
1 / 4 · Click to enlarge
AI Summary
A 40g, 14-pole brushless gimbal motor wound to 80KV for stabilising 100-200g camera payloads. It arrives with a 20cm servo-style connector for direct hookup to a gimbal controller.
Key Highlights
- 80KV winding tuned for smooth gimbal-axis rotation
- 14 poles for fine, low-cogging motion control
- Rated for camera payloads between 100 and 200 grams
- Compact 28mm diameter and 40g motor weight
- 20cm cable with servo-style Futaba/JR connector
- Preloaded bearings for a slop-free precision mount
Ideal For
- Builders assembling a lightweight GoPro-class camera gimbal
- Makers replacing a worn 2208-size gimbal motor
- FPV pilots adding a stabilised camera mount
- DIY camera rig builders working with 100-200g payloads
Buying Tip
Confirm your gimbal controller accepts a servo-style Futaba/JR connector and that your camera falls within the 100-200g load range before ordering.
Elecvora expert review
Our verdict
A sensible, no-fuss motor for small camera gimbals where smoothness and low weight matter more than torque. The 14-pole layout and pre-fitted connector make it easy to integrate into a lightweight build.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 14-pole design supports smooth, fine motion
- Servo-style connector simplifies wiring
- Light 40g body suits small gimbals
- Preloaded bearings reduce mount play
- Rated load range matches GoPro-class cameras
Cons
- No controller or frame included
- Load capacity limits it to lightweight cameras
- Only a 20cm cable, which may be short for some layouts
Best for
Lightweight GoPro-class camera gimbals
Not ideal for
Heavy camera payloads above 200g
Specifications
| Item Type | Brushless Gimbal Motor |
|---|---|
| Model No. / Name | 2208 |
| Connector Type | Servo(Futaba/JR) |
| Cable Length | 20 |
| Load Capacity (gm) | 100 ~ 200 |
| Poles | 14 |
| Length (mm) | 28 |
| Width (mm) | 28 |
| Weight (g) | 40 |
| Shipping Weight | 0.043 kg |
| Shipping Dimensions | 3.5 × 3.5 × 3.5 cm |
What's in the box
- 1 x 2208 80KV Gimbal Brushless Motor
- 3 x Socket Head Cap (Allen) Bolts
Frequently Asked Questions
What camera weight is this motor designed for?
What connector does the motor use?
Does the package include a gimbal controller?
How many poles does the motor have?
What are the motor dimensions and weight?
How should I care for the motor?
Overview
The 2208 80KV Gimbal Brushless Motor is a small, purpose-built motor for camera stabilisation. It is wound to 80KV and uses a 14-pole layout, a combination intended to give smooth, controllable movement on a gimbal axis rather than raw speed. At 28mm across and 40g in weight, it keeps the moving assembly light, which matters when the camera itself is only in the 100-200g class.
The motor comes with a 20cm cable terminated in a servo-style Futaba/JR connector, so it can be plugged into a compatible gimbal controller without building a custom lead. Preloaded bearings are fitted to reduce play at the mount. This is a single motor for builders assembling or repairing a lightweight gimbal.
Key Features
- 80KV winding: low-speed, high-torque behaviour suited to gimbal axes.
- 14 poles: a high pole count for this size, supporting smooth motion.
- 100-200g load capacity: matched to GoPro-class camera weights.
- Servo-style connector: Futaba/JR type for direct controller hookup.
- 20cm cable: enough length for typical gimbal routing.
- Compact body: 28mm diameter, 28mm length, 40g weight.
Specifications Explained
KV rating: 80KV describes how the motor turns per volt applied. A low KV figure means slower rotation for a given voltage, which is what a gimbal needs to make small, precise corrections instead of fast spins.
Pole count: 14 poles is a relatively high count for a motor of this size. More poles generally means finer control steps and smoother motion, which helps reduce visible jitter in footage.
Load capacity: the 100-200g range tells you the camera weight the motor is intended to balance. Staying inside that window keeps the motor within its design envelope.
Dimensions and weight: 28mm diameter, 28mm length and 40g are the numbers to check against your gimbal frame and overall weight budget.
Compatibility and Requirements
The motor uses a servo-style Futaba/JR connector, so it pairs with gimbal controllers that accept that plug type. It is intended for camera payloads of 100-200g. A gimbal controller and a suitable frame are required to complete a working stabilised system; these are not included. Check that your controller supports this motor type and that your frame accepts a 28mm motor.
Typical Uses
This motor is typically used on the roll, tilt or pan axis of a lightweight camera gimbal, especially where a GoPro-class camera is carried. It also serves as a replacement for a worn or damaged motor of the same size in an existing build. Builders who need a smaller, lighter motor for a compact stabilised platform are the main audience.
What's in the Box
- 1 x 2208 80KV Gimbal Brushless Motor
- 3 x socket head cap (Allen) bolts for motor fitting
Quick specs
- Item Type
- Brushless Gimbal Motor
- Model No. / Name
- 2208
- Connector Type
- Servo(Futaba/JR)
- Cable Length
- 20
- Load Capacity (gm)
- 100 ~ 200
- Poles
- 14















