
1 / 2 · Click to enlarge
At a glance
Made by WAVESHARE, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: usb Type-C connector; model no. / name ESP32-S3-WROOM-1-N8R8, 32-bit LX7 dual-core processor; flash memory 8MB.
Key Highlights
- Wireless connection
- USB: Type-C connector
- Model No. / Name: ESP32-S3-WROOM-1-N8R8, 32-bit LX7 dual-core processor
- Flash Memory: 8MB
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| USB | Type-C connector |
|---|---|
| Model No. / Name | ESP32-S3-WROOM-1-N8R8, 32-bit LX7 dual-core processor |
| Clock Speed | 240 MHz |
| Flash Memory | 8MB |
| Shipping Weight | 0.012 kg |
| Shipping Dimensions | 11 × 7 × 0.1 cm |
Overview
The WaveshareESP32-S3 RGB LCD Driver Board, 32-bit 240MHz LX7 Dual-Core Processor, 8MB PSRAM and Flash, WiFi & Bluetooth Support, Optional for RGB Touch Display Module, made by WAVESHARE, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- USB: Type-C connector (confirm your cable or board uses the same connector)
- Model No. / Name: ESP32-S3-WROOM-1-N8R8, 32-bit LX7 dual-core processor (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Clock Speed: 240 MHz (make sure the rest of your system works at this frequency)
- Flash Memory: 8MB (more memory leaves room for larger programs and buffers)
- Shipping Weight: 0.012 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 11 × 7 × 0.1 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Adopts ESP32-S3-WROOM-1-N8R8 module with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz.
- Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM, 8MB Flash memory.
- Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance.
- Type-C connector, easier to use.
- Onboard 40Pin SPI+RGB and 18Pin SPI LCD screen connector, strong compatibility and expandability.
- Onboard Lithium battery recharge manager ETA6096 and MX1.25 lithium battery header.
- Castellated module allows soldering direct to carrier boards.
- Supports multiple low-power operating states, adjustable balance between communication distance, data rate and power consumption to meet the power requirements of various application scenarios.
Package Includes:
- ESP32-S3-LCD-Driver-Board x1
- 20pin male pinheader (yellow) x1
Quick specs
- USB
- Type-C connector
- Model No. / Name
- ESP32-S3-WROOM-1-N8R8, 32-bit LX7 dual-core processor
- Clock Speed
- 240 MHz
- Flash Memory
- 8MB
- Shipping Weight
- 0.012 kg
- Shipping Dimensions
- 11 × 7 × 0.1 cm



















