Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact single-channel Class D amplifier board using the TPA3110D2 chip, operating from 12V to 24V. It delivers efficient high-power audio amplification for DIY and custom sound projects.

Key Highlights

  • TPA3110D2 Class D amplifier for high efficiency
  • Single channel output with BTL bridge circuit
  • Wide 12V to 24V DC power supply range
  • Overvoltage and output current protection
  • Compact board measuring 54mm in width
  • Low quiescent current draw

Ideal For

  • DIY audio enthusiasts building custom speakers
  • Makers creating portable sound systems
  • Car audio hobbyists needing a compact mono amp
  • Electronics students learning about Class D amplifiers
  • Anyone repairing or upgrading existing audio equipment

Buying Tip

Check that your power supply voltage and speaker impedance match the TPA3110D2 requirements to get the best performance.

Elecvora expert review

Our verdict

The XH-M542 offers a straightforward way to add efficient mono amplification to a project, with the trusted TPA3110D2 chip at its core. It is a solid choice for DIYers who need a compact board with protection features and a wide voltage range.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Efficient Class D operation with low heat generation
  • Wide 12V to 24V supply range for flexibility
  • Built-in overvoltage and overcurrent protection
  • Compact size fits tight spaces

Cons

  • Requires soldering for connections
  • Power supply and speaker not included
  • Single channel only, not stereo

Best for

DIY audio projects requiring a compact mono amplifier

Not ideal for

Those seeking a plug-and-play stereo amplifier

Specifications

No. of Channels1
Width (mm)54
Weight (g)55
Shipping Weight0.225 kg
Shipping Dimensions7 × 5 × 2 cm

What's in the box

  • 1 x XH-M542 Single Channel High Power Digital Audio Power Amplifier Board TPA3110D2

Frequently Asked Questions

What is the maximum output power of this amplifier board?
The output power depends on the supply voltage and speaker impedance. The TPA3110D2 is capable of delivering up to approximately 15W per channel into 8 ohms at 24V, but refer to the chip datasheet for exact figures.
Can I use this board with a 12V battery?
Yes, the board operates from 12V to 24V DC, so a 12V battery is suitable. Ensure the battery can supply enough current for your desired volume level.
Does this amplifier board come with a power supply?
No, the package includes only the amplifier board. You will need to provide a suitable DC power supply separately.
What type of speaker can I connect?
You can connect a speaker with an impedance of 4 to 8 ohms. The board is mono, so use a single speaker or wire multiple speakers in a way that presents a compatible load.
Is a heatsink required?
The TPA3110D2 is efficient, but at higher output levels or continuous use, a heatsink may be beneficial. The board does not include a heatsink, so consider adding one if operating near maximum power.
What is the difference between the variants mentioned?
The product may ship with different board markings or IC packages (32-pin or 16-pin), but all variants have the same working specifications. The variant shipped depends on availability.

Overview

The XH-M542 is a single-channel digital audio power amplifier board that uses the TPA3110D2 core technology. It is designed for builders who need a compact, efficient amplification solution for custom audio projects. The board operates from a 12V to 24V DC supply and employs a BTL bridge circuit to deliver high power output with low quiescent current. Its small size and front-facing IC layout make it easy to integrate into tight spaces while maintaining good input sensitivity and sound quality.

Key Features

  • TPA3110D2 amplifier IC: Provides efficient Class D amplification with high-definition sound quality.
  • Single-channel output: Ideal for mono audio setups or as a building block for multi-channel systems.
  • Wide voltage range: Accepts 12V to 24V DC, offering flexibility in power supply selection.
  • Protection circuits: Includes overvoltage protection and output current limiting for safe operation.
  • Compact design: Board width of 54mm and weight of 55g make it easy to install in various enclosures.
  • Reliable construction: No solder joints on the back of the circuit board, reducing the risk of short circuits.

Specifications Explained

Number of channels: This is a single-channel amplifier, meaning it amplifies one audio channel. It is suitable for mono applications or for building a multi-amp system where each channel is handled separately.

Width: The board is 54mm wide, which is compact enough to fit into small project boxes or existing equipment.

Weight: At only 55g, the board is lightweight and will not add significant bulk to your project.

Power supply: The board requires a DC supply between 12V and 24V. The actual output power depends on the supply voltage and load, but the TPA3110D2 is known for its efficiency in this range.

Compatibility and Requirements

This amplifier board requires a DC power source within the 12V to 24V range. It does not include a power supply, so you will need to provide one separately. The input accepts standard audio line-level signals from sources such as preamplifiers, mixers, or portable players. Output connections are made via solder pads or terminals (depending on the variant) to a speaker with an impedance suitable for the TPA3110D2 (typically 4 to 8 ohms). Ensure that your power supply can deliver sufficient current for your intended output level.

Typical Uses

  • DIY home audio systems and speaker builds
  • Car audio upgrades where a compact mono amplifier is needed
  • Portable sound systems and boomboxes
  • Computer speaker amplification
  • Public address and announcement systems
  • Educational electronics projects

What's in the Box

1 x XH-M542 Single Channel High Power Digital Audio Power Amplifier Board TPA3110D2

Quick specs

No. of Channels
1
Width (mm)
54
Weight (g)
55
Shipping Weight
0.225 kg
Shipping Dimensions
7 × 5 × 2 cm
See all specifications