
1 / 3 · Click to enlarge
AI Summary
A 30-pin flexible flat cable with 1mm pitch and 200mm length in A-Type orientation, rated to 60V DC. Its thin, flat profile routes neatly through tight spaces in compact electronics assemblies.
Key Highlights
- 30 conductors on a 1mm pitch for dense board-to-board links
- 200mm length gives useful reach inside small enclosures
- A-Type straight orientation for direct, uncomplicated routing
- Rated 60V DC for low-voltage signal and power connections
- Approximately 1g per cable and 30mm wide for tight layouts
- White and blue finish helps confirm orientation at a glance
Ideal For
- Electronics repair technicians replacing internal ribbon links
- Makers building compact prototypes on the bench
- Hardware hobbyists working with dense board layouts
- Maintenance teams keeping spares for low-voltage equipment
Buying Tip
Measure the gap between your two connectors and confirm the 1mm pitch, 30-pin count and A-Type orientation before ordering, since a flipped or mismatched ribbon will not seat correctly.
Elecvora expert review
Our verdict
A straightforward, lightweight ribbon cable that does one job well: linking 30 contacts at 1mm pitch over a short 200mm run. It is a sensible spare for repair benches, provided buyers match the pitch, pin count and A-Type orientation carefully.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Clear 30-pin, 1mm pitch specification
- Slim 30mm width suits tight internal routing
- A-Type straight orientation simplifies installation
- Very light at about 1g per cable
Cons
- Only fits connectors built to the same 1mm pitch and pin count
- Package contents are not specified, so quantity must be chosen carefully
- Not suitable for higher-voltage work beyond its 60V DC rating
Best for
Compact low-voltage electronics assemblies and repair spares
Not ideal for
High-voltage wiring or connectors with a different pitch or pin count
Specifications
| Cable Type | Flat Flexible |
|---|---|
| Rated Voltage (VDC) | 60 |
| No. of Pins | 30 |
| Pitch (mm) | 1 |
| Cable Length | 200 |
| Length (mm) | 200 |
| Width (mm) | 30 |
| Weight (g) | 1 (approx) (each) |
| Color | White - Blue |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 5 × 3 × 1 cm |
Frequently Asked Questions
What does A-Type mean on this ribbon cable?
How many pins does this cable have?
What voltage is it rated for?
How long and wide is the cable?
What is included with the cable?
How should I care for the cable?
Overview
This flexible flat cable carries 30 conductors on a 1mm pitch across a 200mm length. It is an A-Type ribbon, meaning the contacts run straight through rather than being flipped, so it suits layouts where both ends sit in the same orientation. The cable is 30mm wide and weighs about 1g, which keeps it light and easy to fold into narrow gaps.
Because the conductors are flat and parallel, the cable holds a low profile compared with bundled round wires. That makes it a practical choice for compact electronics where space behind a board or around a display is limited.
Key Features
- 30 pins at 1mm pitch: a dense contact count in a slim ribbon format.
- 200mm length: enough reach for short internal runs without excess slack.
- A-Type orientation: straight-through contact layout for simple routing.
- 60V DC rating: intended for low-voltage signal and power paths.
- Light and narrow: roughly 1g per cable and 30mm wide.
- White and blue finish: makes it easy to spot and orient during assembly.
Specifications Explained
Pitch is the centre-to-centre spacing between adjacent conductors. At 1mm, the 30 contacts sit close together, so the cable fits connectors designed for that spacing. Always match the pitch and pin count to your connector before ordering.
Length is given as 200mm, which is the practical reach of the cable. Check the distance between your two connection points and allow a little slack for folding or bending.
Width of 30mm covers the full ribbon, so confirm there is clear space along the route. The 60V DC rating reflects the cable's intended low-voltage use; it is not a mains-voltage product.
Compatibility and Requirements
This cable is defined by its 30-pin count, 1mm pitch and A-Type orientation. It fits only mating connectors built to those same figures. The product data does not specify a particular device, board or connector series, so verify your connector's pitch, pin count and contact orientation before purchase. No tools, adapters or accessories are included with the cable.
Typical Uses
It is suited to internal wiring in compact electronic assemblies, bench prototyping, and replacement of a damaged or undersized ribbon during repair work. Technicians and makers often keep a few lengths on hand for jobs where a short, flat interconnect is easier to route than discrete wires.
What's in the Box
Package contents are not specified in the product data. Order the quantity you need for your build or repair.

Quick specs
- Cable Type
- Flat Flexible
- Rated Voltage (VDC)
- 60
- No. of Pins
- 30
- Pitch (mm)
- 1
- Cable Length
- 200
- Length (mm)
- 200













