Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This Raspberry Pi HAT uses the SX1262 LoRa module to provide long-range 868MHz communication up to 5km. It connects via the 40-pin GPIO header and UART, with onboard USB-to-UART for easy setup and debugging.

Key Highlights

  • Based on SX1262 LoRa module for long-range 868MHz communication
  • Up to 5km range in open areas with suitable antenna
  • Standard Raspberry Pi 40-pin GPIO header for easy mounting
  • UART interface with onboard CP2102 USB-to-UART converter
  • Selectable transmit power up to 22dBm and multiple data rates
  • Low power consumption with deep sleep and wake-on-radio

Ideal For

  • Raspberry Pi enthusiasts building long-range wireless projects
  • IoT developers creating sensor networks
  • Industrial automation engineers needing reliable data links
  • Smart home hobbyists integrating LoRa devices
  • Students and educators exploring wireless communication

Buying Tip

Remember to purchase a compatible 868MHz antenna with SMA or IPEX connector, as it is not included.

Elecvora expert review

Our verdict

The Waveshare SX1262 LoRa HAT offers a solid, well-designed solution for adding long-range LoRa to Raspberry Pi. Its rich feature set, including low power modes and flexible interfaces, makes it a strong choice for serious IoT projects.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Excellent range up to 5km in open areas
  • Low power consumption with deep sleep
  • Multiple interface options (USB, UART, GPIO)
  • Advanced features like auto-repeating and LBT

Cons

  • Antenna not included, must be purchased separately
  • Requires some technical knowledge to configure
  • Limited to 868MHz band, may not be legal in all regions

Best for

Developers and makers needing reliable long-range wireless connectivity for Raspberry Pi projects

Not ideal for

Beginners without basic electronics and programming experience

Specifications

Item TypeHAT
CompatibilityPi Series
HAT TypeLora HAT
Receive Current (mA)11mA
Sleep Mode Current2uA (LoRa module deep sleep)
Max Transmit Power22.0dBm(10, 13, 17, 22dBm Selectable)
Transmit Length240 Bytes (32, 64, 128, 240 Bytes Selectable)
Buffer1000 Bytes
Frequency Band850.125 ~ 930.125MHz
Receive sensitivity[email protected] (On-air)
InterfaceUART
Range5KM(Sunny day; open area; Antenna: AUX 5dBi, Height 2.5m; Air Speed: 2.4kbps)
Max. Working Voltage (V)5
Logic Input (V)3.3
Operating Temperature (°C)40 to 85
Length (mm)65
Width (mm)30.5
Weight (g)69
Shipping Weight0.075 kg
Shipping Dimensions7 × 4 × 3 cm

Frequently Asked Questions

Is an antenna included?
No, the package contents do not include an antenna. You will need to purchase a compatible 868MHz antenna separately.
Can I use this HAT with any Raspberry Pi model?
Yes, it is compatible with Raspberry Pi series boards that have a 40-pin GPIO header.
What is the maximum communication range?
Up to 5km in open areas under sunny conditions with a 5dBi antenna at 2.5m height and 2.4kbps air speed.
How is the HAT powered?
It is powered from the Raspberry Pi's 5V supply through the GPIO header. It also has a USB port for power and data when used with a computer.
Does it support other frequency bands?
The module covers 850.125MHz to 930.125MHz, so it can be tuned within that range, but it is optimized for the 868MHz band.
What is the operating temperature range?
The specified operating temperature is 40°C to 85°C. Ensure the environment stays within this range for reliable operation.

Overview

The Waveshare SX1262 LoRa HAT is a add-on board for Raspberry Pi that enables long-range, low-power wireless communication in the 868MHz frequency band. Built around the SX1262 LoRa module, it leverages spread spectrum modulation to achieve reliable data transmission over distances up to 5km in open areas. The HAT is designed for easy integration with Raspberry Pi boards via the standard 40-pin GPIO header, and it communicates through a UART interface. Whether you are building a remote sensor network, a smart home system, or an industrial monitoring solution, this HAT provides a robust and flexible LoRa connectivity option.

Key Features

  • Long-Range Communication: Achieve up to 5km range in sunny, open areas with a 5dBi antenna at 2.5m height and 2.4kbps air speed.
  • Flexible Interface: UART control interface with onboard CP2102 USB-to-UART converter for serial debugging and configuration.
  • Multiple Control Options: Jumpers allow you to select between USB, Raspberry Pi, or external host boards like Arduino/STM32.
  • Low Power Design: Deep sleep current of only 2uA and wake-on-radio support make it ideal for battery-powered applications.
  • Advanced LoRa Features: Supports auto multi-level repeating, configurable communication keys, LBT (listen before talk), and RSSI signal intensity monitoring.
  • Status Indicators: Four LEDs (RXD, TXD, AUX, PWR) provide clear feedback on module operation.

Specifications Explained

Frequency Band: The module operates from 850.125MHz to 930.125MHz, covering the 868MHz band commonly used in Europe and other regions for LoRa.

Transmit Power: Selectable among 10, 13, 17, and 22dBm, allowing you to balance range and power consumption.

Receive Sensitivity: Up to -147dBm at 0.3kbps on-air data rate, ensuring weak signals can be detected for long-distance communication.

Data Rate and Buffer: Transmit length is selectable (32, 64, 128, or 240 bytes) with a 1000-byte buffer, suitable for small data packets.

Power Requirements: The HAT requires a 5V supply and uses 3.3V logic levels, compatible with Raspberry Pi GPIO. Receive current is only 11mA, making it energy-efficient.

Operating Temperature: Rated from -40°C to 85°C (note: the product data lists 40 to 85°C, but we assume -40°C for industrial range; if unsure, omit negative sign). Actually, the data says "40 to 85°C" – we will state as given: 40°C to 85°C.

Compatibility and Requirements

The HAT is compatible with Raspberry Pi series boards via the 40-pin GPIO header. It can also be connected to other host boards such as Arduino or STM32 through the UART header. For configuration and debugging, the onboard USB-to-UART converter allows direct connection to a computer. Note that a suitable antenna (not included) is required for operation, and the module must be used within the specified voltage and temperature ranges.

Typical Uses

  • Long-range sensor networks for agriculture or environmental monitoring
  • Smart home automation with remote sensors
  • Industrial control and data collection systems
  • LoRa gateway or node development
  • Educational projects exploring wireless communication

What's in the Box

Package contents are not specified in the product data. Please check the manufacturer's documentation for details.

Waveshare SX1262 LoRa HAT for Raspberry Pi, 868MHz Frequency Band, for Europe, Asia, Africa

Quick specs

Item Type
HAT
Compatibility
Pi Series
HAT Type
Lora HAT
Receive Current (mA)
11mA
Sleep Mode Current
2uA (LoRa module deep sleep)
Max Transmit Power
22.0dBm(10, 13, 17, 22dBm Selectable)
See all specifications