Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This battery protection board is a good fit for makers, students and electronics hobbyists. Main specs: item type Charge and Discharge Board; charge current range (a) 2.4A ± 5%; output voltage 5V ~ 5.15V. Check that your power source supplies 5V ~ 5.15V before connecting it.

Key Highlights

  • Item Type: Charge and Discharge Board
  • Charge Current Range (A): 2.4A ± 5%
  • Output Voltage: 5V ~ 5.15V

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeCharge and Discharge Board
Charge Current Range (A)2.4A ± 5%
Output Voltage5V ~ 5.15V
Output Ripple100mV(Boost)
Output Current (A)2(Boost)
Conversion efficiency92.5% @ 3.6V input, 5V 2A output(Boost)
Quiescent Current30 μA
Life Cycle>500 charges
Battery Capacity(C)2000mAh
Length (mm)53
Width (mm)9.
Weight (g)03
Shipping Weight0.005 kg
Shipping Dimensions6 × 2 × 2 cm

Overview

The 1 lithium battery pack 5V charge and discharge board is listed in our battery protection board range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Charge and Discharge Board
  • Charge Current Range (A): 2.4A ± 5% (quoted range is usually line-of-sight; walls and interference shorten it)
  • Output Voltage: 5V ~ 5.15V (match this to your power supply; too high a voltage can damage the part)
  • Output Ripple: 100mV(Boost)
  • Output Current (A): 2(Boost) (your supply must deliver at least this much current)
  • Conversion efficiency: 92.5% @ 3.6V input, 5V 2A output(Boost)
  • Quiescent Current: 30 μA (your supply must deliver at least this much current)
  • Life Cycle: >500 charges

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This advanced 1 lithium battery pack charge and discharge board offers a reliable and efficient power solution for your DIY electronics. Designed to support 5V input and output, it features a robust charging current of 2.4A and a stable 5V boost output up to 2A, making it ideal for low-power devices under 10W. With built-in overcharge and discharge protection, this board ensures the safety and longevity of your batteries. Its high conversion efficiency (92.5%) and ultra-low quiescent current (<30uA) make it both energy-saving and durable. Perfect for powering electronic locks, toys, and portable gadgets with ease and confidence.


Features:

  1. Fast charging with 2.4A current support
  2. 5V regulated boost output with up to 2A current
  3. Overcharge and over-discharge protection
  4. High efficiency with 92.5% boost conversion
  5. Supports over 500 charge/discharge cycles
  6. Compatible with devices under 10W power

Package Includes:

1 x 1 lithium battery pack 5V charge and discharge board

Quick specs

Item Type
Charge and Discharge Board
Charge Current Range (A)
2.4A ± 5%
Output Voltage
5V ~ 5.15V
Output Ripple
100mV(Boost)
Output Current (A)
2(Boost)
Conversion efficiency
92.5% @ 3.6V input, 5V 2A output(Boost)
See all specifications