Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 108mm steel timing belt pulley with a 17mm inner bore and H-type install hole. It is designed to mount on MY1020ZXFH, MY1122ZXF, MY1020ZXF and BM1418ZXF motors for reliable belt drive.

Key Highlights

  • 108mm outer diameter steel pulley for belt-driven motor setups
  • 17mm inner install hole sized for the listed motor shafts
  • H-type install hole pattern for direct mounting
  • Steel construction with a black finish for durability
  • Weighs 208g, keeping drivetrain mass low
  • Compatible with MY1020ZXFH, MY1122ZXF, MY1020ZXF and BM1418ZXF

Ideal For

  • Builders using MY1020ZXFH or MY1122ZXF motors
  • E-scooter and e-bike drivetrain repairs
  • DIY belt-drive projects needing a 17mm bore pulley
  • Makers replacing a worn 108mm steel pulley
  • Personal mobility builds with H-type motor mounting

Buying Tip

Measure your motor shaft and check the H-type mounting pattern against your motor before ordering, since the 17mm bore and mount type are fixed.

Elecvora expert review

Our verdict

A solid, purpose-built steel pulley for a specific set of YALU motor models. Its value comes from the exact 17mm bore and H-type mount, so it fits correctly where those dimensions match.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Steel body for strength under belt load
  • Defined 17mm bore and H-type mount for a precise fit
  • Light 208g weight
  • Black finish
  • Clear compatibility list for four motor models

Cons

  • Fits only the listed motor models
  • No belt or mounting hardware included
  • Bore size is fixed, so no adjustment for other shafts

Best for

Owners of MY1020ZXFH, MY1122ZXF, MY1020ZXF or BM1418ZXF motors needing a 108mm steel pulley

Not ideal for

Motors with a shaft other than 17mm or a different mounting pattern

Specifications

Item TypePulley
CompatibilityMY1020ZXFH/MY1122ZXF/M Y1020ZXF/BM1418ZXF
MaterialSteel
ColorBlack
Outer Diameter (mm)108
Install hole diameter17mm
Weight (g)208
Shipping Weight1 kg
Shipping Dimensions19 × 13 × 3 cm

What's in the box

  • 1 x YALU 108mm pulley with H-type install hole and 17mm inner bore

Frequently Asked Questions

Which motors does this pulley fit?
It is listed as suitable for MY1020ZXFH, MY1122ZXF, MY1020ZXF and BM1418ZXF motors. Confirm your motor model before ordering.
What is the inner hole size?
The inner install hole diameter is 17mm. Your motor shaft should match this bore for a correct fit.
What does H-type install hole mean?
It describes the mounting hole pattern used to attach the pulley to the motor. It is specified for the four compatible motor models.
What is the pulley made of?
The pulley is made of steel with a black finish.
What is included in the package?
The package contains one 108mm pulley with an H-type install hole and a 17mm inner bore.
How should I care for the pulley?
Keep the pulley clean and check belt alignment and mounting tightness periodically during normal use.

Overview

The YALU 108mm timing belt pulley is a steel wheel designed to transfer drive from a motor shaft to a belt. With a 108mm outer diameter, a 17mm inner install hole and an H-type mounting pattern, it is intended for use with MY1020ZXFH, MY1122ZXF, MY1020ZXF and BM1418ZXF motors. The black-finished steel body is built to hold its shape while carrying belt tension, helping keep the drive line steady during normal operation.

Key Features

  • 108mm outer diameter suited to belt-driven motor assemblies
  • 17mm inner install hole for the matching motor shaft
  • H-type install hole pattern for straightforward mounting
  • Steel construction with a black finish
  • Light 208g weight that adds little to the drivetrain

Specifications Explained

The outer diameter of 108mm defines the pulley's working size and how it sits within your belt layout. The 17mm inner install hole is the critical fit dimension: your motor shaft must match this bore for the pulley to seat correctly. The H-type install hole refers to the mounting pattern used to secure the pulley to the motor, and it is specified for the four motor models listed. Steel is chosen for strength and resistance to wear under belt load, while the 208g weight keeps the rotating mass modest. The pulley ships in a compact 19 x 13 x 3 cm package with a shipping weight of 1 kg.

Compatibility and Requirements

This pulley is listed as suitable for MY1020ZXFH, MY1122ZXF, MY1020ZXF and BM1418ZXF motors. Before ordering, confirm that your motor matches one of these models and that your shaft and mounting pattern align with the 17mm bore and H-type install hole. No other compatibility is stated.

Typical Uses

It is intended for belt-drive builds and repairs around the listed motor families, such as small electric scooter, e-bike and personal mobility projects, plus general DIY drivetrain work where a 108mm steel pulley with a 17mm bore is required.

What's in the Box

  • 1 x YALU 108mm pulley with H-type install hole and 17mm inner bore

Quick specs

Item Type
Pulley
Compatibility
MY1020ZXFH/MY1122ZXF/M Y1020ZXF/BM1418ZXF
Material
Steel
Color
Black
Outer Diameter (mm)
108
Install hole diameter
17mm
See all specifications