Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A white 30mm LED pilot lamp rated AC/DC 12V that draws 20mA or less. It fits a 28mm mounting hole with IP65 front protection, making it a neat status light for panels and equipment.

Key Highlights

  • White LED pilot lamp rated for AC/DC 12V operation
  • Low current draw of 20mA or less
  • 30mm size with 36mm head and 28mm mounting hole
  • IP65 protection standard for the front face
  • Durable plastic body with screw fixing for panels
  • Compact 54mm length and only 20g in weight

Ideal For

  • Control panel builders needing a 12V status light
  • Electrical technicians monitoring phase or power lines
  • Telecommunication equipment installers
  • Makers and DIY electronics enthusiasts
  • Equipment manufacturers adding panel indicators

Buying Tip

Measure your panel cut-out first: this lamp needs a 28mm mounting hole and about 54mm of clearance behind the panel.

Elecvora expert review

Our verdict

A straightforward, low-power white panel indicator that is easy to fit thanks to its standard 28mm mounting hole and screw fixing. It is a sensible choice for 12V status indication where a compact, protected lamp is needed.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Low current draw of 20mA or less
  • IP65 front protection against dust and splashes
  • Simple screw fixing for panel mounting
  • Compact and lightweight at about 20g
  • Works on AC or DC 12V supplies

Cons

  • Wiring and connectors are not included
  • Only suitable for 12V circuits, not other voltages
  • White light only, so colour-coded status needs other models

Best for

12V control panels and equipment needing a clear white status indicator

Not ideal for

Higher-voltage circuits or applications requiring multi-colour signalling from one lamp

Specifications

ColorWhite
Voltage Rating (V)12
Size (mm)30
Model No. / NameAD16-30DS
Operating Voltage (V)AC/DC 12V
Current consumption≤20
Body MaterialPlastic
Head Diameter (mm)36
Mounting Hole Diameter (mm)28
Length (mm)54
Weight (g)20
Protection StandardIP65
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x White AC/DC 12V 30mm AD16-30DS LED Power Pilot Signal Indicator Lamp

Frequently Asked Questions

What voltage does this indicator lamp use?
It is rated for AC/DC 12V and draws 20mA or less. Use it only with a supply that matches this rating.
What size hole do I need for mounting?
The lamp requires a 28mm mounting hole. The head diameter is 36mm and the overall length is 54mm, so allow clearance behind the panel.
Is the lamp waterproof?
It carries an IP65 protection standard, which covers the front against dust and water splashes. It is not intended for full submersion.
What is included in the package?
The package contains one white AC/DC 12V 30mm AD16-30DS LED pilot signal indicator lamp. Wiring and connectors are not included.
Can I use it outdoors?
The IP65 front protection makes it suitable for dusty or splash-prone locations, but the installation should still suit the panel and enclosure it is fitted to.
How do I care for the lamp?
Wipe the front lens with a soft, damp cloth when needed and avoid abrasive cleaners. Check the fixing remains tight on the panel.

Overview

The AD16-30DS is a white LED power pilot signal lamp for showing the status of a circuit, phase or power line on a panel or chassis. Instead of a conventional filament bulb, it uses an LED light source that consumes little current and gives a clean, even indication. With a 30mm size, a 36mm head and a 28mm mounting hole, it fits neatly into control dashboards, equipment fronts and signal monitoring points.

The lamp is rated for AC/DC 12V and draws 20mA or less, so it is easy to add to low-voltage circuits without a heavy load. The plastic body and screw fixing hold it securely in place, and the IP65 protection standard means the front is protected against dust and water splashes.

Key Features

  • LED light source: low power consumption and a long-lasting, steady white indication.
  • AC/DC 12V rating: works with either direct or alternating 12V supplies within the stated rating.
  • 30mm panel size: a 36mm head and 28mm mounting hole suit standard panel cut-outs.
  • IP65 protection: front-face protection against dust and water splashes.
  • Screw fixing: locks onto the dashboard or panel for a secure fit.
  • Compact build: 54mm overall length and around 20g weight.

Specifications Explained

Voltage rating: the lamp is specified for AC/DC 12V. Confirm your supply matches this before wiring it in. Current consumption: at 20mA or less, the lamp places only a small load on the circuit. Size and fit: the 30mm size refers to the lamp series, while the 36mm head and 28mm mounting hole tell you the panel opening and clearance needed. The 54mm length covers the body behind the panel. IP65: this protection standard applies to the front of the indicator, so it is suitable where dust or occasional splashes are present. Body material: plastic keeps the unit light and provides shock resistance.

Compatibility and Requirements

Use the AD16-30DS only with a supply that matches its AC/DC 12V rating. The panel needs a 28mm mounting hole, and you should allow space behind the panel for the 54mm body length. Wiring is not included, so suitable leads and connectors must be supplied separately. The lamp is a panel indicator only and is not a switch or a controller.

Typical Uses

  • Power-on and phase indication on control panels
  • Status lights on electrical apparatus and telecommunication equipment
  • Signal monitoring on device chassis and dashboards
  • Warning or accident signal indication in circuits
  • DIY electronics and equipment builds needing a clear white status light

What's in the Box

1 x White AC/DC 12V 30mm AD16-30DS LED Power Pilot Signal Indicator Lamp.

Quick specs

Color
White
Voltage Rating (V)
12
Size (mm)
30
Model No. / Name
AD16-30DS
Operating Voltage (V)
AC/DC 12V
Current consumption
≤20
See all specifications