Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Winsen, this gas sensors is a good fit for makers, students and electronics hobbyists. Main specs: item type Gas Sensor; model no. / name WSP2110; sensor Semiconductor flat surfaced sensor. Check that your power source supplies ≤24V DC before connecting it.

Key Highlights

  • Item Type: Gas Sensor
  • Model No. / Name: WSP2110
  • Sensor: Semiconductor flat surfaced sensor

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeGas Sensor
Model No. / NameWSP2110
SensorSemiconductor flat surfaced sensor
Standard EncapsulationMetal Cap
Detection Gastoluene, methanal, benzene, alcohol, acetone &etc.
Detecting Range1~50ppm
Loop Voltage(Vc)≤24V DC
Heater Voltage5.0V±0.1V AC or DC VH
Load ResistanceAdjustable RL
Heater Resistance90Ω±10Ω(Room Tem.)
SensitivityRs(in air)/Rs(in 10ppm toluene)≥3
Concentration Slope≤0.6(R50ppm/R5ppmtoluene)
Temperature and Humidity20℃±2℃;55%±5%RH
Standard test circuitVC:5.0V±0.1V; VH :5.0V±0.1V
Preheat timeMore than 120 hours
Shipping Weight0.01 kg
Shipping Dimensions6 × 4 × 2 cm

Overview

The Winsen WSP2110-acetone sensor, made by Winsen, is listed in our gas sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Gas Sensor
  • Model No. / Name: WSP2110
  • Sensor: Semiconductor flat surfaced sensor
  • Standard Encapsulation: Metal Cap
  • Detection Gas: toluene, methanal, benzene, alcohol, acetone &etc. (your supply must deliver at least this much current)
  • Detecting Range: 1~50ppm (quoted range is usually line-of-sight; walls and interference shorten it)
  • Loop Voltage(Vc): ≤24V DC (match this to your power supply; too high a voltage can damage the part)
  • Heater Voltage: 5.0V±0.1V AC or DC VH (match this to your power supply; too high a voltage can damage the part)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Winsen Electronics, research and produce air quality monitoring gas sensor for home and office air cleaners, and fresh air system. WSP2110 VOC gas sensor adopts multilayer thick film manufacturing technology. The heater and metal oxide semiconductor material on the ceramic substrate of subminiature Al2O3 is fetched out by an electrode down-lead, encapsulated in a metal socket and cap. The conductivity of the sensor is affected by the concentration of the target gas. The higher the concentration is, the higher conductivity of the sensor gets. Users can adopt a simple circuit to convert the variation of conductivity into an output signal corresponding to the gas concentration. Applications: It is used in automatic exhaust devices, and air cleaners on domestic occasions for harmful gas detection.

Features:

High sensitivity to toluene, benzene, formaldehyde, and other organic gases Small component size 5V constant voltage, low power consumption Fast response and recovery characteristics Simple drive circuit Excellent stability and long service life
 

Package Includes:

1 x Winsen WSP2110-acetone sensor

Quick specs

Item Type
Gas Sensor
Model No. / Name
WSP2110
Sensor
Semiconductor flat surfaced sensor
Standard Encapsulation
Metal Cap
Detection Gas
toluene, methanal, benzene, alcohol, acetone &etc.
Detecting Range
1~50ppm
See all specifications