Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Winsen, this gas sensors is a good fit for makers, students and electronics hobbyists. Main specs: item type Gas Sensor; sensor type Semiconductor; model no. / name MQ-2. Check that your power source supplies ≤24V DC before connecting it.

Key Highlights

  • Item Type: Gas Sensor
  • Sensor Type: Semiconductor
  • Model No. / Name: MQ-2

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeGas Sensor
Sensor TypeSemiconductor
Model No. / NameMQ-2
Standard EncapsulationBakelite, Metal cap
Target GasesFlammable gas, smoke gas sensor
Detecting Range300~10000ppm(flammable gas)
Loop Voltage(Vc)≤24V DC
Heater Voltage5.0V±0.1V AC or DC
Temperature and Humidity20+/-2C, 55%+/-5%RH
Output Voltage2.5V~4.0V(in 2000ppmC3H8)
Load ResistanceAdjustable
Heater Resistance29Ω±3Ω(room tem.)
Sensitivity (dBm)Ro(in air)/Rs(2000ppm C3H8)>5
Length (mm)24
Diameter (mm)19
Weight (g)8
Shipping Weight0.02 kg
Shipping Dimensions2 × 2 × 2 cm

Overview

The Winsen MQ-2 Smoke Gas Sensor Module, made by Winsen, is listed in our gas sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Gas Sensor
  • Sensor Type: Semiconductor
  • Model No. / Name: MQ-2
  • Standard Encapsulation: Bakelite, Metal cap
  • Target Gases: Flammable gas, smoke gas sensor
  • Detecting Range: 300~10000ppm(flammable gas) (quoted range is usually line-of-sight; walls and interference shorten it)
  • Loop Voltage(Vc): ≤24V DC (match this to your power supply; too high a voltage can damage the part)
  • Heater Voltage: 5.0V±0.1V AC or DC (match this to your power supply; too high a voltage can damage the part)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Winsen MQ-2 Smoke Sensor is an original and brand new smoke and propane gas sensor. With a long lifespan and low price, for domestic gas leakage and flammable gas alarm use.

The sensitive material of the MQ-2 gas sensor is SnO2, which with lower conductivity in clean air. When the target flammable gas exists, the sensor’s conductivity gets higher along with the gas concentration rising. Users can convert the change of conductivity to correspond output signal of gas concentration through a simple circuit.

MQ-2 gas sensor has a high sensitivity to propane and smoke, also can detect natural gas and other flammable steam well. It is at low cost and suitable for different applications of detecting kinds of flammable gases.

Applications :

It is widely used in domestic gas leakage alarms, industrial flammable gas alarms, and portable gas detectors.


Features:

  1. Responsive to a wide range of gases
  2. Compatible with 5V
  3. Cost-efficient

Package Includes:

1 x Winsen MQ-2- Smoke Sensor

Quick specs

Item Type
Gas Sensor
Sensor Type
Semiconductor
Model No. / Name
MQ-2
Standard Encapsulation
Bakelite, Metal cap
Target Gases
Flammable gas, smoke gas sensor
Detecting Range
300~10000ppm(flammable gas)
See all specifications