
1 / 3 · Click to enlarge
AI Summary
A 7x9cm single-sided FR4 prototype board with 2.54mm pitch and 1mm holes. It offers a standard, durable platform for soldering and testing through-hole circuits.
Key Highlights
- 7 x 9 cm board size with 2.54mm standard hole pitch
- Single-sided FR4 base material with 1.6mm thickness
- 1mm hole diameter for through-hole components
- Copper thickness of 1-4 oz for reliable solder joints
- Pre-drilled holes for quick component placement
- Lightweight at 35g, easy to integrate into projects
Ideal For
- Electronics hobbyists building custom circuits
- Students learning soldering and prototyping
- Engineers testing new designs
- Makers creating one-off projects
- DIY enthusiasts repairing electronics
Buying Tip
Check that your components have leads thinner than 1mm and that you have a soldering iron suitable for PCB work.
Elecvora expert review
Our verdict
This prototype board offers a reliable and standard platform for through-hole projects, with quality FR4 material and precise hole spacing. It is a solid choice for anyone needing a no-frills board for soldering and testing.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Standard 2.54mm pitch fits most components
- Durable FR4 construction with 1.6mm thickness
- Pre-drilled 1mm holes for easy insertion
- Generous 7x9cm size for complex circuits
- Lightweight and easy to handle
Cons
- Single-sided design limits routing options
- No mounting holes or predefined traces
- Requires soldering skills and tools
Best for
Through-hole prototyping and educational projects
Not ideal for
High-density or surface-mount designs
Specifications
| Item Type | PCB Prototype Board |
|---|---|
| Dimensions (LxWxH) cm | 7 X 9 |
| Pitch (mm) | 2.54 |
| Hole diameter(mm) | 1 |
| Base Material | FR4 |
| Length (mm) | 70 |
| Width (mm) | 90 |
| Additional Specs. | Board Thickness: 1.6, Copper Thickness (mm): 1-4 oz |
| Weight (g) | 35 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x Universal 7 x 9 cm PCB Prototype Board Single-Sided 2.54mm Hole Pitch
Frequently Asked Questions
What is the hole spacing on this board?
Can I use this board with surface-mount components?
Does the board come with any traces or is it bare?
What is the maximum component lead diameter that fits?
Is the board pre-tinned?
How should I clean the board after soldering?
Overview
This universal PCB prototype board is a practical solution for building and testing electronic circuits. Measuring 7 x 9 cm, it provides ample space for a variety of components while maintaining a compact footprint. The board is constructed from FR4, a widely used and reliable base material, and features a single-sided copper layer. With a standard 2.54mm hole pitch and 1mm hole diameter, it accommodates common through-hole parts such as resistors, capacitors, headers, and DIP ICs. Whether you are prototyping a new design or repairing an existing circuit, this board offers a sturdy and convenient platform.
Key Features
- Standard 2.54mm pitch: Aligns with most through-hole components and headers for easy insertion.
- Durable FR4 construction: Provides mechanical strength and resistance to warping during soldering.
- Single-sided copper: Simplifies soldering and is ideal for straightforward circuit layouts.
- 1.6mm board thickness: Offers rigidity while remaining easy to cut or drill if needed.
- 1-4 oz copper thickness: Supports reliable solder joints and good conductivity.
- Pre-drilled 1mm holes: Ready for component leads and wire connections.
Specifications Explained
The 7 x 9 cm dimensions give you a generous work area without taking up too much space on a bench or inside an enclosure. The 2.54mm pitch is the de facto standard for through-hole components, meaning most headers, IC sockets, and discrete components will fit perfectly. A 1mm hole diameter is large enough for typical component leads but small enough to hold them in place during soldering. The FR4 base material is a flame-retardant glass-reinforced epoxy, known for its dimensional stability and durability. With a thickness of 1.6mm, the board is rigid enough to withstand handling and soldering heat. The copper thickness of 1-4 oz ensures that traces and pads can handle moderate currents and that solder adheres well.
Compatibility and Requirements
This board is compatible with standard through-hole components with lead diameters up to approximately 0.8mm (since the hole is 1mm). It works with common soldering tools and materials, including lead-free and leaded solder. No special adapters are required for standard 2.54mm pitch parts. Note that the board is single-sided, so components should be placed on the non-copper side and soldered on the copper side. The board does not come with mounting holes or predefined traces, so you will need to create your own connections using wires or solder bridges.
Typical Uses
- Building permanent prototypes of electronic circuits
- Educational projects and learning soldering
- DIY audio, power, and control circuits
- Repairing or modifying existing equipment
- Small-scale production of custom boards
What's in the Box
Package includes: 1 x Universal 7 x 9 cm PCB Prototype Board Single-Sided 2.54mm Hole Pitch.
Quick specs
- Item Type
- PCB Prototype Board
- Dimensions (LxWxH) cm
- 7 X 9
- Pitch (mm)
- 2.54
- Hole diameter(mm)
- 1
- Base Material
- FR4
- Length (mm)
- 70















