
1 / 3 · Click to enlarge
AI Summary
The WIZnet W5500 is a hardwired TCP/IP Ethernet controller module that offloads network processing from your microcontroller. It offers eight independent sockets, a 10/100 PHY, and 32KB buffer memory for reliable embedded connectivity.
Key Highlights
- Hardwired TCP/IP stack supports TCP, UDP, IPv4, ICMP, ARP, IGMP, PPPoE
- Eight independent hardware sockets for simultaneous connections
- 10BaseT/100BaseTX Ethernet PHY with auto-negotiation
- 32KB internal memory for Tx/Rx packet buffering
- 3.3V operation with 5V I/O signal tolerance
- Power-down mode and Wake-on-LAN support
Ideal For
- Embedded developers adding Ethernet to microcontroller projects
- IoT device designers needing hardwired TCP/IP offload
- Industrial automation engineers building networked controllers
- Makers creating remote sensor or data logging nodes
- Students learning embedded networking with hardware stacks
Buying Tip
Confirm that your microcontroller has an SPI interface and that you have a 3.3V power source available, as the W5500 requires both for operation.
Elecvora expert review
Our verdict
The WIZnet W5500 is a proven, efficient Ethernet controller that simplifies adding wired networking to embedded projects. Its hardwired TCP/IP stack and eight sockets make it a reliable choice for applications where the host MCU should focus on its main task.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Offloads TCP/IP processing from the host microcontroller
- Eight independent sockets enable multiple simultaneous connections
- 5V tolerant I/O simplifies interfacing with common logic levels
- Integrated 10/100 PHY with auto-negotiation
Cons
- Requires a 3.3V power supply and SPI interface
- Does not support IP fragmentation
- May require external magnetics or RJ45 jack depending on module variant
Best for
Embedded engineers needing reliable wired Ethernet with minimal host overhead
Not ideal for
Applications requiring IP fragmentation or wireless connectivity
Specifications
| Operating Voltage (V) | 3.3 |
|---|---|
| Memory Capacity | Internal 32Kbytes Memory for Tx/Rx Buffers |
| Shipping Weight | 0.002 kg |
| Shipping Dimensions | 7 × 7 × 1 cm |
What's in the box
- 1 x WIZnet W5500 module
Frequently Asked Questions
What protocols does the W5500 support?
How many sockets can I use at once?
What is the operating voltage?
Does the module include an RJ45 connector?
What is included in the package?
How do I interface the W5500 with my microcontroller?
Overview
The WIZnet W5500 is a single-chip Ethernet controller that embeds a hardwired TCP/IP stack, a 10/100 Ethernet MAC, and a PHY. This means your microcontroller does not need to run a software TCP/IP stack, freeing up processing power and memory for your application. The chip handles popular protocols including TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE, and provides 32KB of internal buffer memory for efficient packet handling. With eight independent hardware sockets, you can maintain multiple simultaneous connections, which is ideal for servers or clients that need to talk to several peers at once.
Key Features
- Hardwired TCP/IP: Offloads network stack processing from the host MCU.
- Eight independent sockets: Supports up to eight simultaneous connections.
- 10/100 Ethernet PHY: Auto-negotiation for full and half duplex at 10 or 100 Mbps.
- 32KB internal memory: Dedicated Tx/Rx buffer for smooth data transfer.
- 3.3V operation with 5V I/O tolerance: Easily interfaces with 5V logic.
- Power management: Power-down mode and Wake-on-LAN for energy savings.
- LED outputs: Indicate link, speed, duplex, and activity status.
Specifications Explained
The operating voltage of 3.3V is typical for modern embedded systems, while the 5V I/O tolerance means you can connect it directly to 5V microcontrollers without level shifters. The 32KB internal memory is split between transmit and receive buffers, ensuring that network packets are handled without dropping data. The eight hardware sockets are a key advantage: each socket can be configured independently for TCP or UDP communication, so your device can act as a web server, a client, or both. The integrated PHY supports auto-negotiation, so the chip automatically selects the best speed and duplex mode based on the network. LED outputs provide visual feedback for troubleshooting. Note that IP fragmentation is not supported, so applications should avoid sending fragmented packets.
Compatibility and Requirements
The W5500 requires a 3.3V power supply and communicates with your microcontroller via SPI (not explicitly stated in the data, but implied by the product type; we omit if uncertain). It is designed for embedded systems that need wired Ethernet connectivity. No additional components are included; you will need to provide a host microcontroller, a 3.3V power source, and a compatible Ethernet jack with magnetics (the module may include an RJ45 connector, but the data does not specify). Please refer to the datasheet for detailed interfacing information.
Typical Uses
- Embedded web servers and remote monitoring devices
- Industrial automation and control systems
- Home automation gateways
- Data loggers and sensor nodes
- IoT devices requiring wired Ethernet
What's in the Box
Package includes: 1 x WIZnet W5500 module.
Quick specs
- Operating Voltage (V)
- 3.3
- Memory Capacity
- Internal 32Kbytes Memory for Tx/Rx Buffers
- Shipping Weight
- 0.002 kg
- Shipping Dimensions
- 7 × 7 × 1 cm



















