
1 / 3 · Click to enlarge
AI Summary
A 2805 140KV brushless gimbal motor pre-wound for smooth torque and sized for GoPro-class cameras around 100-300g. Its flush mounting, preloaded bearings and servo-style connector make gimbal builds simpler.
Key Highlights
- 140KV winding tuned for smooth gimbal torque
- Sized for GoPro-class cameras weighing 100-300g
- Flush mounting for simple DIY and pro integration
- Preloaded bearings reduce play for precise mounting
- Servo-style connector for plug-and-play controller hookup
- Flexible cable assembly supports efficient balancing
Ideal For
- Drone builders assembling a GoPro-class camera gimbal
- DIY makers upgrading a small stabilization rig
- Aerial videographers building a lightweight stabilized platform
- Hobbyists pairing motors with a brushless gimbal board and IMU
- Technicians replacing a motor in an existing small gimbal
Buying Tip
Confirm your camera weighs within the 100-300g range and that your gimbal controller accepts a servo-style connector before ordering.
Elecvora expert review
Our verdict
A sensible, value-focused motor for small camera gimbals, with the winding and mounting style that stabilization work actually needs. It suits builders who already have a controller and frame and want a straightforward plug-in drive unit.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Pre-wound 140KV winding for smooth gimbal torque
- Flush mounting and lean profile ease integration
- Preloaded bearings reduce mount play
- Servo-style connector simplifies controller hookup
Cons
- Limited to GoPro-class payloads around 100-300g
- Gimbal controller, frame and IMU are not included
- No detailed electrical ratings published for advanced tuning
Best for
Small GoPro-class camera gimbal builds
Not ideal for
Heavy camera payloads or propulsion use
Specifications
| Shipping Weight | 0.043 kg |
|---|
What's in the box
- 1 x 2805 140KV Gimbal Brushless Motor
Frequently Asked Questions
What camera size is this motor intended for?
Can I use it with any gimbal controller?
Is this motor for propulsion or stabilization?
What is included with the motor?
Why do preloaded bearings matter?
How should I care for the motor?
Overview
The 2805 140KV Brushless Gimbal Motor is a compact drive motor built for multi-rotor camera stabilization. It is pre-wound for optimal torque and smoothness, giving you a dependable starting point for a gimbal build rather than a generic motor that needs reworking. Its lean profile and flush mounting make it easy to fit into both DIY setups and more polished professional rigs.
This motor is intended for GoPro-class cameras in the 100-300g range, one of the most common payload classes for handheld and aerial gimbals. If you need a lighter, lower-torque option instead, a smaller 2208 80KV motor is the alternative to consider.
Key Features
- Pre-wound 140KV winding: configured for smooth, consistent torque rather than high-speed spinning.
- Flush mounting: keeps installation straightforward on flat gimbal plates and brackets.
- Preloaded bearings: help minimize slop for a more precise, stable camera mount.
- Servo-style connector: simplifies connection to compatible gimbal controllers.
- Flexible cable assembly: supports clean routing and efficient balancing through the motor's working life.
- Plug-and-play wiring: the wire and connector assembly is ready to connect without custom harness work.
Specifications Explained
2805 refers to the motor's stator dimensions, a compact size suited to lightweight camera gimbals. 140KV describes the winding: a low KV value means the motor turns slowly with higher torque, which is exactly what a gimbal needs to hold a camera steady without jitter. Together, these figures tell you this motor is designed for controlled positioning, not propulsion.
The preloaded bearings matter for image quality. Any looseness in the mount shows up as vibration or drift, so a bearing setup with preload helps keep the camera axis tight. The flush mounting pattern and lean profile then make it easier to fit the motor into tight gimbal frames.
Compatibility and Requirements
This motor is designed as a match for brushless gimbal stabilization boards and IMUs, and its servo-style connector is intended for direct connection to compatible gimbal controllers. It suits GoPro-class cameras weighing roughly 100-300g. A gimbal controller and the rest of your gimbal frame are required to complete a build; these are not included.
Typical Uses
- DIY multi-rotor camera gimbals
- Professional aerial video stabilization builds
- Handheld stabilizer projects for GoPro-class cameras
- Repair or upgrade of an existing small gimbal
What's in the Box
1 x 2805 140KV Gimbal Brushless Motor.















