Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 5-pin female housing connector on a 2.00mm pitch, supplied with a 300mm 28 AWG lead already fitted. It saves crimping time and gives compact builds a secure, repeatable connection.

Key Highlights

  • 5-pin female housing on a compact 2.00mm pitch
  • 300mm pre-attached lead reduces assembly time
  • 28 AWG wire suits low-current signal and power links
  • Keyed housing helps prevent misalignment
  • Lightweight part, easy to keep as bench stock
  • Suitable for RC, drone and general electronics wiring

Ideal For

  • RC and drone builders wiring compact electronics
  • DIY electronics hobbyists making custom harnesses
  • Repair technicians replacing short multi-way leads
  • Product developers prototyping small devices
  • Makers working with 2.00mm-pitch connections

Buying Tip

Confirm your mating header or receptacle is also 2.00mm pitch and 5-pin before ordering, since 2.54mm parts will not fit.

Elecvora expert review

Our verdict

A practical, no-fuss connector for compact five-way wiring, especially when you would rather not crimp contacts by hand. It is a sensible stock item for small builds, provided your circuit stays within what 28 AWG wire can safely carry.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Pre-attached wire saves crimping time
  • Compact 2.00mm pitch suits dense layouts
  • Keyed housing reduces wrong-way insertion
  • Lightweight and easy to store as bench stock

Cons

  • No voltage or current rating is stated in the product data
  • Free end is unterminated and needs soldering or another termination
  • Requires a matching 2.00mm-pitch mating part, which is not included

Best for

Compact electronics and RC wiring where a short five-way lead is needed

Not ideal for

High-current power connections or systems needing a stated current rating

Specifications

ManufacturerZGWD
Pitch Spacing (mm)2
No. of Pins5
GenderFemale
Allowed Wire Size (AWG)28
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x PA-05Y 2.00mm 5-pin female housing connector with 300mm 28 AWG wire

Frequently Asked Questions

What is the pitch of this connector?
The pitch is 2.00mm, meaning the contact centres are 2mm apart. Use it with a mating part of the same pitch and pin count.
How many pins does it have and what gender is it?
It is a female housing with five pins. It mates with a compatible male header or receptacle.
What length and gauge is the wire?
The attached wire is 300mm long and 28 AWG. It is suited to low-current signal and power links.
Is the free end of the wire ready to use?
The free end is unterminated, so you will need to strip and solder it, or fit another suitable termination, for your project.
What is included in the package?
The package contains one PA-05Y 2.00mm 5-pin female housing connector with a 300mm 28 AWG wire attached.
How should I care for this connector?
Keep the contacts clean and dry, avoid pulling on the wire to disconnect, and store it in a small bag away from moisture and sharp edges.

Overview

The ZGWD PA-05Y is a female housing connector with five pins set on a 2.00mm pitch. Each connector comes with a 300mm length of 28 AWG wire already terminated into the housing, so you can route and solder the free end without crimping a single contact yourself. That makes it a convenient building block for compact wiring where a multi-way, keyed connection is needed and space is tight.

Key Features

  • Five-pin female housing: a single connector carries five separate lines, reducing the number of individual leads in a harness.
  • 2.00mm pitch: a small contact spacing that suits dense board and module layouts.
  • Pre-attached 300mm wire: ready to trim, strip and solder at the free end.
  • 28 AWG conductor: thin and flexible, appropriate for low-current signal and power connections.
  • Keyed housing: the moulded shape helps the connector seat in one orientation only, lowering the risk of a reversed plug-in.

Specifications Explained

Pitch spacing (2mm) is the distance between adjacent contact centres. It determines which mating headers and receptacles will fit, so match it to a 2.00mm-pitch counterpart rather than a 2.54mm one. Pin count (5) sets how many independent circuits the connector can carry. Wire size (28 AWG) describes the conductor gauge of the attached lead; thinner gauges like this are best for signals and modest currents, not heavy loads. Gender (female) means the housing accepts male pins or a mating male header. The 300mm lead length gives useful reach inside small enclosures while keeping wiring tidy.

Compatibility and Requirements

This connector is designed for 2.00mm-pitch mating systems and should be paired with a compatible male header or receptacle of the same pitch and pin count. The supplied 28 AWG wire is intended for low-current use. No voltage or current rating is stated in the product data, so check your own circuit requirements against the wire gauge before use. The free end of the wire is unterminated and will need stripping and soldering, or another suitable termination, for your application.

Typical Uses

Common applications include linking small circuit boards and modules, building compact wiring harnesses for RC models and drones, connecting sensors or low-power peripherals, and general DIY electronics and repair work where a short five-way lead is handy.

What's in the Box

One PA-05Y 2.00mm 5-pin female housing connector with a 300mm 28 AWG wire attached.

Quick specs

Manufacturer
ZGWD
Pitch Spacing (mm)
2
No. of Pins
5
Gender
Female
Allowed Wire Size (AWG)
28
Shipping Weight
0.001 kg
See all specifications