
At a glance
This flow sensors is a good fit for makers, students and electronics hobbyists. Main specs: working water pressure(mpa) ≤2.0; operating temperature (°c) -25 ~ +80; operating humidity 35% - 80% RH. Check that your power source supplies 5 ~ 18 before connecting it.
Key Highlights
- Working water pressure(MPa): ≤2.0
- Operating Temperature (°C): -25 ~ +80
- Operating humidity: 35% - 80% RH
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Max Water Flow(L/min) | 1 to 30 |
|---|---|
| Working water pressure(MPa) | ≤2.0 |
| Operating Temperature (°C) | -25 ~ +80 |
| Operating humidity | 35% - 80% RH |
| Duty cycle | 50% ±10% output |
| Rise Time | 0.04µsec |
| Pulse | 450/L |
| Cable Length | 15 |
| Outer Diameter (mm) | 20 |
| Diameter (mm) | Inlet/Outlet: 11 |
| Length (mm) | 62.5 |
| Width (mm) | 36 |
| Weight (g) | 52 |
| Model No. / Name | YF-S201 |
| Operating Voltage (VDC) | 5 ~ 18 |
| Shipping Weight | 0.1 kg |
| Shipping Dimensions | 9 × 6 × 6 cm |
Overview
The YF-S201 Water Flow Sensor 1–30 L/min White is listed in our flow sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Max Water Flow(L/min): 1 to 30
- Working water pressure(MPa): ≤2.0
- Operating Temperature (°C): -25 ~ +80
- Operating humidity: 35% - 80% RH
- Duty cycle: 50% ±10% output
- Rise Time: 0.04µsec
- Pulse: 450/L
- Cable Length: 15 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This is YF-S201 Water Flow Measurement Sensor with 1-30Liter/min Flow Rate white sensor. This sensor sits in line with your water line and contains a pinwheel sensor to measure how much liquid has moved through it. There's an integrated magnetic hall effect sensor that outputs an electrical pulse with every revolution. The hall effect sensor is sealed from the water pipe and allows the sensor to stay safe and dry.
By counting the pulses from the output of the sensor, you can easily calculate water flow. Each pulse is approximately 2.25 milliliters.
Note this isn't a precision sensor, and the pulse rate does vary a bit depending on the flow rate, fluid pressure, and sensor orientation. It will need careful calibration if better than 10% precision is required. However, it's great for basic measurement tasks!
We have an example Arduino sketch(check the ATTACHMENTS tab) that can be used to quickly test the sensor, it will calculate the approximate flow of water in liters/hour. The pulse signal is a simple square wave so it's quite easy to log and convert into liters per minute using the following formula.
Connection
Red wire: +5V. Black wire: GND. Yellow wire: PWM output.
Features :
- 1/2" nominal pipe connections, 0.78" outer diameter, 1/2" of thread.
- The simple and compact module.
- Easy to Install.
- High Sealing Performance.
- High-Quality Hall Effect Sensor.
Package Includes :
1 x YF-S201 Water Flow Measurement Sensor with 1-30Liter/min Flow Rate.
.
Quick specs
- Max Water Flow(L/min)
- 1 to 30
- Working water pressure(MPa)
- ≤2.0
- Operating Temperature (°C)
- -25 ~ +80
- Operating humidity
- 35% - 80% RH
- Duty cycle
- 50% ±10% output
- Rise Time
- 0.04µsec
















