAT Type: GNSS HAT
- Model No. / Name: Microcontroller (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Supported: dial-up, phone calls, SMS, TCP, UDP, MQTT, HTTP(S), FTP(S) (confirm your cable or board uses the same connector)
- GNSS: GPS, Beidou, Glonass, Galileo, QZSS, LBS base station
- USB: 2.0/3.0
- Max. Operating Current (A): 3A (your supply must deliver at least this much current)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Supports dial-up, phone calls, SMS, TCP, UDP, MQTT, HTTP(S), FTP(S), and so on
- GNSS positioning: GPS, Beidou, Glonass, Galileo, QZSS, LBS base station
- USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high-speed 4G communication
- Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino
- The onboard USB-C connector, enabled via a switch, for connecting the standalone power supply for the module, allows more loads, a stable and flexible power supply
- Onboard power supply on/off switch, reset button, and LED indicator, easy to turn on/off the module or monitor the operating status
- Reserved 4x SMA to IPEX antenna interfaces, with pre-soldered 2x connectors for easily using antennas, allows changing the SMA antenna position
- Onboard audio jack and audio decoder, allow audio operation like making a phone call
- High-efficiency power supply circuit, up to 3A output current
Useful link:
waveshare SIM7600G-H-M2 4G HATPackages Includes:
1 x Waveshare SIM7600G-H M.2 4G HAT for Raspberry Pi, LTE CAT4 High Speed, 4G/3G/2G, GNSS, Global Band 1 x M.2 TO 4G/5G HAT 1 x SIM7600G-H-M.2 1 x Antenna 2pcs 1 x IPEX adapter cable 2pcs 1 x 2*20PIN pin header 1 x Passive GPS antenna 1 x Dual plug USB3.0 cable 1 x USB3.0 adapter 1 x USB2.0 adapter 1 x SMA protective cap 2pcs 1 x Screws packQuick specs
- Item Type
- HAT
- Compatibility
- Pi Series
- HAT Type
- GNSS HAT
- Model No. / Name
- Microcontroller
- Supported
- dial-up, phone calls, SMS, TCP, UDP, MQTT, HTTP(S), FTP(S)
- GNSS
- GPS, Beidou, Glonass, Galileo, QZSS, LBS base station



















