Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

USB Blaster V2 cable for programming Intel (Altera) FPGA and CPLD devices via JTAG, AS, or PS modes. Based on FT245+CPLD architecture, it works with Quartus II for development and debugging.

Key Highlights

  • USB-to-JTAG programming for Altera FPGA/CPLD
  • FT245 USB bridge plus CPLD logic
  • Supports JTAG, AS, and PS modes
  • Works with Quartus II and Nios II
  • Standard 10-pin JTAG connector
  • USB 2.0 interface for PC connectivity

Ideal For

  • FPGA developers working with Altera devices
  • Students learning digital design with FPGA boards
  • Hobbyists prototyping with CPLDs
  • Engineers testing and debugging FPGA configurations
  • Makers using Quartus II for development

Buying Tip

Check that your target board has a standard 10-pin JTAG header and that your device is supported by Quartus II before purchasing.

Elecvora expert review

Our verdict

The Waveshare USB Blaster V2 offers a practical, low-cost solution for programming and debugging Altera FPGA and CPLD devices. Its FT245+CPLD design ensures compatibility with Quartus II, making it a reliable tool for development and education.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Supports multiple programming modes (JTAG, AS, PS)
  • Works with Quartus II and Nios II
  • Standard 10-pin JTAG connector for broad compatibility
  • Compact and lightweight design
  • Cost-effective compared to official programmers

Cons

  • Not an official Intel programmer, so performance may vary
  • Requires target board with 10-pin JTAG header
  • No additional drivers or software included

Best for

FPGA developers and students using Altera devices

Not ideal for

Those needing official Intel programmer performance or advanced debugging features

Specifications

Shipping Weight0.110 kg
Shipping Dimensions8 × 6 × 2 cm

What's in the box

  • 1 x Waveshare USB Blaster V2 Download Cable
  • 1 x USB Cable
  • 1 x 10-pin cable

Frequently Asked Questions

What devices is this cable compatible with?
It is compatible with Intel (Altera) FPGA and CPLD devices that support JTAG, Active Serial (AS), or Passive Serial (PS) programming, including MAX, Cyclone, Stratix, and EPC/EPCS families.
Does it work with Quartus II?
Yes, the cable works with Quartus II and Nios II IDE/EDS. It appears as a USB Blaster in the hardware setup.
What is the voltage support?
Voltage support depends on the target board's VCCIO, typically ranging from 1.2V to 5V via buffering.
What is included in the package?
The package includes the USB Blaster V2 cable, a USB cable, and a 10-pin cable.
Do I need to install drivers?
Quartus II includes the necessary drivers for the USB Blaster. No separate drivers are mentioned.
Can I use this for debugging?
Yes, it supports basic debugging functions in supported environments, such as the SignalTap logic analyzer in Quartus II.

Overview

The Waveshare USB Blaster V2 is a download cable designed for programming and debugging Intel (Altera) FPGA and CPLD devices. It connects to your computer via USB 2.0 and to the target board through a standard 10-pin JTAG header. Inside, an FT245-series USB bridge works with CPLD logic to implement the USB Blaster protocol, providing a high-speed, cost-effective alternative to official programmers.

Key Features

  • USB-to-JTAG programming for Altera FPGA and CPLD devices
  • FT245 + CPLD architecture for USB Blaster compatibility
  • Multiple programming modes: JTAG, Active Serial (AS), and Passive Serial (PS)
  • Software support: Quartus II and Nios II IDE/EDS
  • Standard 10-pin JTAG connector for broad board compatibility
  • USB 2.0 interface for reliable PC connectivity

Specifications Explained

The cable uses an FTDI-class USB bridge (FT245) combined with CPLD logic to handle the USB Blaster protocol. This architecture supports the three main programming modes: JTAG for boundary-scan testing and configuration, Active Serial (AS) for configuring devices with serial configuration memory, and Passive Serial (PS) for passive configuration. The 10-pin JTAG header is the standard interface found on many Altera development boards. Voltage support depends on the target board's VCCIO, typically ranging from 1.2V to 5V via buffering, so it adapts to different logic levels. The cable is compatible with Quartus II and Nios II tools, allowing you to program and debug supported devices such as MAX, Cyclone, Stratix, and EPC/EPCS families.

Compatibility and Requirements

This cable is intended for use with Intel (Altera) FPGA and CPLD devices that support JTAG, AS, or PS programming. It requires a host PC with a USB port and compatible software, such as Quartus II or Nios II. The target board must have a standard 10-pin JTAG header. No additional drivers are mentioned; the cable works with the software's built-in USB Blaster support. Ensure your target board's VCCIO is within the supported range (typically 1.2V–5V) for proper operation.

Typical Uses

  • Programming and configuring Altera FPGA and CPLD devices
  • Debugging designs in Quartus II
  • Educational projects and FPGA learning
  • Development and testing of custom boards
  • Updating configuration memory (EPC/EPCS) via AS mode

What's in the Box

  • 1 x Waveshare USB Blaster V2 Download Cable
  • 1 x USB Cable
  • 1 x 10-pin cable

Quick specs

Shipping Weight
0.110 kg
Shipping Dimensions
8 × 6 × 2 cm
See all specifications