
1 / 2 · Click to enlarge
At a glance
Made by WIZnet, this drivers and interfaces ic is a good fit for everyday home and hobby use. Main specs: manufacturer WIZnet; voltage range (v) 2.7 to 3.6V; operating temperature (°c) -40 to 85. Check that your power source supplies 2.7 to 3.6V before connecting it.
Key Highlights
- Manufacturer: WIZnet
- Voltage Range (V): 2.7 to 3.6V
- Operating Temperature (°C): -40 to 85
Ideal For
- Everyday use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Manufacturer | WIZnet |
|---|---|
| Voltage Range (V) | 2.7 to 3.6V |
| Operating Temperature (°C) | -40 to 85 |
| Communication Mode | Full Duplex, Half Duplex |
| Case/Package | QFN48 |
| Memory Capacity | 16kb |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
Overview
The WIZnet W6100-Q, made by WIZnet, is listed in our drivers and interfaces ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Manufacturer: WIZnet
- Voltage Range (V): 2.7 to 3.6V (quoted range is usually line-of-sight; walls and interference shorten it)
- Operating Temperature (°C): -40 to 85
- Communication Mode: Full Duplex, Half Duplex
- Case/Package: QFN48
- Memory Capacity: 16kb (more memory leaves room for larger programs and buffers)
- Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 1 × 1 × 1 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
NOTE: The new W6100 and W5100S are not fully pin-to-pin compatible with the W5100, but the software compatibility is kept, hence the software for the W5100 can be used with the W6100/W5100S without any modification.
Note: For more technical details go through Datasheet in the attachment section
Features:
- Supports hardwired TCP/IP protocols: TCP, UDP, IPv6, IPv4, ICMPv6, ICMPv4, IGMP, MLDv1, ARP, PPPoE
- Supports IPv4/IPv6 dual stack
- Supports 8 independent SOCKETs simultaneously with 32KB memory
- Supports SOCKET-less commands: ARP, ICMPv6 (ARP, DAD, NA, RS) command for IPv6 auto-configuration & network monitoring (PING, PING6)
- Supports Ethernet PHY power down mode & system clock switching for power save
- Supports wake on LAN over UDP
- Supports serial & parallel HOST interface: High speed SPI (MODE 0/3), system BUS with 2 address signal & 8bit data
- Internal 32Kbytes memory for TX/ RX Buffers
- 10BaseT/ 10BaseTe / 100BaseTX Ethernet PHY integrated
- Supports auto-negotiation (full/half duplex, 10 and 100-based)
- Supports auto-MDIX only on auto-negotiation mode
- Does not support IP fragmentation & jumbo packet
- 3V operation with 5V I/O signal tolerance
- Network indicator LEDs (full/half duplex, link, 10/100 speed, active)
- 48 Pin LQFP & QFN lead-free package (7x7mm, 0.5mm pitch)
- PIN-2-PIN compatible with W5100S
Package Includes:
1 x WIZnet W6100-QQuick specs
- Manufacturer
- WIZnet
- Voltage Range (V)
- 2.7 to 3.6V
- Operating Temperature (°C)
- -40 to 85
- Communication Mode
- Full Duplex, Half Duplex
- Case/Package
- QFN48
- Memory Capacity
- 16kb



















