
1 / 3 · Click to enlarge
AI Summary
The YIHUA 8858-I is a compact 700W hot air station with LED display and adjustable temperature and airflow for soldering and desoldering work. Its blower airflow and three included nozzles make it useful for rework on sensitive components like QFP, PLCC and BGA.
Key Highlights
- 700W output power for fast heating during rework
- Blower-type airflow rated up to 120 L/min maximum
- LED display for reading temperature and airflow settings
- Adjustable temperature and airflow controls on the panel
- Compact 340 mm body weighing around 511 g
- Supplied with a holder and three nozzles
Ideal For
- Electronics repair technicians handling QFP and BGA rework
- Hobbyists working on surface-mount soldering projects
- Small workshops that need a compact hot air station
- Makers and students learning hot air rework
- Bench setups with limited space
Buying Tip
Confirm whether you need the 110V 60Hz or 220V 50Hz version before ordering, since the station is supplied in two voltage variants.
Elecvora expert review
Our verdict
The YIHUA 8858-I packs 700W of hot air output and adjustable controls into a compact, lightweight body, which suits bench work on small boards. It is a sensible entry point for QFP, PLCC and BGA rework where space and budget are limited.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 700W output with blower airflow up to 120 L/min
- LED display and adjustable temperature and airflow
- Compact 340 mm body at around 511 g
- Holder and three nozzles included
Cons
- Sold in separate 110V and 220V versions, so the correct one must be chosen
- No temperature range or airflow figures beyond the maximum are stated
- No warranty or certification details are provided
Best for
Compact bench rework on QFP, PLCC and BGA components
Not ideal for
Large boards or jobs needing a full-size rework station with extra features
Specifications
| Item Type | Hot Air Station |
|---|---|
| Model No. / Name | 8858 I |
| Working Voltage | 110V ±10% 60Hz, ~220V ±10% 50Hz |
| Output Power | 700W |
| Display Mode | LED display |
| Operating Temperature (°C) | 0~40 |
| Storage Temperature (°C) | -20~80 |
| Length (mm) | 340 |
| Width (mm) | 120 |
| Weight (g) | 511 |
| Shipping Weight | 0.515 kg |
| Shipping Dimensions | 35 × 14 × 8 cm |
What's in the box
- 1 x YIHUA 8858-I Portable Hot Air Station
- 1 x Holder
- 3 x Nozzles
Frequently Asked Questions
What voltage does the YIHUA 8858-I use?
What components can it work on?
How much airflow does it produce?
What is included with the station?
How should I store it?
What are the operating conditions?
Overview
The YIHUA 8858-I is a portable hot air station for soldering, desoldering and component rework. It combines a 700W heating system with a blower-type airflow design rated up to 120 L/min, giving you a focused stream of hot air for small boards and tight work areas. Temperature and airflow are adjusted at the unit and shown on an LED display, so settings can be checked at a glance during a job.
At 340 mm long and around 511 g, the station is easy to place on a crowded bench or move between workstations. It is intended for technicians, repair shops and hobbyists who handle surface-mount packages and need controlled heat rather than a large, fixed rework station.
Key Features
- 700W heating output for responsive warm-up and sustained hot air.
- Blower airflow up to 120 L/min for directing heat onto the joint area.
- LED display shows operating information clearly during use.
- Adjustable temperature and airflow let you match settings to the component and board.
- Portable format with a 340 mm length and low weight for easy handling.
- Nozzle set included so you can choose a suitable outlet for the task.
Specifications Explained
Power and voltage
The station is rated at 700W and is offered in a 110V ±10% 60Hz version and a 220V ±10% 50Hz version. Check which version you are ordering so it matches your local mains supply.
Airflow
The blower-type airflow reaches a maximum of 120 L/min. Higher airflow moves more hot air to the work area, while lower settings give gentler heating for delicate parts.
Display and controls
An LED display reports settings, and both temperature and airflow are adjustable. This helps when switching between different component sizes and solder types.
Size and weight
The unit measures 340 mm in length, 120 mm in width and weighs about 511 g. The handle measures roughly L305 x W60 x H60 mm (±3 mm).
Environmental limits
Operating temperature is 0 to 40 °C and storage temperature is -20 to 80 °C.
Compatibility and Requirements
The YIHUA 8858-I requires a mains supply matching its version: 110V ±10% 60Hz or 220V ±10% 50Hz. It is intended for soldering and desoldering work on sensitive components such as QFP, PLCC and BGA. Use nozzles from the supplied set or compatible accessories for the task at hand.
Typical Uses
- Removing and refitting QFP, PLCC and BGA components
- General electronics repair and rework on small boards
- Heat-shrink and controlled hot air tasks around a bench
- Hobby and educational soldering projects
What's in the Box
- 1 x YIHUA 8858-I Portable Hot Air Station
- 1 x Holder
- 3 x Nozzles

Quick specs
- Item Type
- Hot Air Station
- Model No. / Name
- 8858 I
- Working Voltage
- 110V ±10% 60Hz, ~220V ±10% 50Hz
- Output Power
- 700W
- Display Mode
- LED display
- Operating Temperature (°C)
- 0~40


















