Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Winsen, this gas sensors is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name MH-410D; detection gas CO2; operating voltage 3.6~5V DC. Check that your power source supplies 3.6~5V DC before connecting it.

Key Highlights

  • Model No. / Name: MH-410D
  • Detection Gas: CO2
  • Operating Voltage: 3.6~5V DC

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameMH-410D
Detection GasCO2
Operating Voltage3.6~5V DC
Avg. Current Consumption<85 mA
Interface Level3.0V
Signal OutputUART 0.4~2V
Warm-Up Time3 min
Response Time(s)T90<30s
Operating Temperature (°C)-20°C ~60°C
Operating humidity0~95%RH(no condensation)
Life Cycle>5 years
Size (mm)Φ20x21.4mm
Weight (g)35g
Shipping Weight0.034 kg
Shipping Dimensions11 × 8 × 5 cm

Overview

The Winsen MH-410D NDIR CO2 Gas Sensor, made by Winsen, is listed in our gas sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: MH-410D
  • Detection Gas: CO2
  • Operating Voltage: 3.6~5V DC (match this to your power supply; too high a voltage can damage the part)
  • Avg. Current Consumption: <85 mA (your supply must deliver at least this much current)
  • Interface Level: 3.0V (confirm your cable or board uses the same connector)
  • Signal Output: UART 0.4~2V
  • Warm-Up Time: 3 min
  • Response Time(s): T90<30s

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

MH-410D NDIR Co2 Sensor is a miniature universal intelligent sensor, which adopts NDIR theory to detect concentration of CO2 in air and has good selectivity, stable performance, long life, also is independent of Oxygen. The inside temperature sensor could be used for temperature compensation. This miniature infrared gas sensor is developed by the tight integration of mature infrared absorbing gas detection technology, micro machine workout and superior circuit design. NDIR CO2 sensors monitor and detect for the presence of carbon dioxide based on the absorption of infrared light at a specific wavelength. An NDIR sensor comprises an infrared source, a light tube, a bandpass filter, and a detector. The target gas is determined through the filter wavelength choice. Why we need it. Carbon dioxide monitors are a good way to monitor constantly busy rooms and can help in increasing air ventilation to reduce the impacts of COVID-19. It is also vital to monitor CO2 levels to ensure compliance to government notice BB101. Applications:  Widely used for HVAC refrigeration, air monitoring indoor, industrial-process control and safety protection, agriculture and animal husbandry


Features: 

  1. High sensitivity, high resolution, low power consumption
  2. Output method: UART, analog voltage signal
  3. Fast response time
  4. Temperature compensation, excellent linear output
  5. Excellent stability
  6. Long lifespan
  7. Anti-poisons, anti-vapor interference
  8. Detecting Range: 0-1% VOL

Package Includes: 

1 x Winsen MH-410D NDIR Co2 Sensor

Quick specs

Model No. / Name
MH-410D
Detection Gas
CO2
Operating Voltage
3.6~5V DC
Avg. Current Consumption
&lt;85 mA
Interface Level
3.0V
Signal Output
UART 0.4~2V
See all specifications