Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 20 x 30 cm single-side copper clad PCB with 1.5 mm thick glass fiber epoxy substrate and copper foil on one face. It gives you a durable, insulating base for prototyping and custom circuit layouts.

Key Highlights

  • Single-side copper foil on glass fiber epoxy substrate
  • Large 20 x 30 cm sheet for custom layouts
  • 1.5 mm thick board for mechanical strength
  • Bare reverse side acts as electrical insulation
  • Suitable for etching, drilling and point-to-point wiring
  • Clean surface ready for prototyping work

Ideal For

  • Electronics hobbyists building custom single-sided circuits
  • Students learning PCB etching and hand soldering
  • Workshop technicians prototyping new designs
  • Makers who need a large rigid laminate sheet
  • Repair specialists creating replacement board sections

Buying Tip

Plan how you will cut and drill the board before you start, and wear eye protection when working with glass fiber laminate.

Elecvora expert review

Our verdict

A straightforward, large-format single-side copper clad board that gives you a clean starting point for custom circuits. The 1.5 mm thickness and 20 x 30 cm size make it a practical stock item for any electronics bench.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Generous 20 x 30 cm size for larger layouts
  • Rigid 1.5 mm glass fiber epoxy substrate
  • Single-side copper is easy to etch or hand-wire
  • Bare reverse side provides insulation

Cons

  • No pre-drilled holes or pre-etched traces
  • Requires cutting, drilling and etching tools
  • May show minor surface scratches from cleaning

Best for

Hobbyists and technicians who build custom single-sided circuits

Not ideal for

Users who need a ready-to-use pre-drilled prototyping board

Specifications

Item TypePCB
Dimensions (LxWxH) cm20 x 30
Additional Specs.Copper
Length (cm)30cm
Width (cm)20cm
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x Single-Side Copper Clad Laminate PCB, 20 x 30 cm, 1.5 mm thick

Frequently Asked Questions

Is this board pre-drilled or pre-etched?
No. It is a bare copper clad laminate with no holes or circuit pattern, so you drill and etch it yourself.
What tools do I need to work with this PCB?
You will need a drill for holes, a saw or cutter for resizing, and etching or wiring materials depending on your design.
Can I cut the board to a smaller size?
Yes. The laminate can be scored, sawn or cut to smaller sections, then the edges filed smooth.
Does the board come with any components or accessories?
No. The package contains only the single-side copper clad laminate PCB.
How should I store and clean the board?
Keep it dry and flat to avoid oxidation and warping. Clean the copper with a mild abrasive before soldering or etching.
Why might the board have scratches?
The PCB is cleaned before shipping, which can leave minor surface marks. These do not affect its use for prototyping.

Overview

This single-side copper clad printed circuit board is a raw laminate made from glass fiber epoxy resin with copper foil bonded to one side only. The opposite face stays bare, so the substrate provides electrical insulation while the copper layer gives you a conductive surface. At 20 x 30 cm and 1.5 mm thick, the sheet offers generous space for custom layouts and enough rigidity for repeated handling during prototyping.

Because the board arrives without drilled holes or a pre-etched pattern, you decide the final circuit. You can cut it to size, drill component holes, etch traces or use it as a ground plane for point-to-point builds.

Key Features

  • Single-side copper foil: conductive layer on one face, bare insulating substrate on the other.
  • Glass fiber epoxy base: provides mechanical strength and electrical insulation.
  • 20 x 30 cm working area: room for larger circuits or multiple small projects.
  • 1.5 mm thickness: a sturdy board that resists flexing during drilling and soldering.
  • Ready for custom work: suitable for cutting, drilling, etching and hand wiring.

Specifications Explained

Dimensions

The board measures 20 cm wide by 30 cm long. That is a large format for a single laminate, useful when your layout needs more space than a standard small prototyping board. You can score or cut it down to smaller sections as needed.

Thickness

At 1.5 mm, the laminate sits in a practical middle ground: thick enough to stay flat and rigid on the bench, yet manageable with hand tools. It holds drilled holes well and tolerates normal soldering heat.

Copper Cladding

Copper foil covers one side only. That single conductive layer is enough for many through-hole and point-to-point designs, and it leaves the reverse side free as an insulating surface. The copper also adds strength to the laminate.

Compatibility and Requirements

This is a bare laminate, not a pre-built module, so it has no voltage or current rating of its own. Compatibility depends on your circuit design and the tools you use. You will need standard electronics tools such as a drill for component holes, a saw or cutter for resizing, and appropriate etchant or hand-wiring materials if you plan to form traces. No additional hardware is supplied with the board.

Typical Uses

  • Prototyping and experimenting with new circuit ideas.
  • Building custom single-sided boards for workshop or lab projects.
  • Point-to-point wiring and ground-plane work.
  • Educational electronics exercises and soldering practice.
  • Repair and replacement work where a custom board section is needed.

What's in the Box

One single-side copper clad laminate PCB, 20 x 30 cm, 1.5 mm thick.

Quick specs

Item Type
PCB
Dimensions (LxWxH) cm
20 x 30
Additional Specs.
Copper
Length (cm)
30cm
Width (cm)
20cm
Shipping Weight
0.001 kg
See all specifications