
1 / 3 · Click to enlarge
AI Summary
A 10 x 15 cm single-sided FR4 prototype board with a standard 2.54mm hole grid for building through-hole circuits. Its rigid 1.6mm thickness and universal layout make hand-soldered projects easier to plan and assemble.
Key Highlights
- 10 x 15 cm single-sided FR4 prototype board
- Standard 2.54mm hole pitch for through-hole parts
- 1.6mm board thickness for a rigid soldering base
- Copper thickness from 1 to 4 oz
- Lightweight at approximately 110 g
- Blank universal grid ready for custom layouts
Ideal For
- Electronics hobbyists building through-hole circuits
- Students learning soldering and circuit layout
- Engineers creating one-off prototypes
- Makers assembling custom control boards
- Technicians repairing or replicating through-hole designs
Buying Tip
Confirm that your components use a 2.54mm pitch and plan your wiring on the single copper side before soldering.
Elecvora expert review
Our verdict
A practical, no-frills prototype board that gives you a large single-sided FR4 surface for through-hole builds. It is best suited to makers who are comfortable planning their own wiring and soldering every connection.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Generous 10 x 15 cm working area
- Standard 2.54mm pitch fits common through-hole parts
- Rigid 1.6mm FR4 base stays flat during soldering
- Lightweight and easy to mount
Cons
- Single-sided layout requires careful planning
- No mounting holes or headers are included
- Requires soldering tools and separate components
Best for
Hand-soldered through-hole prototypes and custom layouts
Not ideal for
High-density or surface-mount designs that need fine-pitch pads
Specifications
| Item Type | PCB Prototype Board |
|---|---|
| Dimensions (LxWxH) cm | 10 x 15 |
| Base Material | FR4 |
| Min. Hole Size (mm) | 2.54 |
| Length (mm) | 100 |
| Width (mm) | 150 |
| Additional Specs. | Board Thickness: 1.6, Copper Thickness (mm): 1-4 oz |
| Weight (g) | 110 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
Frequently Asked Questions
What is the hole pitch on this prototype board?
Is this board single-sided or double-sided?
What components can I use with this board?
Does the board come with any headers or terminals?
How thick is the board?
What is the copper thickness?
Overview
This universal PCB prototype board is a blank, single-sided FR4 board designed for building and testing through-hole electronic circuits. At 10 x 15 cm, it provides a generous working area for component placement and point-to-point wiring. The board uses a standard 2.54mm hole pitch, so common through-hole parts such as resistors, capacitors, headers, and DIP integrated circuits fit the grid without modification.
Key Features
- Single-sided FR4 base: a rigid, widely used board material for prototyping and soldering.
- Standard 2.54mm hole pitch: matches the lead spacing of many through-hole components and headers.
- 1.6mm board thickness: gives the board enough stiffness to stay flat during soldering and handling.
- Copper thickness of 1 to 4 oz: provides a conductive layer for your wiring and solder joints.
- Lightweight construction: approximately 110 g, easy to mount or carry between work areas.
Specifications Explained
The 10 x 15 cm dimensions refer to the board length and width, giving you a large canvas for multi-component builds. The 2.54mm hole pitch is the centre-to-centre distance between adjacent holes, which is the de facto standard for through-hole prototyping and matches the pin spacing of many headers and DIP packages. A board thickness of 1.6mm is a common rigid PCB thickness, so the board resists flexing when you insert components or apply solder. The copper thickness range of 1 to 4 oz describes the weight of the copper layer per square foot; this range covers typical prototype board constructions and supports normal soldering and low-current wiring. At roughly 110 g, the board is light enough to be fixed to a panel or enclosure without adding significant weight.
Compatibility and Requirements
This board is intended for through-hole components with a 2.54mm pitch. It is a bare prototype board, so you will need your own components, wire, and soldering tools to build a circuit. Because it is single-sided, plan your layout so that connections remain on the copper side and any component legs are soldered on the opposite side. No additional headers, terminals, or mounting hardware are included unless stated in the package contents.
Typical Uses
Use this board for hand-built circuits, educational electronics projects, sensor and interface prototypes, and permanent installations where a custom layout is needed. It is also useful for repairing or replicating a circuit that uses through-hole parts, or for creating a one-off control board inside an enclosure.
What's in the Box
Package contents are not specified for this listing. Please check the product packaging or contact the seller for details on what is included.
Quick specs
- Item Type
- PCB Prototype Board
- Dimensions (LxWxH) cm
- 10 x 15
- Base Material
- FR4
- Min. Hole Size (mm)
- 2.54
- Length (mm)
- 100
- Width (mm)
- 150













