Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by WIZnet, this multi-brand raspberry pi add on boards (hats) is a good fit for makers, students and electronics hobbyists. Main specs: item type Other Board; compatibility Pi Pico; board type Dev. Board. Check that your power source supplies 5VDC before connecting it.

Key Highlights

  • Item Type: Other Board
  • Compatibility: Pi Pico
  • Board Type: Dev. Board

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeOther Board
CompatibilityPi Pico
Board TypeDev. Board
Power Supply Voltage (V)5VDC
Operating Voltage (VDC)3.3
GPIO26 Pins
Flash Memory2MB.
SRAM264 KB
Shipping Weight0.018 kg
Shipping Dimensions9 × 3 × 3 cm

Overview

The WIZnet W5100S-EVB-Pico, made by WIZnet, is listed in our multi-brand raspberry pi add on boards (hats) range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Other Board
  • Compatibility: Pi Pico
  • Board Type: Dev. Board
  • Power Supply Voltage (V): 5VDC (match this to your power supply; too high a voltage can damage the part)
  • Operating Voltage (VDC): 3.3 (match this to your power supply; too high a voltage can damage the part)
  • GPIO: 26 Pins
  • Flash Memory: 2MB. (more memory leaves room for larger programs and buffers)
  • SRAM: 264 KB

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

W5100S-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 and entirely hardwired TCP/IP controller W5100S – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5100S. WIZnet W5100S-EVB-Pico Evaluation Board is a compact development platform based on the Raspberry Pi RP2040 Microcontroller. The 133MHz RP2040 MCU has a dual Arm® Cortex®-M0+ core delivering high performance, with various low-power modes to support extended-duration operation on battery power. The RP2040 also features a large on-chip memory, symmetric dual-core processor complex, deterministic bus fabric, and a rich peripheral set augmented with the RPi Programmable I/O (PIO) subsystem. WIZnet W5100S-EVB-Pico Note: Product Images are shown for illustrative purposes only and may differ from the actual product.

Features:

  1. RP2040 microcontroller with 2MByte Flash
  2. Dual-core cortex M0+ at up to 133MHz
  3. 264kByte multi-bank high-performance SRAM
  4. External Quad-SPI Flash with eXecute In Place (XIP)
  5. High-performance full-crossbar bus fabric
  6. 30 multi-function General Purpose IO (4 can be used for ADC)
  7. 1.8-3.3V IO Voltage (NOTE. Pico IO voltage is fixed at 3.3V)
  8. 12-bit 500ksps Analogue to Digital Converter (ADC)
  9. Various digital peripherals
  10. 2 × UART, 2 × I2C, 2 × SPI, 16 × PWM channels
  11. 1 × Timer with 4 alarms, 1 × Real Time Counter
  12. 2 × Programmable IO (PIO) blocks, 8 state machines total
  13. Flexible, user-programmable high-speed IO
  14. Can emulate interfaces such as SD Card and VGA
  15. Includes W5100S
  16. Supports Hardwired Internet Protocols: TCP, UDP, WOL over UDP, ICMP, IGMPv1/v2, IPv4, ARP, PPPoE
  17. Supports 4 Independent Hardware SOCKETs simultaneously
  18. Internal 16 Kbytes Memory for TX/ RX Buffers
  19. SPI Interface
  20. Micro-USB B port for power and data (and for reprogramming the Flash)
  21. 40 pin 21×51 ‘DIP’ style 1mm thick PCB with 0.1″ through-hole pins also with edge castellations
  22. 3-pin ARM Serial Wire Debug (SWD) port
  23. 10 / 100 Ethernet PHY embedded
  24. Supports Auto-Negotiation
  25. Full / Half Duplex
  26. 10 / 100 Based
  27. Built-in RJ45(RB1-125BAG1A)
  28. Built-in LDO (LM8805SF5-33V)

Package Includes:

1 x WIZnet W5100S-EVB-Pico

Quick specs

Item Type
Other Board
Compatibility
Pi Pico
Board Type
Dev. Board
Power Supply Voltage (V)
5VDC
Operating Voltage (VDC)
3.3
GPIO
26 Pins
See all specifications