
1 / 5 · Click to enlarge
AI Summary
A compact 6-60V charge control module with 10A current limiting, 0.1V voltage accuracy and relay switching for battery packs. It lets you set upper and lower voltage limits and tracks charging time on its display.
Key Highlights
- 6-60V DC operating range suits many battery pack voltages
- 10A maximum current limit with 0.1V control accuracy
- Relay control switch supports use while charging
- Display shows voltage, charge percentage and charging time
- Automatic parameter check and battery connection detection
- Compact board measuring 79 x 42 mm
Ideal For
- Solar storage builders working with 6-60V battery packs
- DIY electronics hobbyists managing lead-acid or lithium packs
- Makers who want adjustable charge thresholds rather than fixed presets
- Students and educators demonstrating battery charge control
- Technicians building small off-grid charging setups
Buying Tip
Confirm your pack's full-charge voltage and your source current both fall within the 6-60V and 10A limits before ordering, since the module controls the charge path rather than converting it.
Elecvora expert review
Our verdict
A useful, affordable control module for builders who want adjustable charge thresholds and visible status rather than a sealed plug-and-play charger. It rewards careful wiring and parameter setup, and its 10A ceiling keeps it in the small-to-mid pack territory.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Adjustable upper and lower voltage limits with 0.1V accuracy
- Display shows voltage, charge percentage and charging time
- Relay switching supports use while charging
- Parameter and battery connection checks catch common setup errors
- Compact 79 x 42 mm board
Cons
- No battery, source or wiring included
- 10A limit restricts use to smaller packs
- Direct output means no voltage conversion or isolation
Best for
DIY solar storage and battery pack projects in the 6-60V range
Not ideal for
Users wanting a sealed plug-and-play charger with no configuration
Specifications
| Operating Voltage (VDC) | 6~60 |
|---|---|
| Current limit control | 10A (max) |
| Control Accuracy | 0.1V |
| Output Type | Direct Output, Output Voltage / Current = Input Voltage / |
| Control Type | Voltage Control, Relay Control Switch, Support use while charging |
| Additional Specs. | Fit for All kinds of batteries, lithium batteries, etc. |
| Dimensions (L x W x H) mm | 79 x 42 |
| Shipping Weight | 0.05 kg |
| Shipping Dimensions | 6 × 5 × 3 cm |
Frequently Asked Questions
What voltage range does this module support?
How much current can it control?
Does it work with lithium batteries?
What does the display show?
What does nbE mean on the display?
Can I use it while charging?
Overview
The XY-L10A is a charge control module built for managing battery packs in the 6V to 60V DC range. Instead of a fixed preset, it gives you adjustable voltage control: you set an upper limit and a lower limit, and the module switches charging through its relay according to those values. Control accuracy is 0.1V, and current is limited to a maximum of 10A.
This makes it a practical building block for solar storage and DIY battery projects where the pack voltage varies and you want charging behaviour you can tune. The onboard display reports battery voltage, charge percentage and charging time, so you can see what the pack is doing without extra instruments.
Key Features
- Adjustable voltage control: define upper and lower voltage thresholds to shape the charge cycle.
- Relay control switch: the module switches charging through a relay and supports use while charging.
- Direct output: output voltage and current follow the input, so the module does not add a separate conversion stage.
- Charging time recording: with charge-time control off, the module records a full charge time and shows it on the time display.
- Parameter check: if the lower limit is set above the upper limit on exit, the display flashes ERR as a reminder.
- Battery connection detection: when no battery is attached, the lower line shows nbE.
- UART support: data upload and parameter setting are available at TTL level.
Specifications Explained
6-60V operating voltage is the working range of the module and the packs it is intended to manage. Match your pack's nominal and charging voltages to this window before wiring anything.
10A current limit is the maximum the module is rated to control. Your charge source and wiring should be planned around that ceiling, not above it.
0.1V control accuracy means threshold settings resolve in fine steps, which matters when you are working with tight upper and lower limits on smaller packs.
Direct output means the output voltage and current equal the input, so the module controls the charge path rather than regulating a separate output rail.
Voltage control and relay switching describe how charging is started and stopped: thresholds are compared, and the relay does the switching.
Compatibility and Requirements
The module is described as suitable for all kinds of batteries, including lithium batteries, within the stated 6-60V range. It does not include a battery, a charge source or wiring, so you will need to supply those. Configuration is done through the module's parameters, and UART access at TTL level is available if you want to upload data or set parameters digitally.
Because output follows input, check that your source voltage and current suit the pack you are charging before connecting anything.
Typical Uses
- Solar storage packs that need adjustable charge thresholds
- Lead-acid battery banks in small off-grid setups
- Lithium pack charging projects with defined voltage limits
- Bench testing and battery health experiments
- Educational builds where charge behaviour should be visible
What's in the Box
Package contents are not specified for this listing. Check the product data before ordering if you need to confirm what is included.
Quick specs
- Operating Voltage (VDC)
- 6~60
- Current limit control
- 10A (max)
- Control Accuracy
- 0.1V
- Output Type
- Direct Output, Output Voltage / Current = Input Voltage /
- Control Type
- Voltage Control, Relay Control Switch, Support use while charging
- Additional Specs.
- Fit for All kinds of batteries, lithium batteries, etc.













