Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 5-pin female buckle housing connector with 300mm of 28 AWG wire pre-attached at a 2.5mm pitch. The pre-fitted wire saves crimping time and keeps harness builds consistent.

Key Highlights

  • 5-pin female buckle housing with secure latching retention
  • 2.5mm pitch spacing for compact wire-to-wire layouts
  • 300mm of 28 AWG wire already attached to the housing
  • Rated for -25°C to +85°C operating temperatures
  • Lightweight assembly at roughly 1g shipping weight
  • Suits harness builds, prototyping and equipment repair

Ideal For

  • Electronics hobbyists building wire harnesses
  • Bench engineers prototyping small circuits
  • Technicians repairing internal device wiring
  • Makers assembling compact enclosed electronics
  • Anyone replacing a damaged 2.5mm pitch connector

Buying Tip

Confirm the mating half is a male 5-pin connector on the same 2.5mm pitch before ordering, since the housing alone will not complete a connection.

Elecvora expert review

Our verdict

A tidy, low-cost option for anyone who wants a 5-pin 2.5mm pitch connection without doing their own crimping. The pre-fitted 28 AWG wire and latching housing make it a sensible consumable for harness work.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Wire already attached, so no crimping tools needed
  • Buckle housing adds retention over friction-fit types
  • Compact 2.5mm pitch suits tight layouts
  • Wide -25°C to +85°C operating range
  • Very light and easy to store in bulk

Cons

  • Mating male connector is not included
  • 28 AWG limits it to low-current signal and light power use
  • Bare wire ends still require soldering or splicing

Best for

Harness builders and prototypers working with 2.5mm pitch 5-pin connections

Not ideal for

High-current power wiring or outdoor-exposed installations

Specifications

ManufacturerZGWD
Pitch Spacing (mm)2.5
No. of Pins5
Wire Length(mm)300
Operating Temperature (°C)-25°C ~+85°C
Allowed Wire Size (AWG)28
Connector TypeBuckle Housing
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x HA-05Y 2.5mm 5-pin Female Buckle Housing Connector with 300mm Wire (28 AWG)

Frequently Asked Questions

What is this connector used for?
It is a wire-to-wire assembly for joining five lines between two points in a circuit, commonly in harnesses, prototypes and internal device wiring.
Do I need a matching connector?
Yes. This is the female housing with wire attached, so you need a compatible male 5-pin counterpart on the same 2.5mm pitch to complete the connection.
Are the wire ends ready to use?
The 300mm 28 AWG leads are attached to the housing but arrive bare at the free end, so you will need to solder, splice or terminate them for your circuit.
What voltage or current can it handle?
That information is not specified for this product. The 28 AWG wire suits low-current signal and light power runs, so check your circuit requirements before use.
What is included in the package?
One HA-05Y 2.5mm 5-pin female buckle housing connector with 300mm of 28 AWG wire attached. No mating connector or tools are included.
How should I store and handle it?
Keep it in a dry place and avoid pulling on the wire where it enters the housing, since that strain point is the most likely place for damage.

Overview

The ZGWD HA-05Y is a wire-to-wire connector assembly built around a 5-pin female buckle housing. Each housing comes with 300mm of 28 AWG wire already attached, so the assembly is ready to route or splice as soon as it arrives. The 2.5mm pitch keeps the five contacts closely spaced, which helps in compact enclosures and dense harness layouts.

The buckle housing style provides a positive latch rather than a simple friction fit, which is useful anywhere vibration or repeated handling could work a plain connector loose. With an operating range of -25°C to +85°C, the assembly is suited to normal indoor electronics, bench work and enclosed equipment.

Key Features

  • 5-pin female housing: five contacts in a single row on a 2.5mm pitch.
  • Buckle housing design: a latching body that holds the mating half in place.
  • Pre-attached 300mm wire: 28 AWG leads already fitted, cutting out the crimping step.
  • Wide operating window: rated from -25°C to +85°C.
  • Lightweight: approximately 1g shipping weight and a 1 × 1 × 1 cm shipping footprint.

Specifications Explained

2.5mm pitch

Pitch is the centre-to-centre distance between adjacent pins. At 2.5mm, the five contacts occupy a narrow strip, which matters when board space or enclosure room is tight. Matching pitch is the single most important check when pairing this housing with a mating part.

5 pins

Five positions give you room for a signal bundle, a small power and ground set, or a mix of both, depending on your design. Count your required lines before ordering so you do not run short.

28 AWG wire, 300mm long

28 AWG is a thin gauge suited to low-current signal wiring and light power runs inside equipment. The 300mm length gives enough slack to reach between two points in a small build without leaving a large coil of excess wire to manage.

Buckle housing

The buckle style adds a mechanical latch. That retention helps in assemblies that get handled, moved or exposed to mild vibration.

Operating temperature

The -25°C to +85°C range covers typical indoor and enclosed electronics use. It is not intended as a specification for extreme or outdoor-exposed environments.

Compatibility and Requirements

This is a female housing with wire attached, so it needs a matching male counterpart of the same 2.5mm pitch and 5-pin layout to complete a connection. The wire ends arrive bare, so plan for soldering, splicing or terminating them to suit your circuit. No mating connector, terminals or tools are included.

Typical Uses

  • Wire harness assembly and repair
  • Prototyping and bench testing
  • Internal wiring in small electronic devices
  • Signal and low-current runs in enclosed equipment
  • Replacing a damaged connector in an existing loom

What's in the Box

One HA-05Y 2.5mm 5-pin female buckle housing connector with 300mm of 28 AWG wire attached.

Quick specs

Manufacturer
ZGWD
Pitch Spacing (mm)
2.5
No. of Pins
5
Wire Length(mm)
300
Operating Temperature (°C)
-25°C ~+85°C
Allowed Wire Size (AWG)
28
See all specifications