
1 / 4 · Click to enlarge
AI Summary
A 28-pin ZIF socket with lever action for damage-free IC insertion and removal. Ideal for programming and testing DIP chips on a breadboard or programmer.
Key Highlights
- 28-pin ZIF socket with lever-actuated clamping mechanism
- 2.54mm pitch suits standard DIP ICs
- Through-hole mounting for breadboards and PCBs
- Gold-plated pins for durable, low-resistance contacts
- Compact 50mm x 22mm footprint weighs just 16g
- 1A operating current supports common logic ICs
Ideal For
- Electronics hobbyists programming DIP microcontrollers
- Students building breadboard prototypes
- Repair technicians testing 28-pin ICs
- Makers who frequently swap chips in and out
- Anyone needing a solderable ZIF socket for PCB work
Buying Tip
Confirm your IC is a standard-width DIP package, as this socket does not accept narrow DIP chips.
Elecvora expert review
Our verdict
A practical, no-frills ZIF socket that does exactly what it should: protect your 28-pin DIP ICs during repeated programming and testing. The gold-plated pins and sturdy lever action make it a reliable bench accessory.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Zero insertion force prevents pin damage
- Gold-plated pins for stable connections
- Standard 2.54mm pitch fits breadboards
- Compact and lightweight
Cons
- Does not fit narrow DIP packages
- Requires soldering for permanent PCB installation
Best for
Hobbyists and technicians who frequently program or test 28-pin DIP ICs.
Not ideal for
Users working with narrow DIP or surface-mount chips.
Specifications
| Manufacturer | Generic |
|---|---|
| Mounting Type | Through Hole |
| Operating Current (A) | 1 |
| Pitch Spacing (mm) | 2.54 |
| Length (mm) | 50 |
| Width (mm) | 22 |
| Weight (g) | 16 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 28 Pin ZIF Socket
Frequently Asked Questions
What is a ZIF socket used for?
Does this socket fit all 28-pin ICs?
Can I use this socket on a breadboard?
What is the operating current?
What is included in the package?
How do I care for the socket?
Overview
The Generic 28 Pin ZIF Socket is a zero-insertion-force IC socket built for situations where chips need to be inserted and removed frequently without stress on their pins. A lever on the side of the socket opens the internal clamps, allowing a 28-pin DIP IC to drop into place with minimal force. Lowering the lever closes the clamps and secures the chip for programming, testing, or normal operation. This makes it a useful accessory for anyone working with programmable ICs, from hobbyists to repair technicians.
Key Features
- Lever action: Opens and closes the contacts for effortless insertion and removal.
- 28-pin capacity: Accepts standard 28-pin DIP packages (not narrow DIP).
- 2.54mm pitch: Matches common breadboard and PCB hole spacing.
- Through-hole mounting: Pins solder into PCBs or plug into breadboards.
- Gold-plated pins: Contribute to stable connections and long service life.
Specifications Explained
The 2.54mm pitch is the standard spacing for most DIP ICs and prototyping boards, so the socket aligns with typical breadboard holes. Through-hole mounting means the socket has pins that can be inserted into a PCB and soldered, or pushed into a breadboard for temporary setups. The 1A operating current rating covers the needs of most logic and memory ICs used in development. Measuring 50mm long and 22mm wide, the socket occupies a modest area on a board. At 16 grams, it adds negligible weight to your project. The gold plating on the pins helps maintain low contact resistance over repeated use.
Compatibility and Requirements
This socket is intended for 28-pin DIP integrated circuits. It does not suit narrow DIP packages, so check your chip's width before ordering. The socket requires no external power; it is a passive component. For breadboard use, the through-hole pins plug directly into standard 2.54mm spacing. For permanent installations, soldering is required.
Typical Uses
- Programming microcontrollers and EEPROMs
- Testing and swapping DIP ICs during prototyping
- Breadboard projects that need a removable chip
- Repair and diagnostics benches
What's in the Box
1 x 28 Pin ZIF Socket.

Quick specs
- Manufacturer
- Generic
- Mounting Type
- Through Hole
- Operating Current (A)
- 1
- Pitch Spacing (mm)
- 2.54
- Length (mm)
- 50
- Width (mm)
- 22














