
1 / 6 · Click to enlarge
AI Summary
A 68mm circular board with 16 individually addressable WS2812B RGB LEDs and a 54mm centre opening. Each LED has a built-in driver, so a single data line controls the whole ring from a 5V supply.
Key Highlights
- 16 WS2812B 5050 RGB LEDs on a circular PCB
- 68mm outer diameter with 54mm inner opening
- Individually addressable pixels via single-wire control
- 5V supply with built-in constant current drive
- Cascadable DI-DO ports for chaining boards
- 256 brightness levels per colour channel
Ideal For
- Electronics hobbyists building custom lighting effects
- Makers designing circular indicators and gauges
- Students learning addressable LED control
- Model makers adding small RGB light rings
- DIY enthusiasts creating wearable or prop lighting
Buying Tip
Check that your project can supply a stable 5V source and that you have a microcontroller library compatible with WS2812B before soldering the data and power wires.
Elecvora expert review
Our verdict
A compact, ready-made addressable LED ring that simplifies wiring thanks to integrated drivers and single-wire control. It is a solid choice for small circular lighting projects where space is limited.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Individually addressable LEDs with built-in drivers
- Single-wire control saves microcontroller pins
- Constant current drive for uniform colour
- Cascadable design for larger installations
- Compact 68mm ring with 54mm centre opening
Cons
- Requires a 5V power source and microcontroller
- Soldering is needed to connect wires
- No mounting holes or connectors are specified
Best for
Makers and hobbyists building small circular LED effects
Not ideal for
Users who need a pre-wired plug-and-play lighting solution
Specifications
| Item Type | LED Board |
|---|---|
| IC Chip | WS2812B |
| Outer Diameter (mm) | 68 |
| Inner Diameter (mm) | 54 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 7 × 7 × 1 cm |
What's in the box
- 1 x 16Bit WS2812B 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
Frequently Asked Questions
How many LEDs are on the board?
What voltage does the board require?
Can I connect multiple boards together?
Do I need external resistors for the LEDs?
What is included in the package?
How do I control the LEDs?
Overview
The 16Bit WS2812B 5050 RGB LED Circular Development Board is a round black PCB fitted with 16 surface-mount RGB LEDs. Each LED contains its own WS2812B driver chip, which means every pixel can be controlled independently. The board measures 68mm across the outside and has a 54mm inner diameter, leaving a clear centre opening for mounting or cable routing. Data moves through a single-wire interface, and the DI and DO pins allow multiple boards or compatible LED units to be cascaded in a chain.
Key Features
- Integrated driver per LED: each 5050 RGB package includes a control circuit, so no external driver is needed for individual pixel control.
- Single-wire communication: reduces the number of I/O pins required from your microcontroller.
- Constant current drive: each LED has an 18mA constant current driver, which helps keep colour output uniform across the ring.
- Signal reshaping: the built-in reshaping circuit restores the data waveform at each stage to limit distortion as the chain grows.
- Wide colour range: each of the three primary colours offers 256 brightness levels, giving up to 16 million colour combinations.
- Compact format: the 68mm ring with a 54mm centre hole fits into tight enclosures and custom fixtures.
Specifications Explained
WS2812B IC: This is the addressable LED driver inside every 5050 package. It receives serial data and sets the colour and brightness of its own LED, so you can create patterns, gradients and animations across the ring. 16 LEDs: the ring has sixteen pixels arranged in a circle, which is enough for smooth colour sweeps and circular indicators without a large board footprint. 68mm outer / 54mm inner diameter: the 7mm ring width leaves room for the LEDs and traces, while the 54mm opening can accommodate a lens, button or cable pass-through. 5V supply: the board is designed to run from a 5V DC source, which is common in USB-powered and hobby electronics projects. Constant current: the 18mA drive per LED helps maintain consistent brightness and colour even when supply voltage varies slightly. Refresh rate: the scan frequency is not less than 400Hz/s, which is suitable for flicker-free visual effects in most lighting applications.
Compatibility and Requirements
The board requires a 5V power supply and a microcontroller or driver that can send WS2812B-compatible single-wire data. Because the DI and DO pins are exposed, multiple boards can be chained, and the data signal can travel more than 5m between points without additional circuitry. At a 30fps refresh rate, a cascade of at least 1024 pixels is supported. No external current-limiting resistors are needed for the LED ring itself, which simplifies wiring.
Typical Uses
This circular board is suited to decorative lighting, custom gauge clusters, wearable electronics, model making, and indoor or outdoor LED video displays where a small addressable ring is useful. It can also serve as a visual indicator in control panels or as part of an irregular LED screen build.
What's in the Box
1 x 16Bit WS2812B 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board.
Quick specs
- Item Type
- LED Board
- IC Chip
- WS2812B
- Outer Diameter (mm)
- 68
- Inner Diameter (mm)
- 54
- Shipping Weight
- 0.01 kg
- Shipping Dimensions
- 7 × 7 × 1 cm


















