Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This 140-piece kit provides pre-formed U-shape jumper wires in 14 lengths and 8 colors for solderless breadboards. The 22 AWG wires are ready to use, keeping your circuits neat and saving time on stripping and cutting.

Key Highlights

  • 140 pre-formed U-shape jumper wires for solderless breadboards
  • 14 different lengths from 2 mm to 125 mm for flexible layouts
  • 8 colors to help organize and trace connections
  • 22 AWG wire suitable for standard breadboard holes
  • Saves time by eliminating cutting and stripping
  • Compact storage box keeps wires organized

Ideal For

  • Electronics hobbyists building breadboard prototypes
  • Students learning circuit design
  • Engineers testing new ideas quickly
  • Makers organizing complex breadboard layouts
  • Educators teaching electronics fundamentals

Buying Tip

Check that your breadboard accepts 22 AWG wire and that the U-shape width fits your row spacing; the 60 mm width is standard for most boards.

Elecvora expert review

Our verdict

This jumper wire kit is a practical and affordable solution for anyone who frequently prototypes on breadboards. The pre-formed U-shape and wide range of lengths save time and keep circuits neat, though the lack of a case might be a minor drawback for some.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Saves time with pre-stripped, pre-formed wires
  • Wide variety of lengths for different connections
  • Color-coded for easy circuit tracing
  • Fits standard breadboards securely

Cons

  • Colors may vary from the image depending on the box shipped
  • No detailed specifications on wire material or temperature rating

Best for

Breadboard prototyping and electronics education

Not ideal for

Permanent soldered connections or high-current applications

Specifications

Wire Size (AWG)22
Length (mm)160
Width (mm)60
Weight (g)52
Shipping Weight0.057 kg
Shipping Dimensions15 × 7 × 3 cm

What's in the box

  • 1 x 140 pcs U Shape Solderless Breadboard Jumper Cable Wire Kit

Frequently Asked Questions

Can these wires be used with any breadboard?
They are designed for standard solderless breadboards that accept 22 AWG wire. Most common breadboards will work, but check the hole size if you have a non-standard board.
Do I need to strip the wires before use?
No, the wires come pre-stripped and pre-formed, ready to plug into a breadboard.
What is the maximum voltage or current these wires can handle?
The product data does not specify voltage or current ratings. For safety, use them only with low-power circuits typical of breadboard prototyping.
Are the colors exactly as shown in the image?
The colors may differ depending on the box shipped, but you will receive 8 different colors for organization.
How many wires of each length are included?
There are 10 wires of each of the 14 lengths, totaling 140 wires.
Can I reuse these jumper wires?
Yes, they are reusable as long as the ends are not damaged. Store them properly to maintain their shape.

Overview

The 140 pcs U Shape Solderless Breadboard Jumper Cable Wire Kit is a comprehensive set of pre-formed jumper wires designed for solderless breadboard prototyping. Each wire is bent into a U shape with stripped ends, ready to plug into standard breadboard holes. The kit includes 140 wires in 14 different lengths and 8 colors, allowing you to create neat and organized circuits without the hassle of cutting and stripping wires. Whether you are a beginner learning electronics or an experienced engineer testing a design, this kit helps you work faster and keep your breadboard tidy.

Key Features

  • 140 pieces, 14 lengths: Ten wires of each length from 2 mm to 125 mm, covering short jumps and longer connections.
  • 8 colors: Color-coded wires make it easy to identify power, ground, and signal lines.
  • 22 AWG wire: A common gauge that fits securely in standard solderless breadboards.
  • Pre-stripped and pre-formed: No tools needed; just plug and play.
  • Compact storage: The kit comes in a box that keeps wires sorted by length and color.

Specifications Explained

Wire size (22 AWG): This gauge is widely used for breadboard prototyping because it is thick enough to carry typical signal and low-power currents yet thin enough to fit easily into breadboard holes. Length range (2 mm to 125 mm): The shortest wires are ideal for adjacent pins, while the longest can span across multiple components. Width (60 mm): The U shape has a standard width that fits common breadboard row spacing. Weight (52 g): Lightweight and portable, making it easy to carry in a tool bag. Shipping dimensions (15 × 7 × 3 cm): Compact packaging that fits through a letterbox or small parcel slot.

Compatibility and Requirements

These jumper wires are designed for use with standard solderless breadboards that accept 22 AWG wire. They require no additional tools or power source; simply insert the stripped ends into breadboard holes. The wires are compatible with through-hole components and other breadboard-compatible modules. No soldering is required.

Typical Uses

Use this kit for prototyping circuits on a breadboard, testing new electronic designs, teaching electronics principles, or building temporary connections. The various lengths and colors are helpful for organizing complex circuits, such as microcontroller projects, sensor interfacing, and logic gates. It is also a convenient spare set for repair and maintenance of existing breadboard setups.

What's in the Box

1 x 140 pcs U Shape Solderless Breadboard Jumper Cable Wire Kit (14 lengths, 10 pieces each, 8 colors).

Quick specs

Wire Size (AWG)
22
Length (mm)
160
Width (mm)
60
Weight (g)
52
Shipping Weight
0.057 kg
Shipping Dimensions
15 × 7 × 3 cm
See all specifications