Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A single-sided copper clad laminate measuring 10 x 15 cm with a 1.5 mm glass fibre epoxy base. It gives you a rigid, insulated board with copper foil on one face for etching and building your own prototype circuits.

Key Highlights

  • Single-sided copper foil on a rigid glass fibre epoxy base
  • 10 x 15 cm panel size offers room for larger layouts
  • 1.5 mm board thickness for stiffness during handling
  • Bare reverse face acts as the insulating side
  • Suitable for etching, drilling and hand-built prototypes
  • Lightweight panel that is easy to store and cut

Ideal For

  • Hobbyists etching their own single-sided circuit boards
  • Electronics students learning PCB fabrication
  • Makers building one-off prototypes
  • Technicians doing repair and small fabrication jobs
  • Classroom and workshop electronics projects

Buying Tip

Check your layout fits within 10 x 15 cm before cutting, because trimming the panel is permanent.

Elecvora expert review

Our verdict

A dependable raw material for anyone who wants to make single-sided boards by hand. The 1.5 mm glass fibre epoxy base and 10 x 15 cm area give enough room and rigidity for real prototype work.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Rigid 1.5 mm glass fibre epoxy base
  • Generous 10 x 15 cm working area
  • Single-sided foil simplifies etching
  • Cuts down to smaller boards easily

Cons

  • Bare laminate only, no components or instructions included
  • Light surface scratches may be present
  • Requires separate etchant, resist and drilling tools

Best for

Hobbyists and students etching custom single-sided boards

Not ideal for

Buyers wanting a ready-made populated circuit board

Specifications

Item TypePCB
Dimensions (LxWxH) cm10 x 15
Dimensions (L x W x H) mm100 X 150
Thickness (mm)1.5mm
FoilCopper
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x Single-Side Copper Clad PCB Laminate, 10 x 15 cm, 1.5 mm

Frequently Asked Questions

Is copper foil on both sides?
No. Copper foil is bonded to one face only; the reverse side is bare substrate.
What are the exact dimensions?
The panel is 10 x 15 cm, or 100 x 150 mm, with a thickness of 1.5 mm.
Can I cut it to a smaller size?
Yes, the laminate can be trimmed to smaller boards, though the cut is permanent, so plan first.
Does it come with components or instructions?
No. The package contains one bare copper clad laminate only.
What tools do I need to use it?
You need your own etch resist, etchant and a drill for component holes; none are supplied.
Why might the board arrive with scratches?
Panels are cleaned before shipping, which can leave light surface marks; these do not affect use.

Overview

This copper clad laminate is a raw board material for building circuits yourself. It consists of a glass fibre epoxy substrate with copper foil bonded to one side only; the opposite face remains bare. The copper layer carries your traces and pads, while the substrate separates them electrically from anything underneath.

The panel measures 10 x 15 cm (100 x 150 mm) and is 1.5 mm thick, giving a rigid sheet that holds its shape while you draw, mask, etch and drill.

Key Features

  • Single-sided copper foil, so layouts stay simple to plan and etch
  • Glass fibre epoxy substrate for mechanical strength and insulation
  • 10 x 15 cm working area suits multi-stage prototypes
  • 1.5 mm thickness resists flexing during soldering
  • Can be cut down to smaller boards as needed

Specifications Explained

Board size

At 10 x 15 cm, the panel gives enough space for a complete small circuit or several smaller sections cut from one sheet. Plan your layout before cutting, since the size is fixed once trimmed.

Thickness

A 1.5 mm board sits in a practical middle ground: stiff enough to stay flat on the bench, yet thin enough to drill and cut with common hand tools.

Copper foil on one side

Having foil on a single face keeps etching and isolation straightforward. Components mount on the copper side, and the bare side faces away from the circuit.

Compatibility and Requirements

This is a bare laminate, not a finished board. You will need your own etch resist, developer and etchant, plus a drill for component holes. No components, connectors or instructions are supplied with the panel.

Typical Uses

  • Etching custom single-sided circuit boards at home
  • Student and classroom electronics projects
  • Rapid one-off prototypes before a final design
  • Experimenting with track layouts and copper removal
  • General repair and hobby fabrication work

What's in the Box

One single-sided copper clad laminate PCB. Note that panels may show light scratches from cleaning before dispatch, and dimensions can vary slightly from photos.

Quick specs

Item Type
PCB
Dimensions (LxWxH) cm
10 x 15
Dimensions (L x W x H) mm
100 X 150
Thickness (mm)
1.5mm
Foil
Copper
Shipping Weight
0.001 kg
See all specifications