
1 / 3 · Click to enlarge
AI Summary
The Waveshare USB AVR JTAGICE XPII is a debugger and programmer for AVR and AVR32 microcontrollers, compatible with Atmel JTAGICE mkII. It supports on-chip debugging and programming via JTAG, PDI, or debugWIRE, with USB and RS232 PC interfaces and a wide 2.1-5.5V target voltage range.
Key Highlights
- Supports all AVR and AVR32 MCUs with on-chip debug capability
- Compatible with AVR Studio 4, 5, 6 or higher
- USB 1.1 and RS232 interfaces for PC connection
- JTAG, PDI, and debugWIRE interfaces to target
- Target voltage range 2.1V to 5.5V
- Can be powered from USB bus or 9-15V DC supply
Ideal For
- Embedded firmware developers working with AVR and AVR32
- Electronics hobbyists debugging XMEGA projects
- Production engineers programming AVR microcontrollers
- Students learning embedded systems with AVR Studio
- Makers building projects with ATmega or ATtiny MCUs
Buying Tip
Check that your target microcontroller supports JTAG, PDI, or debugWIRE and that your AVR Studio version matches the firmware; the unit ships with AVR Studio 5 firmware but can be updated.
Elecvora expert review
Our verdict
The Waveshare USB AVR JTAGICE XPII is a solid, versatile programmer and debugger that covers a wide range of AVR and AVR32 devices. Its dual PC interfaces and flexible power options make it suitable for both bench and field use, though users should verify firmware compatibility with their AVR Studio version.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Supports a broad range of AVR and AVR32 microcontrollers
- Includes multiple adapter cables for different interfaces
- Can be powered from USB or external DC supply
- Wide target voltage range accommodates various boards
Cons
- USB 1.1 may be slower for large file transfers
- Requires separate AVR Studio installation and setup
- debugWIRE support is for debugging only, not programming
Best for
Engineers and hobbyists developing with AVR and AVR32 microcontrollers who need a reliable debugger/programmer.
Not ideal for
Those working exclusively with ARM or other non-AVR architectures.
Specifications
| Item Type | Programmer, Debugger |
|---|---|
| Operating Voltage (V) | 2.1V-5.5V |
| Regulated Power Supply | 9-15 V DC Power |
| USB | 1.1 |
| Interface | RS232 |
| Shipping Weight | 0.411 kg |
| Shipping Dimensions | 21 × 15 × 5 cm |
What's in the box
- 1 x USB AVR JTAGICE XPII
- 1 x USB Cable
- 1 x RS-232 serial cable
- 1 x Spare 10-pin cable
- 1 x 10-pin (JTAG) to 6-pin (SPI) probe adapter cable
- 1 x 10-pin (JTAG) to 10-pin (SPI) probe adapter cable
- 1 x 10-wire multicolor custom connector cable
Frequently Asked Questions
Which microcontrollers are supported?
What software is required?
Can I power the programmer from the target board?
What is the target voltage range?
Does it support debugWIRE programming?
What cables are included?
Overview
The Waveshare USB AVR JTAGICE XPII is a robust programmer and debugger designed for engineers working with AVR and AVR32 microcontrollers. As a compatible alternative to Atmel's JTAGICE mkII, it provides full on-chip debugging and programming capabilities for devices featuring on-chip debug (OCD) support, including XMEGA series. Whether you are developing firmware, troubleshooting embedded systems, or programming production units, this tool offers a reliable connection between your PC and the target board.
Key Features
- Broad device support: Works with all AVR and AVR32 microcontrollers that include on-chip debug capability, covering XMEGA devices.
- Multiple interfaces: Connects to the target via JTAG, PDI, or debugWIRE, and to the PC via USB 1.1 or RS232.
- Comprehensive debugging: Supports run, single-step, breakpoints, and source-level debugging in assembler and high-level languages.
- Flexible power: Can be powered directly from the USB bus or from an external 9-15V DC regulated supply.
- Wide target voltage: Operates with target boards ranging from 2.1V to 5.5V.
Specifications Explained
Operating voltage (2.1V-5.5V): This is the voltage range of the target microcontroller. The JTAGICE XPII automatically adapts to the target's I/O voltage, ensuring safe and reliable communication without level shifters.
Regulated power supply (9-15V DC): For stand-alone operation or when USB power is insufficient, you can connect an external regulated DC supply in this range. The unit also includes an onboard regulator to power the target if needed.
USB 1.1 and RS232: These are the PC-side interfaces. USB 1.1 is sufficient for programming and debugging tasks, while RS232 offers a legacy connection option for older systems.
JTAG, PDI, debugWIRE: These are the target-side interfaces. JTAG is used for many AVR and AVR32 devices, PDI is common on XMEGA, and debugWIRE is a single-wire debug interface for smaller AVRs (note: debugWIRE is for debugging only, not programming).
Compatibility and Requirements
The JTAGICE XPII is compatible with AVR Studio 4, 5, 6, or higher versions. It ships with firmware for AVR Studio 5 and can be updated to support other versions. A free USB port or RS232 port is required on your PC. The target board must support JTAG, PDI, or debugWIRE interfaces and operate within 2.1V to 5.5V. No additional software drivers are mentioned, but AVR Studio typically includes necessary drivers.
Typical Uses
- Firmware development and debugging for AVR and AVR32 projects
- Programming flash, EEPROM, fuses, and lock bits
- Production programming of AVR microcontrollers
- Educational settings for learning embedded systems
- Hobbyist and professional projects requiring in-circuit debugging
What's in the Box
- 1 x USB AVR JTAGICE XPII unit
- 1 x USB cable
- 1 x RS-232 serial cable
- 1 x Spare 10-pin cable
- 1 x 10-pin (JTAG) to 6-pin (SPI) probe adapter cable
- 1 x 10-pin (JTAG) to 10-pin (SPI) probe adapter cable
- 1 x 10-wire multicolor custom connector cable

Quick specs
- Item Type
- Programmer, Debugger
- Operating Voltage (V)
- 2.1V-5.5V
- Regulated Power Supply
- 9-15 V DC Power
- USB
- 1.1
- Interface
- RS232
- Shipping Weight
- 0.411 kg



















