Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The YIHUA 134B110 is a 24 VDC ceramic/EVO soldering iron heater made as a direct replacement for several YIHUA stations. It restores fast tip recovery and steady temperature so you can keep soldering without replacing the whole iron.

Key Highlights

  • 24 VDC ceramic/EVO heating element for efficient thermal response
  • Direct replacement for 853AAA-I basic, 948DQ-III, 995D+-I SJ, 938BD-I and 938BD+-II
  • Compact cartridge form at 74 mm long and 14 mm wide
  • Restores tip heat recovery and temperature stability
  • Straightforward swap that avoids replacing the entire iron
  • Lightweight part at 0.03 kg shipping weight

Ideal For

  • Electronics repair technicians maintaining YIHUA soldering stations
  • Hobbyists reviving a compatible YIHUA iron that heats slowly
  • Small workshops keeping spare heaters on hand to cut downtime
  • Makers doing lead-free and tin-lead soldering work
  • Anyone replacing a worn heater instead of buying a new iron

Buying Tip

Confirm your station is one of the listed models (853AAA-I basic, 948DQ-III, 995D+-I SJ, 938BD-I or 938BD+-II) and plan to recalibrate the temperature after fitting the new heater.

Elecvora expert review

Our verdict

A sensible, low-cost maintenance part that brings a compatible YIHUA iron back to steady performance instead of pushing you toward a new station. The fit is specific, so the main task is confirming your model before ordering.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Direct replacement for five listed YIHUA iron models
  • Ceramic/EVO core supports quick heat response
  • Compact 74 x 14 mm cartridge body fits inside the handle
  • Low shipping weight makes it easy to keep as a spare

Cons

  • Only compatible with the listed YIHUA models
  • Requires disassembly of the iron and recalibration after fitting
  • No installation tools or instructions included

Best for

Owners of compatible YIHUA irons with a failing or slow heater

Not ideal for

Irons from other brands or unlisted YIHUA models

Specifications

Item TypeSoldering Iron Heater
Model No. / Name134B110
Rated Voltage (VDC)24
MaterialCeramic/EVO heating element
CompatibilityDirect replacement for 853AAA-I basic/948DQ-III/995D+-I SJ/938BD-I/938BD+-II.
Length (mm)74
Width (mm)14
Shipping Weight0.03 kg
Shipping Dimensions17 × 5 × 2 cm

What's in the box

  • 1 x YIHUA 134B110 Soldering Iron Heater

Frequently Asked Questions

Which soldering irons does this heater fit?
It is a direct replacement for the YIHUA 853AAA-I basic, 948DQ-III, 995D+-I SJ, 938BD-I and 938BD+-II. No other models are listed as compatible.
What voltage does the heater use?
The 134B110 is rated at 24 VDC, matching the supply of the compatible YIHUA soldering irons.
How do I know the heater needs replacing?
Common signs are slow warm-up, poor tip recovery after a joint and temperature that will not hold steady. Fitting a new heater is the usual fix when these appear.
Do I need to recalibrate the station afterwards?
Yes. After installing a new heater, recalibrate the station so the displayed temperature matches the actual tip temperature.
What is included with the part?
The package contains one YIHUA 134B110 soldering iron heater. Tools and instructions are not included.
What are the dimensions of the heater?
The heater body is 74 mm long and 14 mm wide, with a shipping weight of 0.03 kg.

Overview

The YIHUA 134B110 is a replacement soldering iron heater for a specific group of YIHUA soldering stations. It is the heating module that sits inside the iron and delivers heat to the tip, and it is intended to be fitted when the original heater has worn out or stopped performing. Because it is made to the same form as the factory part, it installs in the handle assembly without modification.

This is a maintenance component rather than an upgrade. Its job is to return a compatible iron to normal operation: quick warm-up, stable tip temperature and predictable heat delivery while you work.

Key Features

  • Ceramic/EVO heating element: the core is built from ceramic/EVO material, chosen for efficient heat generation and long service in continuous use.
  • 24 VDC rated voltage: matches the supply expected by the listed YIHUA soldering irons.
  • Cartridge-style body: a slim module measuring 74 mm by 14 mm that slots into the iron handle.
  • Factory-matched fit: designed as a direct replacement for the compatible models listed below.
  • Light and compact: shipping weight is just 0.03 kg, so it is easy to store as a spare part.

Specifications Explained

Rated voltage (24 VDC) tells you which irons this heater is built for. It is not a universal part, so check your station model before ordering. Length and width (74 mm x 14 mm) describe the physical size of the heater body, which determines whether it fits the handle and reaches the tip correctly. Material (ceramic/EVO) is the heating core type; ceramic elements are common in soldering irons because they heat quickly and hold temperature well. Shipping dimensions (17 x 5 x 2 cm) refer to the retail packaging, not the installed size.

Compatibility and Requirements

This heater is a direct replacement for the YIHUA 853AAA-I basic, 948DQ-III, 995D+-I SJ, 938BD-I and 938BD+-II soldering irons. Fit other models is not stated, so treat the list as the full compatibility range. After fitting a new heater, recalibrate the station so the displayed temperature matches the tip. No other accessories are required beyond the iron and station you already own.

Typical Uses

Use the 134B110 when a compatible YIHUA iron no longer heats properly, takes too long to reach temperature, or shows unstable readings during a session. It suits repair benches, electronics hobby work and small production setups where a station is in regular use and downtime matters. It works with both lead-free and tin-lead solder alloys, since the heater only supplies heat and does not contact the solder itself.

What's in the Box

  • 1 x YIHUA 134B110 Soldering Iron Heater

Quick specs

Item Type
Soldering Iron Heater
Model No. / Name
134B110
Rated Voltage (VDC)
24
Material
Ceramic/EVO heating element
Compatibility
Direct replacement for 853AAA-I basic/948DQ-III/995D+-I SJ/938BD-I/938BD+-II.
Length (mm)
74
See all specifications