Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A pre-wired 8-pin female housing connector with 2.00mm pitch and a 300mm length of 28 AWG wire already attached. It saves crimping time and gives you a compact, ready-to-route lead for dense electronics builds.

Key Highlights

  • 8-pin female double row housing connector
  • 2.00mm pitch spacing for compact layouts
  • Pre-attached 300mm wire in 28 AWG
  • Factory-fitted lead removes manual crimping
  • Suits dense boards and small enclosures
  • Lightweight single-unit pack for bench spares

Ideal For

  • Makers building compact electronics prototypes
  • Repair technicians replacing damaged harness leads
  • Hobbyists wiring sensors and small modules
  • Electronics students learning connector layouts
  • Bench users who keep pre-made leads as spares

Buying Tip

Measure the pitch and count the pins on your existing mating header before ordering, because a 2.00mm housing will not seat on a 2.54mm or 1.25mm part.

Elecvora expert review

Our verdict

A tidy, purpose-built lead for anyone working with 2.00mm pitch connectors who would rather not crimp eight tiny contacts by hand. It is a simple part, but the pre-attached 300mm wire makes it genuinely convenient for compact builds.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Pre-wired housing saves crimping time
  • Compact 2.00mm pitch suits dense layouts
  • Useful 300mm lead length
  • Lightweight and easy to store as a spare
  • Clear 8-pin double row configuration

Cons

  • Only one connector is included per pack
  • 28 AWG limits it to signal-level wiring
  • Mating header is not included

Best for

Compact electronics builds using 2.00mm pitch connectors

Not ideal for

High-current power wiring or setups needing a different pitch

Specifications

ManufacturerZGWD
Pitch Spacing (mm)2
No. of Pins8
GenderFemale
Allowed Wire Size (AWG)28
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x PHB-8Y 2.00mm 8-pin Female Double Row Housing Connector with 300mm Wire (28 AWG)

Frequently Asked Questions

What pitch is this connector?
It has a 2.00mm pitch, meaning the contact centres are 2.00mm apart. Your mating header must use the same 2.00mm pitch.
How many pins does it have?
It is an 8-pin connector arranged in a double row, so two rows of four contacts.
Is the wire already attached?
Yes. Each unit comes with a 300mm length of 28 AWG wire already fitted to the female housing.
What wire size is used?
The lead uses 28 AWG wire, which is a thin conductor suited to signal-level connections rather than high-current paths.
What is included in the package?
The package contains one PHB-8Y 2.00mm 8-pin female double row housing connector with 300mm of 28 AWG wire attached.
How should I store it?
Keep it in a dry place and avoid sharp bends or pulling on the wire where it enters the housing, which helps protect the connection.

Overview

The ZGWD PHB-8Y is a female double row housing connector with a 2.00mm pitch and eight pin positions. It comes with a 300mm length of 28 AWG wire already attached to the housing, which means the lead is ready for routing as soon as it arrives. Instead of handling loose terminals and a crimp tool, you get a consistent, factory-fitted connection point for your project.

This is a small, light component. Shipping weight is listed at just 0.001 kg with shipping dimensions of 1 x 1 x 1 cm, so it is easy to keep a few on hand as bench spares.

Key Features

  • Female housing with eight pin positions in a double row arrangement
  • 2.00mm pitch spacing keeps the connector footprint compact
  • 300mm wire length gives useful reach inside small enclosures
  • 28 AWG wire suits fine, low-current signal runs
  • Pre-attached cable removes the need for manual crimping
  • Manufactured by ZGWD under part number PHB-8Y

Specifications Explained

Pitch spacing: 2.00mm

Pitch is the distance between adjacent contact centres. At 2.00mm, this housing sits between the larger 2.54mm style and the very fine 1.25mm class, giving you eight contacts without a wide footprint. Check your mating header's pitch before ordering, since a mismatch will not seat correctly.

Pin count and gender

Eight pins in a double row means two rows of four contacts. This female housing is designed to accept the corresponding male pins on a mating part. Confirm both the row layout and the gender of your existing connector.

Wire size: 28 AWG

28 AWG is a thin conductor, well suited to signal-level wiring in compact assemblies. It is not intended for high-current paths, so plan your circuit accordingly.

Wire length: 300mm

The 300mm lead provides enough slack to reach across a small board or enclosure while staying manageable in tight builds. Trim to length if you need a shorter run.

Compatibility and Requirements

This connector requires a mating male header or plug with 2.00mm pitch, eight pins and a matching double row layout. No other accessories, adapters or tools are included. Because the wire is already attached, you will need your own method of terminating the free ends, such as soldering or your preferred splice. Refer to the manufacturer datasheet for detailed drawings and contact dimensions before committing to a design.

Typical Uses

  • Signal wiring inside compact electronic assemblies
  • Prototype and breadboard-adjacent builds
  • Replacement leads for existing harnesses
  • Sensor and module connections in small enclosures
  • Bench spares and repair kits

What's in the Box

One PHB-8Y 2.00mm 8-pin female double row housing connector with 300mm of 28 AWG wire attached.

Quick specs

Manufacturer
ZGWD
Pitch Spacing (mm)
2
No. of Pins
8
Gender
Female
Allowed Wire Size (AWG)
28
Shipping Weight
0.001 kg
See all specifications