Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Winsen FR06 is a MEMS thermal micro flow sensor for clean, dry gases, offering a linear 0.5–4.5V output and ±(2+0.5FS)% accuracy. Its low pressure loss and high sensitivity make it ideal for precise pipeline flow monitoring.

Key Highlights

  • MEMS thermal sensing for accurate gas flow measurement
  • Wide 5–14 VDC operating voltage range
  • Linear 0.5V–4.5V analog output (optional)
  • Accuracy of ±(2+0.5FS)% for reliable readings
  • Low pressure loss design preserves system efficiency
  • High sensitivity and very low pickup flow

Ideal For

  • Engineers designing gas flow measurement systems
  • Makers and hobbyists working with sensor integration
  • Laboratory technicians monitoring gas flows
  • Product developers needing a compact flow sensor
  • HVAC and environmental monitoring professionals

Buying Tip

Ensure your gas supply is clean and dry, and plan for straight pipe sections at the inlet and outlet to achieve the specified accuracy.

Elecvora expert review

Our verdict

The Winsen FR06 is a solid, compact flow sensor for clean gas applications where analog output and low pressure loss are important. It offers good accuracy and flexibility, though it requires careful installation and gas conditioning.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • High sensitivity and low pickup flow
  • Linear 0.5–4.5V output simplifies integration
  • Low pressure loss design
  • Modular and customizable

Cons

  • Requires clean, dry, non-corrosive gas
  • Needs straight pipe sections for specified accuracy
  • Limited to 0–50°C operating temperature

Best for

Engineers and developers needing a compact analog flow sensor for clean gases.

Not ideal for

Applications with dirty, wet, or corrosive gases, or high-temperature environments.

Specifications

Operating Voltage (VDC)5 to 14
Model No. / NameFR06
Scale10/20 Full SLM
Drift diameterDN6
Output Mode Linearity0.5V~4.5V(Optional)
Output Impedance200Ω
Working Current (mA)≤10mA
Accuracy±(2+0.5FS)%
Operating Temperature (°C)0℃~50℃
Shipping Weight0.048 kg
Shipping Dimensions9 × 6 × 3 cm

What's in the box

  • 1 x Winsen FR06 Micro Flow Sensor

Frequently Asked Questions

What type of gas can I use with the FR06 sensor?
The sensor is designed for clean, dry, non-corrosive gases. Dust, liquid, or oil contamination should be avoided, and a filter may be installed if necessary.
What is the output signal of the FR06?
It provides a linear analog voltage output from 0.5V to 4.5V (optional), with an output impedance of 200Ω.
What is the operating voltage range?
The sensor operates from 5 to 14 VDC and draws a working current of ≤10 mA.
Does the sensor come with calibration?
Yes, it is calibrated by default under standard conditions with air. Custom calibration is available on request.
What is included in the package?
The package includes one Winsen FR06 Micro Flow Sensor.
How should I install the sensor for best accuracy?
Install straight pipe sections of at least 5 times the nominal diameter at the inlet and 3 times at the outlet, and ensure the gas is clean and dry.

Overview

The Winsen FR06 Micro Flow Sensor is a compact, modular device designed to measure the flow of gas through a pipeline. It employs the MEMS thermal principle to detect flow, delivering a linear analog output that is easy to read with common microcontrollers and data loggers. The sensor operates from a 5 to 14 VDC supply and draws ≤10 mA, making it suitable for low-power installations. With a DN6 drift diameter and a scale of 10/20 Full SLM, the FR06 is intended for applications where small to medium gas flows need to be monitored with good repeatability.

Key Features

  • MEMS thermal sensing: Provides high sensitivity and very low pickup flow detection.
  • Linear output: 0.5V–4.5V analog output (optional) with 200Ω output impedance.
  • Low pressure loss: Minimizes impact on the gas circuit.
  • Modular design: Facilitates integration into custom products.
  • Wide voltage range: Operates from 5 to 14 VDC.
  • High measurement repeatability: Ensures consistent results over time.

Specifications Explained

Operating Voltage (5–14 VDC): The sensor accepts a broad range of supply voltages, giving flexibility in power source selection. Output (0.5V–4.5V): This analog span is compatible with many ADCs and microcontroller inputs; the 200Ω output impedance means it can drive moderate loads without significant error. Accuracy ±(2+0.5FS)%: The error is a combination of a percentage of reading plus a percentage of full scale, typical for thermal flow sensors. Scale 10/20 Full SLM: Indicates the flow range the sensor is calibrated for. DN6 drift diameter: The internal bore is 6 mm, matching common tubing sizes. Operating Temperature (0–50°C): Suitable for indoor and controlled environments. Working Current ≤10 mA: Low power consumption.

Compatibility and Requirements

The FR06 is designed for use with clean, dry, non-corrosive gases. The medium must be purified to avoid dust, liquid, or oil contamination; if necessary, install a filtering device in the gas circuit. The pressure of the medium should not exceed 1.2 times the maximum working pressure of the product. To maintain measurement accuracy, install a straight pipe section of at least 5 times the nominal diameter at the inlet and at least 3 times the nominal diameter at the outlet. The sensor is calibrated by default under standard conditions with air; special calibration is available on request.

Typical Uses

  • Gas flow monitoring in industrial and laboratory setups
  • Medical equipment requiring precise gas delivery
  • HVAC and environmental monitoring systems
  • Fuel cell and gas analysis instruments
  • Custom product development with flow measurement needs

What's in the Box

1 x Winsen FR06 Micro Flow Sensor.

Quick specs

Operating Voltage (VDC)
5 to 14
Model No. / Name
FR06
Scale
10/20 Full SLM
Drift diameter
DN6
Output Mode Linearity
0.5V~4.5V(Optional)
Output Impedance
200Ω
See all specifications