
At a glance
Made by Winsen, this gas sensors is a good fit for makers, students and electronics hobbyists. Main specs: item type Gas Sensor; model no. / name ZE21-CS; detection gas Battery leakage integrated gas. Check that your power source supplies 5~10V DC before connecting it.
Key Highlights
- Item Type: Gas Sensor
- Model No. / Name: ZE21-CS
- Detection Gas: Battery leakage integrated gas
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Gas Sensor |
|---|---|
| Model No. / Name | ZE21-CS |
| Detection Gas | Battery leakage integrated gas |
| Interfering gases | Alcohol, etc. |
| Output | UART output (3.3V TTL) |
| Operating Voltage | 5~10V DC |
| Preheat time | 40 seconds |
| Response Time(s) | ≤5 seconds (T90) |
| Recovery Time | ≤60 seconds |
| Detecting Range | 0~1000ppm |
| Resolution | 1ppm |
| Operating Temperature (°C) | -20℃~65℃ |
| Operating humidity | 15%RH-90%RH (No condensation) |
| Storage Temperature (°C) | -30℃~65℃ |
| Life Cycle | 5 years (in the air) |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 7 × 4 × 2 cm |
Overview
The Winsen Battery Leak Detection Module ZE21-CS, made by Winsen, is listed in our gas sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Gas Sensor
- Model No. / Name: ZE21-CS
- Detection Gas: Battery leakage integrated gas (note the battery type so you can order spares or the right charger)
- Interfering gases: Alcohol, etc.
- Output: UART output (3.3V TTL)
- Operating Voltage: 5~10V DC (match this to your power supply; too high a voltage can damage the part)
- Preheat time: 40 seconds
- Response Time(s): ≤5 seconds (T90)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Application:
Detection of battery leakage gas CO, H2, etc. in electric vehicle EVs battery boxes, new energy storage and other occasions.
Features:
- High sensitivity
- High resolution
- Low power consumption
- Long life
- Uart output
Package Includes:
1 x Winsen Battery Leak Detection Module ZE21-CSQuick specs
- Item Type
- Gas Sensor
- Model No. / Name
- ZE21-CS
- Detection Gas
- Battery leakage integrated gas
- Interfering gases
- Alcohol, etc.
- Output
- UART output (3.3V TTL)
- Operating Voltage
- 5~10V DC


















