Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The BGC v3.15 is an 8-bit brushless gimbal controller for 2-axis camera stabilization, delivering 2.8A per motor with multiple safety protections. Configure it easily via the SimpleBGC GUI on PC, Mac, Linux, or Android.

Key Highlights

  • 2.8A continuous current per motor, 7.1A short-time peak
  • Supports MPU6050 sensor via I2C interface
  • Overcurrent, overheat, under-voltage, and reverse polarity protection
  • Configurable via SimpleBGC GUI on multiple platforms
  • Compact 52 x 52 mm board with M3 mounting holes
  • Backward compatible with newer 32-bit GUI and upgrade path

Ideal For

  • DIY enthusiasts building custom camera gimbals
  • Professionals needing reliable 2-axis stabilization
  • Hobbyists upgrading from older gimbal controllers
  • Educational projects teaching brushless motor control

Buying Tip

Remember to use a 12V (3S) power supply and never power the board before the camera is securely mounted and balanced.

Elecvora expert review

Our verdict

The BGC v3.15 is a proven 8-bit controller that offers solid performance for 2-axis gimbal builds at an affordable price. While newer 32-bit boards exist, this board remains a reliable choice for hobbyists and professionals who value simplicity and compatibility.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • High current capacity per motor
  • Comprehensive protection features
  • Broad software compatibility
  • Easy upgrade path to 32-bit

Cons

  • Requires separate power supply
  • Limited to 2-axis without extension board
  • Firmware should not be updated to avoid connectivity issues

Best for

DIY gimbal builders on a budget

Not ideal for

Users needing advanced 3-axis control out of the box

Specifications

Item TypeBrushless Gimbal Controller Driver
Max. Current to each Motor2.8 A
Short Time Current7.1 A each Motor
Output Current Regulation8 or 32 kHz PWM
Interface TypeI2C
Supported sensorsMPU6050
Overcurrent protectionYes
Overheat ProtectionYes
Under-Voltage Protection (V)Yes
Reverse Polarity ProtectionYes
Dimensions (L x W x H) mm52 x 52
Cable Length30
Mounting Hole Diameter (mm)M3
Shipping Weight0.06 kg
Shipping Dimensions10 × 7 × 2 cm

Frequently Asked Questions

What power supply does the BGC v3.15 require?
A 12V power supply, such as a 3S LiPo battery, is recommended for proper operation.
Can I use this controller for a 3-axis gimbal?
Yes, but you will need an extension board (not included) to add the third axis.
What software is used to configure the board?
The SimpleBGC GUI, available for PC, Mac, Linux, and Android, is used for configuration.
Is the firmware updatable?
It is not recommended to update the default firmware, as new firmware may cause connectivity issues with your computer.
What sensors are supported?
The board supports MPU6050 sensors via the I2C interface.
What is included in the package?
Package contents are not specified; please refer to the product listing for details.

Overview

The BGC v3.15 is an 8-bit brushless gimbal controller board for building 2-axis camera stabilization systems. It is the original BaseCam SimpleBGC design, formerly known as AlexMos, and remains a popular choice for DIY gimbal projects. With a maximum current of 2.8A per motor and short-time peaks of 7.1A, it can drive a variety of brushless motors for smooth camera movement. The board includes comprehensive protection features and is configured through the SimpleBGC GUI, available for PC, Mac, Linux, and Android.

Key Features

  • High current output: 2.8A continuous and 7.1A short-time current per motor for reliable performance.
  • Sensor support: Works with MPU6050 sensors via I2C interface.
  • Multiple protections: Overcurrent, overheat, under-voltage, and reverse polarity protection safeguard the board and your equipment.
  • Flexible configuration: Adjust settings using the SimpleBGC GUI on your preferred platform.
  • Compact design: 52 x 52 mm board with M3 mounting holes for easy installation.
  • Upgrade path: Compatible with newer 32-bit GUI and allows future upgrades to 32-bit boards.

Specifications Explained

The 2.8A continuous current per motor indicates the board can handle typical brushless gimbal motors for camera payloads. The 7.1A short-time current provides extra headroom during sudden movements or startup. Output current regulation is via 8 or 32 kHz PWM, which helps maintain smooth motor control. The I2C interface connects to an MPU6050 sensor for stable feedback. The 52 x 52 mm dimensions and M3 mounting holes make it compatible with many gimbal frames. The included 30 cm cable provides flexibility during installation.

Compatibility and Requirements

This controller is designed for 2-axis gimbal systems and can be expanded to 3-axis with an extension board (not included). It requires a power supply; a 12V (3S battery) is recommended. The board uses firmware and is configured via the SimpleBGC GUI, which must be at or newer than the board's firmware revision. Note that only 8-bit firmware should be used with this 8-bit board. The GUI is available for PC, Mac, Linux, and Android.

Typical Uses

Ideal for DIY camera gimbals, handheld stabilizers, and custom 2-axis setups for DSLR or mirrorless cameras. Also suitable for educational projects and hobbyist builds requiring precise camera stabilization.

What's in the Box

Package contents are not specified. Please check the product listing for details.

Quick specs

Item Type
Brushless Gimbal Controller Driver
Max. Current to each Motor
2.8 A
Short Time Current
7.1 A each Motor
Output Current Regulation
8 or 32 kHz PWM
Interface Type
I2C
Supported sensors
MPU6050
See all specifications