
1 / 3 · Click to enlarge
AI Summary
A 30-pin flat flexible cable with 0.5mm pitch and 200mm length, rated to 60VDC. Stiffened ends make it easier to seat in matching FPC connectors inside compact devices.
Key Highlights
- 30 conductors on a fine 0.5mm pitch for dense layouts
- 200mm length gives useful reach inside small enclosures
- Stiffened ends ease insertion and add strain relief
- Rated for 60VDC operation
- Slim 15.5mm width and roughly 1g per cable
- White and blue flat flexible construction
Ideal For
- Repair technicians replacing internal display or camera cables
- Makers connecting peripherals to Raspberry Pi ribbon connectors
- Electronics assemblers working with fine-pitch FPC connectors
- Hobbyists building compact devices with tight internal routing
Buying Tip
Count the pins and measure the contact pitch on your existing connector before ordering, and confirm the A-Type contact orientation matches your board.
Elecvora expert review
Our verdict
A practical, low-cost replacement cable for fine-pitch internal links where space is limited. The stiffened ends make fitting noticeably easier than with plain ribbon cable.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Fine 0.5mm pitch suits dense boards
- Stiffened ends aid insertion and strain relief
- Light and flexible for tight routing
- 60VDC rating covers typical low-voltage use
Cons
- Requires a matching 30-pin 0.5mm connector
- Cannot be shortened or re-terminated easily
- Contact orientation must be checked before fitting
Best for
Repair and assembly work inside compact electronics
Not ideal for
Mains-voltage or high-power wiring
Specifications
| Cable Type | Flat Flexible |
|---|---|
| No. of Pins | 30 |
| Rated Voltage (VDC) | 60 |
| Pitch (mm) | 0.5 |
| Cable Length | 200 |
| Length (mm) | 200 |
| Width (mm) | 15.5 |
| Weight (g) | 1 (approx) (each) |
| Color | White - Blue |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 5 × 3 × 1 cm |
What's in the box
- 1 x 0.5mm Pitch 30 pin 200mm FPC A-Type Ribbon Flexible Flat Cable
Frequently Asked Questions
What connector does this cable fit?
What does A-Type mean here?
What voltage can it handle?
Is a connector included?
How should I store or handle it?
Can I cut it to a shorter length?
Overview
This flat flexible cable carries 30 conductors at a 0.5mm pitch across a 200mm length. Its thin, ribbon-style body is designed for tight internal spaces where round wire bundles would be too bulky. Both ends are reinforced with a stiffener, which makes the cable slightly thicker at the tips so it can be pushed into a matching connector more reliably and held with a little extra strain relief.
Key Features
- 30-pin flat flexible construction with 0.5mm contact pitch
- 200mm overall length and about 15.5mm width
- Stiffened ends for easier insertion and strain relief
- 60VDC rated voltage
- Lightweight at roughly 1g per cable
- White and blue finish for easy identification
Specifications Explained
Pitch and pin count
The 0.5mm pitch describes the centre-to-centre spacing between adjacent conductors. With 30 pins, the cable is intended for fine-pitch FPC connectors, so the connector on your board must match both the 0.5mm pitch and the 30-contact count.
Length and width
At 200mm long and about 15.5mm wide, the cable offers a moderate reach for internal routing while staying narrow enough to pass through small openings. Confirm that the length suits your layout before fitting, since excess cable can be folded but not shortened easily.
Voltage rating
The 60VDC rating covers low-voltage signal and power links typically found inside consumer electronics. It is not intended for mains or high-energy circuits.
A-Type construction
The A-Type designation refers to the contact orientation at the ends. Check the contact direction on your connector and board before ordering so the cable seats correctly.
Compatibility and Requirements
This cable requires a mating 30-pin, 0.5mm pitch FPC connector. It is commonly associated with Raspberry Pi ribbon connectors when linking a peripheral such as an external display, camera or breakout board, but always verify pin count, pitch and contact orientation against your own hardware. No adapter or connector is supplied.
Typical Uses
- Displays and flat-screen assemblies
- Computers and laptops
- Printers, scanners, fax machines and copiers
- Digital cameras and car DVD players
- Audio equipment and inkjet printers
What's in the Box
One 0.5mm pitch 30-pin 200mm FPC A-Type ribbon flexible flat cable.
Quick specs
- Cable Type
- Flat Flexible
- No. of Pins
- 30
- Rated Voltage (VDC)
- 60
- Pitch (mm)
- 0.5
- Cable Length
- 200
- Length (mm)
- 200













