Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by WeAct Studio, this pic programmers and debuggers is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name STLink-DAPLink; microcontroller STM32F103C8T6; interface SWD, SWO, USB to UART.

Key Highlights

  • Small and easy to carry or mount
  • Model No. / Name: STLink-DAPLink
  • Microcontroller: STM32F103C8T6
  • Interface: SWD, SWO, USB to UART

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameSTLink-DAPLink
MicrocontrollerSTM32F103C8T6
InterfaceSWD, SWO, USB to UART
ConnectivityUSB connection to host
Supported SoftwareKeil, IAR, STM32CubeIDE
FeaturesFirmware update, debugging support (SWD/SWO), USB to UART conversion
Shipping Weight0.015 kg
Shipping Dimensions10 × 6 × 2 cm

Overview

The WeAct Studio STLink-STM32 Mini Debugger DAPLink STLink SWD SWO USB To Uart Module, made by WeAct Studio, is listed in our pic programmers and debuggers range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: STLink-DAPLink
  • Microcontroller: STM32F103C8T6 (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Interface: SWD, SWO, USB to UART (confirm your cable or board uses the same connector)
  • Connectivity: USB connection to host
  • Supported Software: Keil, IAR, STM32CubeIDE (confirm your cable or board uses the same connector)
  • Shipping Weight: 0.015 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 10 × 6 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

STLINK  is a peripheral based on STM32F103CBT6 microcontroller, which is used for debugging and programming with STM32 series microcontrollers. It supports a SWD debugging interface and connects to a computer via USB. STLINK can be integrated with many debugging environments, such as Keil, IAR, STM32CubeIDE, etc. It also supports OpenOCD and can use GDB for command-line debugging. STLINK has good reliability and stability. It also has many useful features, such as debugging combined with firmware upgrade capabilities. In addition, STLINK supports password protection, read/write protection, and hardware interface locking. All in all, STLINK is a powerful debugging and programming tool for STM32 that makes the development of embedded applications much simpler and easier. Note: Actual product may vary in terms of version.

Features:

  1. It supports a SWD debugging interface and connects to a computer via USB. STLINK  can be integrated with many debugging environments, such as Keil, IAR, STM32CubeIDE, etc.

Package Includes:

1 x WeAct Studio STLink-STM32 Mini Debugger DAPLink STLink SWD SWO USB To Uart Module

Quick specs

Model No. / Name
STLink-DAPLink
Microcontroller
STM32F103C8T6
Interface
SWD, SWO, USB to UART
Connectivity
USB connection to host
Supported Software
Keil, IAR, STM32CubeIDE
Shipping Weight
0.015 kg
See all specifications