Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A Raspberry Pi HAT built on the SX1268 LoRa module for 433MHz long-range serial data links. It offers up to 22dBm transmit power, 5km open-air range and 2uA deep sleep for low-power projects.

Key Highlights

  • SX1268 LoRa module covering the 410.125 to 493.125MHz frequency band
  • Selectable transmit power of 10, 13, 17 or 22dBm
  • Receive sensitivity down to -147dBm at 0.3Kbps on-air
  • Deep sleep current of just 2uA with Wake on Radio support
  • Onboard CP2102 USB-to-UART converter and 4 status LEDs
  • Standard 40-pin GPIO header for Raspberry Pi series boards

Ideal For

  • Raspberry Pi makers building long-range sensor networks
  • Industrial control and remote monitoring integrators
  • Smart home hobbyists needing a 433MHz serial link
  • Arduino and STM32 users adding a LoRa HAT
  • Data collection projects in open outdoor areas

Buying Tip

Confirm your antenna choice and connector type before ordering, since range figures assume a 5dBi antenna at 2.5m height in open air.

Elecvora expert review

Our verdict

A well-rounded LoRa HAT that gives Raspberry Pi users a straightforward UART path to long-range 433MHz communication. The low sleep current, selectable power and repeating features make it flexible for both bench testing and field deployment.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Simple UART control with USB debugging option
  • Low 2uA deep sleep and Wake on Radio
  • Selectable transmit power and packet length
  • Auto repeating and LBT for difficult environments

Cons

  • Antenna is not confirmed as included
  • Range depends heavily on antenna and site conditions
  • Requires separate host board and power planning

Best for

Makers and integrators building long-range 433MHz serial links around a Raspberry Pi

Not ideal for

Users wanting a plug-and-play consumer radio without configuration

Specifications

Item TypeHAT
CompatibilityPi Series
HAT TypeLora HAT
Receive Current (mA)11mA
Sleep Mode Current2uA (LoRa module deep sleep)
Max Transmit Power22.0dBm(10, 13, 17, 22dBm Selectable)
Transmit Length240 Bytes (32, 64, 128, 240 Bytes Selectable)
Buffer1000 Bytes
Frequency Band410.125 ~ 493.125MHz
Receive sensitivity[email protected] (On-air)
InterfaceUART
Range5KM(Sunny day; open area; Antenna: AUX 5dBi, Height 2.5m; Air Speed: 2.4kbps)
Max. Working Voltage (V)5
Logic Input (V)3.3
Operating Temperature (°C)40 to 85
Length (mm)65
Width (mm)30.5
Weight (g)69
Shipping Weight0.091 kg
Shipping Dimensions7 × 4 × 3 cm

Frequently Asked Questions

Which Raspberry Pi boards does this HAT support?
It uses a standard 40-pin GPIO header and is listed as compatible with Raspberry Pi series boards.
What frequency band does the SX1268 module use?
The module covers the 410.125 to 493.125MHz band, centered on the 433MHz region.
How is the HAT powered and what logic level does it use?
Maximum working voltage is 5V and logic input is 3.3V, so match your host board accordingly.
Can I use it with an Arduino or STM32?
Yes. A UART header is provided for host boards such as Arduino and STM32.
What is the maximum transmit power?
You can select 10, 13, 17 or 22dBm, with 22dBm as the maximum.
Does it support low-power battery operation?
The LoRa module supports deep sleep at 2uA and Wake on Radio, which suits battery-powered nodes.

Overview

The Waveshare SX1268 LoRa HAT adds a long-range, low-power radio link to Raspberry Pi projects. It is built around the SX1268 LoRa module and operates across the 410.125 to 493.125MHz band, giving your Pi a serial data channel that can reach up to 5km in open, sunny conditions with a suitable 5dBi antenna mounted at 2.5m and a 2.4kbps air speed.

Control is handled over UART, so the board works with the Pi itself or with host boards such as Arduino and STM32. An onboard CP2102 USB-to-UART converter and jumper options let you switch between USB debugging and direct Raspberry Pi control without extra adapters.

Key Features

  • LoRa spread spectrum modulation for longer distance and better interference resistance than conventional narrowband links.
  • Selectable transmit power of 10, 13, 17 or 22dBm to balance range and power draw.
  • Low-power design with 2uA deep sleep and Wake on Radio, useful for battery-backed nodes.
  • Auto multi-level repeating to extend links across very long distances and allow multiple networks in one area.
  • Customizable communication key that cannot be retrieved, improving data security.
  • LBT and RSSI support for checking channel noise before transmitting and evaluating signal quality.
  • Four LED indicators for power, auxiliary status, and UART RX/TX activity.

Specifications Explained

The 22dBm maximum transmit power is the top of four selectable levels, letting you trade output for lower current draw when range is not critical. Receive current is listed at 11mA, while the module can drop to 2uA in deep sleep, which matters for remote or solar-powered installations.

Transmit length is selectable at 32, 64, 128 or 240 bytes with a 1000-byte buffer, so you can tune packet size to your data pattern. The UART interface and 3.3V logic input keep wiring simple, and the board accepts up to 5V working voltage. The 65 x 30.5mm board weighs 69g and is rated for -40 to 85 degrees Celsius operation.

Compatibility and Requirements

The HAT uses a standard Raspberry Pi 40-pin GPIO header and supports Raspberry Pi series boards. A UART header is provided for host boards such as Arduino and STM32. Logic input is 3.3V, so check that your host board matches. An SMA antenna connector and an IPEX connector are available for antenna options.

Typical Uses

Industrial control links, smart home sensor networks, remote data collection, and any project needing a long-range serial bridge between a Pi and a distant node. The repeating and channel monitoring features help in crowded or difficult radio environments.

What's in the Box

Package contents are not specified for this listing. Please check the product packaging or contact the seller for the exact included items.

Waveshare SX1262 LoRa HAT for Raspberry Pi, 868MHz Frequency Band, for Europe, Asia, Africa

Quick specs

Item Type
HAT
Compatibility
Pi Series
HAT Type
Lora HAT
Receive Current (mA)
11mA
Sleep Mode Current
2uA (LoRa module deep sleep)
Max Transmit Power
22.0dBm(10, 13, 17, 22dBm Selectable)
See all specifications